How long does it take to plate the small leaf red sandalwood bracelet

Updated on collection 2024-07-20
5 answers
  1. Anonymous users2024-02-13

    Glad to answer for you :In fact, you don't have to think about the red sandalwood plate is very complicated, there is no strict time limit, you can play more when you have time, and it doesn't matter if you are busy and don't play for a day. Rosewood bracelet play is actually very simple, is to sew a cloth bag with a towel to put the bracelet inside to play, every day after tea and dinner to play for one or two hours, continuous plate play for two months can form a pulp, the formation of pulp after the small leaf red sandalwood can be worn by hand, but during the red sandalwood bracelet play should pay attention to keep the bag clean and dry, there are sweat or water stains after cleaning and replacing in time, do not let sweat or water wet the bracelet, otherwise the future of the bracelet will become black and lusterless.

    In addition, when not playing, it is necessary to pay attention to relatively sealed storage, and do not put it around the hot object, otherwise it is easy to crack.

    Hope mine is helpful to you.

  2. Anonymous users2024-02-12

    It is best not to get started directly. Use a whole white cloth or white towel, 90% cotton will do. Play with a cloth plate for a week to 2 weeks, there is a layer of light pulp can get started, the main way to play is to often rub on the hand, pay attention, can not rub the beads with wet hands.

    But for gloomy wood, not afraid of waterproofing. When discing, use lighter force, pay attention to try to touch the whole bead, do not only plate the surface, ignore the control of the periphery, and after a period of time, disassemble the bracelet, break the original order of the string and then distant, so that the disc will be uniform and good-looking. In this way, after a long period of playing, the friction of the human hand against the wood gradually forms the slurry.

    Then, how to keep it shiny.

    It is normal for the small leaf red sandalwood bracelet to turn black and not light up after wearing, but it is not a condition that cannot be improved. The wood itself produces a wood pulp that acts like a protective film to lock in moisture and maintain its shine. Kneading the wood balls can make the pulp secrete.

    Try not to get a lot of water, and wipe it off as soon as it does. When not wearing, store in a sealed bag away from light.

    Furthermore, avoid rushing for quick success.

    The most taboo of the beads is to rush for quick success, you can only take your time to come one process at a time, and you can also get a kind of spiritual pleasure at the same time with the change of the beads. Everything is the same, not only do we bring an object and something, but more importantly, we learn from the process of the plate, to cultivate self-cultivation, put some of our impetuous character, irritable temper, in the process of playing, constantly introverted, constantly sublimated, this is the essence of play.

    Finally, how to maintain the small leaf red sandalwood bracelet.

    It should not be exposed to the sun for a long time and crack. It should not be placed in a very noisy or dry room. It should not be placed near open flames, fire walls, ondols, and stoves.

    It is not advisable to wipe with a towel with water, and it is better to wipe it with a cotton towel. Correct storage method: put it in a sealed bag to protect it from light, and often play with it to form a uniform slurry on the surface of the beads.

    Try not to get wet when wearing, and occasionally dry it in time to avoid affecting the quality of the beads. It is absolutely not allowed to be worn in the bath. The whole bead will soak until it turns white.

    It's ugly.

  3. Anonymous users2024-02-11

    The material is good and can be put for a hundred years. Rosewood was first found in tropical forests and islands in India. Chinese love rosewood, since the Shang and Zhou dynasties, it is a good furniture material for chariots and courts, and it is the world's top furniture material.

    The treasure house of the Shokain Temple in Nara, Japan, where the artifacts of the emperors of the past dynasties are preserved, includes several ebony artifacts given to the emperor during the Tang Dynasty of China. According to historical records, in the Sui and Tang dynasties, China began to use ebony and red sandalwood to make furniture and handicrafts. The Tang Dynasty was a period of maturity for Chinese furniture, and it was a major leap in the history of furniture development.

    China's furniture art has a long history of development, and in its long development process, it has formed a unique charm of Chinese furniture characterized by "material beauty and ingenuity". "If you want to do a good job, you must first sharpen your tools." Traditional Chinese furniture is the product of the ingenuity of skilled craftsmen and beautiful materials.

    Among the traditional Chinese furniture, red sandalwood furniture can be said to be a very distinctive type of furniture.

  4. Anonymous users2024-02-10

    Do not get any oil, including oil on your hands, face, or oil. People who sweat easily should wear gloves and do not use sweaty hands to directly coil the beads. It cannot be wet, let alone washed; When the humidity is particularly high, it is not advisable to coil the beads.

    After using the handpan, it cannot be put down casually, and it needs to be wiped with a muslin cloth.

    Extended information] First, basically the wood friends who coiled the beads into black briquettes were because they did not do the above points. Some of them are dipped in water and "rub their hair" with the beads, which become dull and dull. Some not only from the beginning of the handpan, even for the sake of a moment of oil, deliberately rubbed oil on the face with beads, after a period of time, the beads wrapped in a thick layer of oil sludge, but also thought that they were dished out of the "pulp", and after a period of time found that the beads completely turned into briquettes!

    2. Remind again: all wooden bracelets must remember to avoid oil and water! But if it really comes to this point, in fact, there is no need to be discouraged, there is still a solution, and it can be saved by the following methods.

    The first way is to continue to play, but in the right way, with gloves, you can click hard, persevere, play with the dirty things on the surface of the bracelet, after a long time, the beads will become shiny.

    Third, it is to use a bath towel plate that has misled many people. In the small leaf red sandalwood plate playing method circulating on the Internet, many versions mention that "you should first wipe off the dirty substances and wax layers on the surface of the beads, and use a bath towel to rub it, about two or three hours a day, and insist on it for two days."

    Fourth, I don't know who wrote this method under what circumstances, and it is likely to be copied from the game of Bodhi. Now what will be dirty on the surface of the small leaf red sandalwood when it leaves the factory? Although there will be bad merchants who wax, the slightly oily small leaf red sandalwood with high-mesh sandpaper polishes the luster is much better than waxing, so why bother painting snakes.

    Although it is common sense, this method is very widely circulated on the Internet and does mislead many people. If you really rub it with a bath towel, the beads with a slightly higher number of polishing mesh will definitely be scratched off, which is equivalent to reducing the number of polishing meshes and going back.

    Fifth, it is not recommended to use a bath towel for new beads, but when the beads are made into black briquettes, and the surface is indeed dirty with black oil sludge, it is a good way to rub the bath towel at this time, which is equivalent to returning to the furnace and rebuilding again, and then using a cotton cloth to carefully dish.

    Sixth, another method is to use sandpaper to polish the hand string through the body, that is, to grind off the surface of a layer, so that it can be reborn, and then start from scratch, with the right way to play on it, the above is in case the red sandalwood beads become black after the method, it is best to use the following method from the beginning of the correct plate play.

  5. Anonymous users2024-02-09

    01 Pan small leaf red sandalwood bracelet, first of all, we must figure out what the plate means, the plate, in fact, is the meaning of playing with hand beads. The disc is not casually coiled, and an oxide layer needs to be formed on its surface before the disc is dished. Wipe clean with a soft, clean cloth and repeat for 3 to 7 days, then place in a sheltered place to rest.

    Then put on gloves and play for about 30 minutes every day, so that you can carefully rub the small leaf red sandalwood bracelet for 3 months.

    After the small leaf red sandalwood bracelet is purchased, it is necessary to first polish the surface, remove dust and impurities, and form an oxide layer on the surface before you can play with the handpan. Start by using a soft, clean soft cloth, wipe it clean and repeat for 3 to 7 days.

    Then leave it in a cool, sheltered place for a period of time to allow it to dry naturally and slowly oxidize. Proper careful rubbing with a clean towel or gauze can not only polish and polish, but also speed up the oxidation. Finally, put on gloves and take half an hour a day to rub the small leaf red sandalwood bracelet to make its surface brighter.

    Usually after 3 months, the small leaf red sandalwood can quickly form a pulp, and it can be played and worn directly on the handpan.

    However, there is no fixed process for playing small leaf red sandalwood, but the simplest and best way is: "Astringent, brightened" These 6 words. "Astringent" means that we feel astringent in the process of playing, and the brightness is gone, and there is a slight slimy feeling.

    This is the small-leaved red sandalwood out of the slurry, at this time we should put it, the role of the slurry is to solidify the slurry, so that the slurry is not lost. As for how long it will last, this is not fixed, until it is lit. Because the temperature of each region is different, the air humidity is different, and the amount of slurry emitted by the small leaf red sandalwood bracelet is different, so the slurry curing time is also not fixed.

    "Bright plate" means that the small leaf red sandalwood bracelet pulp has been cured, and this is the time when we should plate it. Let the hand string out more pulp. As for how long the plate is, there is no fixed time.

    Until it feels astringent and slightly slimy.

    Disc play tools: thickened cotton gloves or deerskin gloves (equivalent to 5000 grit sandpaper sanding). If you're a hand that doesn't sweat, you're born with a pair of hands that play with bracelets. Hands that don't sweat work better than any cotton and buckskin gloves.

    Precautions: Do not contact water, do not sweat, especially alcohol, because alcohol will have a chemical reaction with pterostilbene in the lobular pterosandalwood and cause pterostilbene loss. Do not put vents to avoid wind cracking.

    If the wind cracks, don't worry, because the small-leaved red sandalwood is the wood with the best oily density, and the small wind cracks will heal on their own.

    Panxiaoye red sandalwood bracelet is actually such a kind of exercise, of course, in a narrow sense, every day always such an exercise on their own hand muscles, brain nerves have certain benefits, if it is a relatively old age, can prevent aging.

Related questions
32 answers2024-07-20

All wooden bracelets, if you want to plate out the perfect glass bottom, the most important one is not to be in a hurry to wear it on your wrist, don't wear it in summer, you must use gloves to plate, slide the plate astringently, and put less plate and more in the later stage! I have a yellow pear and a small leaf red sandalwood bracelet, I have been on the plate for six years, I have never worn it, it has long been out of the glass bottom, and it feels warm!

8 answers2024-07-20

Identification Methods. 1. Take a piece of wood and scratch it on white paper, if it is sandalwood and red sandalwood, there are purple-red scratches, and use the same strength to scratch the second time and ...... the third time, the scratch fades to disappear; If there are scratches, proceed to the next step. >>>More

12 answers2024-07-20

Landlord: Hello. It is indeed ** small leaf red sandalwood, scientific name: sandalwood red sandalwood. >>>More

8 answers2024-07-20

1. Background color. The so-called clean background color refers to the ruddy color, the same color and texture (that is, the so-called same material along the grain), the selection of beads background color must not be white, gray, brown or even with white skin. The background color of the small leaf red sandalwood should be dark red, and there should be a deep and atmospheric feeling, rather than a very bright and floating feeling. >>>More

8 answers2024-07-20

1 The small-leaved red sandalwood fades, which is also a problem we often encounter, the small-leaved red sandalwood will not fade, but it will stain. The redness and dyeing of the small-leaved red sandalwood is one of its characteristics, especially when the small-leaved red sandalwood material has just opened and the Buddha beads have just been made. >>>More