Can you help me see what the hydroponic brazilwood grows white? 50

It's some calcium carbonate.

to Brazilwood. The epidermis will not have much effect, do not deal with it. To carry out hydroponics of brazilwood, nutrient solution.

It is very important, it is recommended to prepare an acidic nutrient solution containing nitrate nitrogen, and immediately after planting in Brazilwood, use it with the diluted nutrient solution, and pour the nutrient solution thoroughly, and the exuded nutrient solution can be seen at the bottom of the pot, which is watered thoroughly.

In addition to this, it is recommended that you can spray some potassium dihydrogen phosphate on the leaves of seedlings.

Aqueous solution that helps in the growth of seedlings. In addition to this, it is also important to replenish the nutrient solution and water in time to prevent the salt content in the substrate from being too high, when ceramsite.

When hoarfrost appears on the surface, it is recommended to wash the salt from the cultivation medium.

Because your brazilwood is hydropontic, there's definitely a section that's soaked in water. If you use tap water and go to raise brazilwood, there will be some limescale in the water over time. It crystallizes on the canopy of brazilwood.

Actually, it's some calcium carbonate. These things just don't look good, but they shouldn't have much effect on the brazilwood skin. So no special treatment is required.

For example, in hydroponics, minerals in the water are deposited on the trunk of a tree.

The main ingredient is calcium carbonate, which is the limescale inside the kettle. Like the stalactites in the cave, the stalactites and stalagmites are similar in composition.

This is either some dirt in the water, or some sugar stains or something.

The water quality deteriorates, and the long-term failure to change the water will cause the brazilwood to fail to take root, and the water needs to be changed every 3 5 days; Lack of nutrients, lack of nutrients in the water will also make Brazilwood unable to grow new roots, after changing the water, you need to add 2 3 drops of nutrient solution; Strong light exposure, too strong light will also make the root system of Brazil wood burned and unable to take root; If the temperature is too low, the root system will not be able to grow normally in a low temperature environment, so it is necessary to raise the room temperature in time to alleviate it.

In the process of maintaining hydroponic brazilwood, if the water is not changed for a long time, the water quality will deteriorate, which will affect the normal growth of the root system and make it unable to grow new roots. During the hydroponic period, the water needs to be changed every 3 to 5 days, and you can choose pure water that has not been polluted or well water, etc., if you use tap water, you need to dry it for 2 to 3 days in advance before using it.

Brazilwood generally can only absorb nutrients from water, if you do not add fertilizer to the water for a long time, the root system will not be able to absorb nutrients, which will make the root growth in a stagnant stage. Therefore, after each water change, 1 2 drops of nutrient solution need to be added dropwise to supplement nutrition. If there is no nutrient solution, you can choose to use white sugar or vitamin C powder instead of fertilizer.

Brazil wood itself has a certain resistance to negative and strong light exposure, if it is placed in strong light in summer, it will make the root system burned, unable to root normally. It needs to be transferred to a ventilated and cool astigmatism place in time for maintenance to ensure the ventilation of the environment and make it take root as soon as possible.

Brazilwood itself is not cold tolerant, and if it is kept in a low temperature environment for a long time, the root system will be frostbitten and the growth will be in a stagnant stage. Therefore, after winter, it needs to be transferred to a warm room for maintenance in time to stabilize the room temperature above 15.

Hydroponic brazilwood can not be soaked in water all the time, if the root system is soaked in water for a long time, it will make it rot and blacken, hydroponic breeding can be transplanted into the potting soil after one year of maintenance. Soil cultivation method: prepare soil, mix nutrient soil, river sand soil, and river soil to make cultivation substrate; Under light conditions, 3 hours of astigmatism should be given every day at the beginning of potting; Watering and fertilizing, the soil needs to be watered in time after it is dry, and organic liquid fertilizer should be applied every 15 to 20 days.

Hydroponic brazilwood cannot be soaked in water all the time, and if the root system is soaked in water for a long time, it will rot and blacken, and the leaves will also turn yellow, and the overall ornamentality will also decrease. After 1 year of cultivation, brazilwood will grow 2 3 cm roots, at which point it needs to be transplanted into potting soil to avoid long-term growth in a humid environment that will cause the leaves to rot.

1. Potting soil selection

When cultivating Brazil wood, loose and breathable soil can be selected as the substrate for cultivation, and when the soil is matched, the nutrient soil, river sand soil, and river soil can be mixed in a ratio of 3:1:1 to make the cultivation substrate.

Before potting, the soil needs to be placed in the sun for exposure to disinfection to kill the bacteria generated inside, and after the potting is completed, it is necessary to water the root water once to soak all the soil.

2. Lighting conditions

After potting, Brazilwood needs to be transferred to a ventilated and astigmatized environment for maintenance, in the early stage of potting, 3 hours of light should be given every day, and after Brazil wood takes root in the soil, no less than 6 hours of light should be given every day to promote the growth of branches, leaves and roots.

3. Watering and fertilizing

When watering Brazilwood daily, you need to turn over the soil every 2 3 days, turn the soil about 3 cm, check the moisture level inside, if you find that the soil is dry inside, you need to water it immediately to make the potting soil in a moist state. In addition, a thin organic fertilizer solution needs to be applied every 15 to 20 days to replenish the nutrients needed for the growth of the plants.

Brazilwood is cultivated hydroponically, and if it is not successful, it is not hydroponics, and as for how long it can live, it is said that the cultivation of hydrobacon is successful.

What we cultivate:

This has taken root, just plant it in a pot, my roots have not grown well in your pots, and now they have begun to bloom after two years.

If the temperature is low, it will be rotten, and it can be remedied with rooting powder and agent.

Summary. The branches of brazilwood are too thin because of a lack of light, nutrients and nutrients. Although it is shade-tolerant, it also prefers soft light.

The branches of brazilwood are too thin because of a lack of light, nutrients and nutrients. Although it is shade-tolerant, it also prefers soft light. Usually let it bask in more sun, and it will accumulate more nutrients when the sun is sufficient.

Regular topdressing during the growing season, generally 20 days to sprinkle orange late fertilizer, dilute liquid fertilizer can also be.

After all, the nutrients in the water are not as abundant as in the soil, so it is necessary to add nutrient solution regularly, so that the water surface submerges one-third of the branches, and in the hydroponic process, Kexiang is short to change the water for Brazilwood every three days, and add nitrogen fertilizer, or phosphorus and potassium fertilizer every one or two decades.

Will this slender grow now if you start to nurture it now? I have 2 branches in hydroponics now, will they still sprout? A stump can sprout several buds.

Now happily begin to carefully raise can be stout, a stump generally three to four buds.

Nutrient water is used for hydroponics.

If you want to carry out the hydroponics of brazilwood, the nutrient solution is very important, it is recommended to prepare an acidic nutrient solution containing nitrate nitrogen, and immediately after the planting of brazilwood, it will be used with the diluted nutrient solution, and the nutrient solution will be poured thoroughly, and the exuded nutrient solution can be seen at the bottom of the pot, and this state is watered thoroughly.

In addition, it is recommended that you can spray some potassium dihydrogen phosphate aqueous solution on the leaves of seedlings, which will help the growth of seedlings. In addition to this, it is also important to replenish the nutrient solution and water in time to prevent the salt content of the substrate from being too high, and when hoarfrost appears on the surface of the ceramsite, it is recommended to clean the salt in the cultivation medium.

It is not normal for the bottom of hydroponic brazilwood to have blackening and needs to be remedied in time. Remedies for blackening at the bottom of hydroponic brazilwood: 1. Prune diseased branches, clean blackened bottoms, repair dead branches, diseased branches, and rotten roots; 2. Soak and disinfect, soak with potassium permanganate solution for half an hour; 3. Dry hydroponics and dry it in a cool and ventilated place for 2-3 days.

There are many reasons that can cause the bottom of hydroponic brazilwood to turn black, which is an abnormal phenomenon, such as lack of sunlight and too little light; The water is turbid, bacteria grow, etc. Whatever the reason, when you find that the bottom of the brazilwood is black, you can't turn a blind eye and take remedial measures in time.

1. Prune diseased branches

Take the brazilwood out of the water, rinse the blackened bottom with clean water, rinse it clean, scrape off the blackened parts with a sterilized tool, prune the root system, and repair all the dead branches, diseased branches, and rotten roots.

2. Soak and disinfect

Soak brazilwood with potassium permanganate solution for about half an hour to thoroughly sterilize and disinfect to ensure the health of the root system. The poor toxicity can reduce the growth of lead celery bacteria to a certain extent, so that the growth environment is more conducive to the development of plants.

3. Dry hydroponics

Dry the brazilwood in a cool and ventilated place for 2-3 days to ensure that the wound is completely dry, and then put it in a container with fresh, clean water to continue the culture, taking care not to use tap water that has not been sterilized.