How does a Dyson vacuum cleaner clean up dust, and how does a Dyson vacuum cleaner pour out the dust

Hello dear! The specific steps for cleaning a Dyson vacuum cleaner are as follows:

Tools: cold water, Dyson vacuum cleaner.

1. Before cleaning, gently tap the filter to remove residual dust and debris.

2. Only use cold water to clean the filter device, turn the filter cotton downward, and let the cold water flow through the folded filter paper.

3. Continue to rinse until the water flow becomes clear, let the cold water flow the inside and outside of the filter cotton, and gently squeeze the foam to discharge the dirt.

4. Fill the strainer with cold water, cover both ends with both hands, and shake gently.

5. Repeat this step until the water becomes clear, gently shake the strainer to remove excess water, and place the strainer device for at least 24 hours to dry thoroughly.

6. Before reinstalling, check whether the filter is completely dry, and when installing, please rotate the filter clockwise until it clicks into place.

First of all, disassemble the shell, clean the surface, pry open the buckle with a driver, and find that it is dirty after opening, brush off some of the dust first.

Then look for the plum screwdriver, continue to disassemble, and then hold the handle with your hand and pull it out, you can see the black layer. There are screws inside, continue to disassemble, clean, wash and cool, and install them back after drying.

The general model is to press the red button indicated by the red arrow, press the dust groove once to open, and press the dust groove twice to completely open and take it down.

**V10, is to push the red button to the left, it is best to put the mouth down and then push, the dust is poured out directly!

One is a more troublesome way to pour dust, common V8, we need to press the switch, one hand upward, one hand downward, separate the dust cup, you can pour dust directly, but avoid facing the dust cup when doing this, otherwise the dust will pounce on your face.

The other one is very simple, we all call it a key dust, which is also a very popular way to pour dust, directly press a switch, the bottom of the dust cup will automatically open, and the garbage will be poured out. That means you won't get your hands dirty, and the dust won't hit your face when it pours down.

Finger butler is such a dust-pouring device, our garbage is now in the dust cup for anti-virus, and then poured out, so that there is no fear of secondary pollution, clean and hygienic.

The steps are as follows: Demo brand: Dyson.

Demo device: V10 motorhead

1. When the garbage reaches the MAX mark, the dust bin needs to be emptied.

2. Remove the vacuum rod first.

3. Hold the fuselage with your right hand and the dust collector facing downward.

4. Push down the dust collector release lever (here is the release lever).

5. Remove the dust collector and clean it with a damp rag.

6. After the dust collector is dried, it is re-installed in its original position.

Here's how a Dyson vacuum cleaner cleans up dust:

Tools: Dyson V8 vacuum cleaner, garbage bag, brush, cold water.

1. You need to press the dust removal switch of the dust collection cup to clean up the dust and debris in the cup (it is best to use a garbage bag to catch the fallen dust below to avoid secondary pollution of the environment).

2. Press the switch down again, at this time, you can directly separate the dust cup from the body, use a brush to clean up the wool and dust attached to the body (do not use water), rinse the dust cup with water and dry, and put it back as it is after drying.

Introduction to Dai Jufeng Jingsen vacuum cleaner

Dyson's vacuum cleaner has a total of four series, namely V7 entry, V8 standard, V10 advanced, V11 top model, of which the entry model is not recommended, and the V11 top model can only be said to be a local tyrant to choose, it is worth recommending the V8 standard model and V10 advanced model. The performance of these two is actually about the same, but the first is the national version, and the second is the international version (European version, original import), the difference is that the international version needs to convert the plug, and the accessories of the international version will be one more than the national version.

Choose between these two: if you need deep cleaning, and need to clean such as blind spots under the bed, with a family area between 90 square meters and 120 square meters, choose V10; If there is no need for deep cleaning, it is rare to clean places such as the bottom of the bed, and the family area is less than 90 square meters, choose V8.

Remove the Dyson vacuum.

Dust on the tip can be taken apart and cleaned with a toothbrush and a dry towel.

The specific steps are as follows:

1. Remove the dust collector first, just press two thumbs, you can open the red mechanism of the bottom cover of the dust collector, press it all the way to the end, the cylinder will pop out, and then clean the floating ash with a toothbrush.

2. The spiral cyclone separator should be removed from the handle.

cylinder, please use a small screwdriver.

Pull it out of the white bayonet position, disassemble it, detach the handle from the cylinder, and wipe the dust with an electrostatic towel.

3. Then clean with water or directly with water without detergent.

4. Wait for the parts to air dry, do not expose to sunlight, pay attention to the clamping position of the joint, when each position is in place, a clicking sound will be heard.

In addition to absorbing dust on the floor, the vacuum cleaner also absorbs cereal, snack crumbs, and ground coffee, so if you don't clean the dust bucket, it will become unpleasant. So we have to pay attention to the cleanliness of the vacuum cleaner, how to disassemble the dust bin of the Dyson vacuum cleaner, because the appearance of this one is not very eye-catching, so we take it as an example.

First of all, we can take out its filter, there is a purple round handle at the Tianling cover of the head of the handheld vacuum cleaner, pull it out, you can wash it directly, dry it and then put it back on. However, we should avoid our faces when pulling them out, otherwise the ash will rush to our faces.

The dust bucket is actually not difficult, a little more complicated, we can directly press and hold the buckle to buckle the dust cup, here is a little bit of effort, and so on after a period of time to get used to it, it's okay, but there is also a problem, that is, this ash will be thrown on people's faces, and friends with dust allergies still call your boyfriend to help you.

In fact, the Dyson vacuum cleaner dust bucket is still not too capricious, like our domestic vacuum cleaners are good, like the puppy is a magnetic dust cup, and the finger butler pours dust with one click, which is very convenient.

How to dismantle the dust bucket of the Dyson vacuum cleaner, have you learned it, or the same sentence, try to avoid our faces when dismantling.

You can remove the suction head, pour out the garbage, and clean the dust in the filter with water.

How to choose a vacuum cleaner:

1. Look at the power. The amount of power basically determines the size of the suction!

2. Listen to the sound. There is no absolute silence, only relative silence. Vacuum cleaners are all sound, which is an inherent phenomenon in the industry.

But the quality of a mold determines the volume of sound, and professional is always better than general. Delmar water filter vacuum cleaner, professional copper wire motor, strong suction, low noise.

3. Choose the shape. When purchasing, buy a vacuum cleaner with large wheels, it is best to have a soft package, so that it is easy to drag, remember to buy a soft one, so that it does not hurt the wooden floor!

4. Look at the color. Generally, the color is brighter, such as red, blue, etc., which need additional spray paint to look like a texture, and it is generally slightly more expensive. The advantage of painting is that if the appearance of the machine is dirty, it will be new when you wipe it, which is the same as the machine painting.

5. Category. At present, the mainstream of the market includes the following types of vacuum cleaners: dust cup vacuum cleaners, water filter vacuum cleaners.

a.Dust cup filter vacuum cleaner: Dust cup filtration is to separate garbage and gas through the vacuum air flow of high-speed rotation of the motor, and then purify the air through HEPA and other filter materials to avoid secondary pollution.

The advantage is that you don't need to change the dust bag often; The disadvantage is that it should be cleaned after vacuuming. Dust cup filtration is the main filtration method of vacuum cleaners at present, and now most of the vacuum cleaners are dust cup filtration, it is also an upgrade of dust bag filtration, and it also has the advantage of no consumables and avoids the secondary investment of funds.

Dyson vacuum cleaner cleaning:

First disassemble the shell, clean the surface, and then use a driver to pry the buckle open. Next, use a plum screwdriver to unscrew the screws of each part, then hold the handle of the vacuum cleaner with your hand, and push it out vigorously to remove it. Finally, take out the black layer inside and clean it up again.

Precautions for use

1. Before using the vacuum cleaner, check whether the fuse of the power supply can carry the current of the vacuum cleaner's startup and operation. (This is said in the general product manual).

2. Turn off the power switch of the vacuum cleaner, insert the power plug into the car cigarette lighter socket, start the car first, and then start the power switch of the vacuum cleaner to start operation.

3. When the dust reaches a certain level or needs to be cleaned after use, press the clip on the dust cover to open the dust cover to remove the dirt.

Dyson vacuum cleaner cleaning method:

1. Clean appearance.

The appearance of the Dyson vacuum cleaner is relatively easy to clean, generally only need to be wiped with a soft cloth dipped in soapy water, but it must not be cleaned with organic solvents, so as not to crack the appearance of the plastic, fade or lose paint, of course, it can not be cleaned with hard objects such as steel wool balls, so as not to cause damage to the body.

2. Odor removal.

Before using a Dyson vacuum, you can use cotton dipped in lemon juice and place it in the dirt bin of your Dyson vacuum. As a result, when vacuuming with a Dyson vacuum cleaner, not only does the room not smell bad, but it also wafts with a faint scent of lemon.

3. Clean the dust bag.

Remove the dust and debris from the Dyson vacuum cleaner bag, wash it with detergent, then rinse it with clean water and dry it. It is important to note that it is important to ensure that the dust bag is dry, if it is not sun-dried and put inside the Dyson vacuum cleaner, when the machine vacuums again, the dust bag will be very dirty.

Dyson vacuum cleaner use Note:

Clean up the dust in time: Clean up the debris in the barrel and the vacuuming accessories in time, the dust bag must be cleaned after each work, check whether there are any holes or air leaks, and thoroughly clean the dust grid and dust bag with detergent and warm water, and must be completely dried before use, it is strictly forbidden to use the dust bag that is not dry. Before and after each use, check whether the tuyere, pipe, and dust bags are blocked and leaked.

Check carefully: Check whether the power cord and plug are damaged, and hang the power coil on the top cover hook of the machine head after use. The machine should be handled with care and should not be hit by external force.

Pay attention to the method of water absorption: When absorbing water, the dust bag should be removed after absorbing water. Pay attention to control the water level, do not exceed 2 3, pour water in time, and check whether the air inlet is blocked or debris after the work is completed, otherwise it is necessary to clean up and check whether the floating wave is damaged.

After absorbing water, the sewage in the bucket should be completely emptied and kept dry, and then placed in a ventilated and dry place.