The bathroom is too small and I want to put the washbasin outside the toilet, but there is no water

In many unconventional drainage scenarios, we will need to use a sewage lifter to solve the problem of drainage, such as the basement bathroom, the downward jumping toilet, and in the case of the large flat floor to add and change the toilet, we need the sewage lifter to collect the sewage in the basement in its own water tank, and automatically discharge the sewage into the relatively close main sewage pipe through the sewage pipe, so as to solve the problem that the toilet has no sewer pipe.

However, with the development of modernization, we are more and more favored by the convenience brought by intelligence, and the intelligent era of sewage lifter just makes up for the vacancy of the original automatic control, so that the traditional industry of drainage can also achieve intelligent drainage, while enjoying the convenience of science and technology, it is also to create a good drainage environment.

So, how is the intelligence of the sewage lifter realized?

The intelligent sewage lifter mainly relies on the intelligent controller, through the connection of the Internet of Things, to achieve the connection between the mobile phone and the controller, so that we can control the operation of the machine and the real-time water level through the mobile phone, even if the leakage of water occurs, the mobile phone can receive the information for the first time, and the controller can automatically close the water valve, and the controller makes a full analysis of the changes in the environment to make a judgment, increasing the stability of the home environment.

Another is that the intelligent sewage lifter does not need manual regular maintenance, and its back-cleaning system can use tap water to flush out the debris attached to the inner wall of the water tank, automatically maintain the water tank environment, and its cleaning cycle and time can be debugged through the mobile phone, which is much more convenient.

In the era of intelligence, only by keeping up with the tide of the times can we conform to the trend of development, and the intelligent drainage of the bathroom without sewer pipes is also an easy thing to solve.

Make a water pipe to connect the internal drain to the water pipe.

The bathroom is too small, put the washbasin outside the toilet and you go to find it. The plumber will give you a change in rice.

You can take the open pipe to the toilet drain. The sink pipe does not need to be large, small diameter is fine.

1. Dig a well by yourself and use it to seep water. Since there is no sewer in the village, you can build a seepage well similar to a sewer by yourself. This is also set aside when building a house.

When building a house, leave an open space, which can be inside or outside the house, but do not interfere with the construction of the house.

2. Dig a septic tank in the back of the house, and then do drainage facilities in the house. Usually where the dirty water is poured, the sewage pipe is directed. The bathroom needs to make a septic tank.

If there is a drain above the sink, the following things can happen:

1.Clogged sewers.

Clogged drains are a common problem, especially in places like washbasins that are often used. Blockages can be caused by the accumulation of dust, hair, or grease in the pipes, or they can be caused by poorly designed or aging pipes. If the sewer line is clogged, you need to find the location of the blockage first, and then fix the problem by repairing or replacing the pipe.

2.Sewer overflow.

If the sewer pipe is not properly designed or the sewer capacity is insufficient, there is a risk of a sewer overflow. This can lead to sewage overflows, pollute the environment, and even affect lives. To solve this problem, the structure of the sewer needs to be redesigned and the sail capacity of the sewer be expanded to better treat the sewage.

3.Aging of pipes.

Aging pipes are also a common problem. If it is used over a period of time, the sealing performance of the pipe may be reduced, which can lead to leakage in the sewer. If the problem of aging pipes is found, it is recommended to replace the pipes in time to avoid environmental impact.

How to solve the problem of a sewer above the washbasin?

1.Clean the pipes regularly.

Cleaning your drains regularly is a great way to prevent clogged pipes and bacteria breeding. It can be cleaned with a certain amount of detergent and water. It is also possible to purchase equipment specially designed for pipe cleaning.

2.Replace the sewer in a timely manner.

If the sewer is aging or has design problems, it needs to be replaced. A professional plumbing repair company can be contacted for a replacement.

3.Increase sewer capacity.

If the sewer capacity is insufficient, consider expanding the pipes or increasing the sewer capacity. You can consult a professional designer to design.

In short, the problem of having a sewer above the washbasin may affect our lives, but as long as we pay attention to care and maintenance, these problems can be prevented and solved. At the same time, he also recommends that everyone save water in their daily lives and reduce sewage discharge, so as to protect the environment and health.

That's not easy, dig a hole in the place where the wall is grounded, and go down the slope, dig a pit directly in the sewer, build it with bricks and cement, and flow it out to the wasteland or a large puddle that can connect to the river. The internal toilet can be decorated according to the commercial house.

Because it is a rural house, the requirements for the appearance are not too high, and it can be achieved on the side or back of the house through the external drainage pipe and ground elevation.

First of all, by connecting the 75mm diameter drainage pipe, lay the drainage pipe on the outer wall, then lay the drainage pipe on the ground, and then raise the ground in the bathroom or make a method similar to the ground step beam, close the drainage pipe, and then make the drainage outlet from the side. There is also a way to make the washbasin into a wall row, the outside drainage pipe is still the same laying, when the outer wall penetrates into the inner wall, make a 45-degree oblique inclined pipe, make the drainage outlet of the washbasin, so that there is no need to raise to do the washbasin drainage, but because the shower room needs to be drained, the shower room is raised independently, so that there is no need to raise the whole.

It is recommended to do a good job of repairing and waterproofing the exterior wall, and consider the building structure, and do not demolish it without permission, which will affect the use of the building.

Summary. Hello dear <>

The bathroom is dry and wet separation, and the washbasin is the washbasin as soon as the door is opened outside, and the opaque partition is installed in the middle, and the inside is the bath and toilet, so the decoration is good. Generally, the washbasin is placed outside, and the bathroom is separated from wet and dry, and if there is space inside, a glass partition can be made, mainly as a shower area, in order to prevent the toilet from getting wet. The advantage of glass partition is that it is light transmitted, bright, and the bathroom looks more beautiful.

The disadvantage is that it is not easy to take care of, and it needs to be scrubbed after every bath, otherwise it will be very dirty. It is recommended to apply frosted tape to the lower part of the side of the glass partition shower area, which is more dirty. Or make frosted glass, translucent glass.

Clear glass is easy to get dirty. If you need sound insulation, or complete partitioning, do a three-separate bathroom, you can do it, use glass bricks or light walls for partitioning. Usually a simple measure to keep the water is sufficient.

I wish you a happy life! Hope mine is helpful to you ha.

The bathroom is dry and wet separation, the washbasin is open on the outside, and the opaque partition is installed in the middle, and the inside is a bath and toilet, so is it good to decorate.

Hello dear <>

The bathroom is dry and wet separation, and the washbasin is the washbasin as soon as the door is opened outside, and the opaque partition is installed in the middle, and the inside is the bath and toilet, so the decoration is good. Generally, the washbasin is placed outside, and the bathroom is separated from wet and dry, and if there is space inside, a glass partition can be made, mainly as a shower area, in order to prevent the toilet from getting wet. The advantage of glass partition is that it is light transmitted, bright, and the bathroom looks more beautiful.

The disadvantage is that it is not easy to take care of, and it needs to be scrubbed after every bath, otherwise it will be very dirty. It is recommended to apply frosted tape to the lower part of the side of the glass partition shower area, which is more dirty. Or make frosted glass, translucent glass.

Clear glass is easy to get dirty. If you need sound insulation, or complete partitioning, do a three-separate bathroom, you can do it, use glass bricks or light walls for partitioning. Usually, filial piety is to do simple measures to block water.

I wish you a happy life! I hope I'm helpful to you.

Does this design have an impact on Feng Shui?

There is no kiss. It will not affect Feng Shui.