How do I remove a water pipe? How to disassemble the water purifier pipe

Turn off the total water switch and disassemble it with a tool.

First, cut the pipe along the pipe with a hand saw, and then measure the length of the pipe with a tape measure and remember the size. Prepare a screwdriver and vise, and remove the place where it connects to the faucet. Then loosen the pipe wrench, or heat the thread, burn it with a lighter for a while, and then cooperate with the pliers to disassemble the pipe.

When it comes to changing the location of the toilet, we know that the best way to do this is to punch holes directly in the floor and reconnect the drain from downstairs. Because in this way, there will be no hidden danger of blockage, and it will not affect the ground height. Of course, the premise of this is that the downstairs neighbor has not been renovated, or the ceiling of the bathroom has not been installed, and the second is to get the consent of the downstairs neighbor.

After all, not all neighbors will agree to such a makeover.

For example, when my house was being renovated, the upstairs neighbor also asked for a perforated toilet bowl. Of course, I agreed. Because I also had to change the location of the toilet in my own house, I agreed to let the upstairs be renovated considering the actual situation, but in the end, after a series of incidents, I wanted to remove the pipe.

The reason is very simple, it may be that after the renovation of the pipes upstairs, the waterproofing was not done, resulting in an obvious water stain on the top of the sewer pipe. And the consequences of this situation are well known to anyone. So I contacted my neighbor as soon as possible, hoping that he would come over and deal with it.

Otherwise, there will definitely be no way to continue the construction of the bathroom decoration at home.

But what I didn't expect was that because the upstairs neighbor hadn't really started the renovation yet, he directly refused to come over, and also said that when he renovated the toilet pipe, the waterproofing had been done. Therefore, the water stains around the sewer pipe should be caused during the renovation process, not seepage down. Another is that his house has not been renovated yet, so it is impossible for water to seep down.

It's still hard for me to accept my neighbor's reply. Because my idea is very simple, whether this water stain is caused by water seepage, the neighbors should come to see it, or confirm it. Instead of ignoring nothing, it is directly concluded that there is no water seepage.

Therefore, considering the construction situation at home, in the end, in the end, I directly asked the master to dismantle the sewer pipe, and then prepared to completely seal the sewer pipe.

Of course, before I decided to do this, I also notified my upstairs neighbor, after all, I agreed to him to renovate, which was itself to make it convenient for him, and now the problem of his house must not have an impact on the construction of my house. Maybe there is a little bit of reality in doing this, but there is really no way at all.

Qijia Youyou said: In fact, judging from the above situation, I also think that it is caused by the failure to do a good job of waterproofing. Because of the water seepage during construction and water seepage after completion, the two situations are definitely different.

So no matter what, the neighbors should come and have a look, not ignore it. Of course, although the owner's approach is a little inappropriate, it is true that as he said, if the water seepage problem is not solved, the subsequent construction will definitely not be able to continue the construction. What do you think about this?

What would you do if you were in the same situation?

How to disassemble the water purifier pipe1. First of all, turn off the water inlet valve, and you can see that there is a semicircular buckle and plastic ring on the water pipe joint.

2. Then remove the blue buckle, pay attention to the seam in the buckle position, grab the joint with your hand, and press the buckle with your thumb.

3. Finally, press and hold the plastic ring, and pull the pipe from the reverse, but the strength should be controlled when dismantling, and the water pipe will be easily pulled out by brute force.

What to pay attention to when installing a water purifier:1. The installation location is usually installed near the waterproof source or sewage pipe, and in the kitchen, it can be installed under the sink, which is beautiful and does not take up space.

2. Reserve the power socket, and reserve the socket under the sink during decoration to facilitate later installation.

3. The water purifier should not be close to the heating source, nor should it be exposed to the sun for a long time, otherwise it will be deformed by heating.

Hello, dear, the sewer elbow disassembly method is: 1. Rotate the cover to wring it out. Find a square metal object and insert it inside, rotate it, you can use an iron rod (or a larger screwdriver) that can reach into the manhole cover hole, stick into the hole to "don't", and then pull it up.

2. After the cover and the edge of the lid are seamed, then stuff in something to cushion it, and when you can reach out, lift it up and open it with your hand. Attention to empty trousers: The manhole cover is very heavy, and you must pay attention to the safety of your friends when operating.

Hello dear, 1. First close the main water inlet valve at home, and then turn on the faucet to let the residual water run dry to ensure that it is clean and free of miscellaneous objects, which will ensure that there is no leakage after installation. 2. Find the joint of the hose with the help of a wrench, and remove the joint of the hose connecting the hose to the water pipe and the faucet with a grinder. To be on the safe side, it's a good idea to replace the fittings all together and install the new hose you bought on the pipes and faucets, taking care to install the gasket.

3. After all the installation is completed, press the sewer seal, unscrew the water pipe to collect water, and then press the sewer again to seal and release the water, the use is normal, and all the pipes are sealed intact without leakage.

In conclusion, removing a water pipe requires paying attention to safety, turning off the water source, emptying the pipe, using the right tools, and doing it in the right order. Only by messing up this can we ensure the safety of disassembling the water pipes and allow us to better repair or replace them.

Precautions for disassembling water pipes: pure auspicious file.

Water pipes play a very important role in our daily lives, but sometimes we need to disassemble them to repair or replace them. So, what are the steps and precautions for removing water pipes? Let's take a look at it.

Disassembling water pipes requires safety precautions, wearing protective gear during operation, and staying awake. At the same time, it is also necessary to pay attention to avoid dangerous items such as wires to avoid accidents.

2.Turn off water sources.

1.Stay safe.

4.Dismantle the water pipes.

The dismantling of the water pipe needs to be carried out in a certain order, first remove the connector, and then remove the water pipe. In the process of disassembling water pipes, such as stoves, it is necessary to pay attention to the disassembly order to avoid unnecessary trouble.

After dismantling the pipes, they need to be cleaned and inspected. The inside of the water pipe can be cleaned with a detergent or brush to remove dirt and debris. At the same time, it is also necessary to check whether the water pipes are damaged or aged, and replace them in time if necessary.

1.Stay safe.

1.Turn off water sources.

The interface of the washing machine's water inlet pipe is disassembled** as follows:

Tools: Siemens WS10M3MOTI, Torx screwdriver.

1. Disassemble the water pipe connector connected to the laundry bucket. Look down at the plumbing nut and pinch it with your right hand and twist it in a counterclockwise direction.

2. After several consecutive turns, you can unscrew the nut at the joint to expose the filter screen.

3. Disassemble the water pipe joint connected to the water pipe. Using a Torx screwdriver, loosen the two small adjacent screws in a counterclockwise direction.

4. Gently pull down to remove the nut. In this way, both ends of the washing machine hose are removed.

Precautions for the use of washing machines

1. The temperature should not be too high.

The temperature of the washing water should not be too high, generally 40 is appropriate, and should not exceed 60 (the barrel high-temperature disinfection washing machine is rotten except for Lingkai), so as not to burn the laundry bucket or form plastic aging.

2. Wash separately.

Wash separately, choose fast and slow, and adjust the temperature. Clothes of different fabrics have different washing times, so they will be washed separately to take what they need, so as to reduce unnecessary costs. Clothes of different colors are not only washed cleanly, but also washed quickly, and can be shrunk between 1 and 3 than mixed in common washing; Chemical fiber and silk fabrics with the same usual thin and soft texture can be washed in four or five minutes, while cotton and woolen fabrics with thicker texture can be washed in ten minutes.

Thick and thin do not wash, than mixed in the washing can effectively shrink the running room of the washing machine.

Sewerage is an important facility that sends sewage collected from residential areas, roads, commercial areas, industrial areas, etc. to sewage treatment plants for treatment, thus ensuring the hygiene and health of the urban environment. The sewer pipes that carry the sewage are also a key component. In the process of building a city, in order to facilitate the repair and replacement of pipes in the later stage, pipelines are usually laid underground, which makes the repair and replacement of sewer pipes relatively difficult.

Therefore, mastering the method of disassembling sewer pipes is a skill that must be understood.

1.Determine the scope of disassembly: Before dismantling the sewer pipe, you first need to determine the scope of the pipeline to be dismantled. According to the actual situation, the location and scope of disassembly need to be selected and marked to ensure that the scope of disassembly is accurate.

2.Cut off the water source: Before dismantling the pipeline, it is necessary to cut off the water source of the pipe network distributed by the pipeline to avoid water loss control during the dismantling process and affect the sanitation of the surrounding environment.

3.Emptying the sewage: The residual effluent in this pipe needs to be emptied before it can be dismantled. Typically, a portable pump can be utilized to empty the pipes.

4.Loosen the set screws: Through the tool, loosen the set screws one by one, remove the upper and lower flanges of the pipe, and make sure that the connecting part of the pipe has been completely loosened.

5.Remove the connecting part: After loosening the fixing screws connecting the pipe, you need to remove the flange of the connecting pipe to separate the pipe. In the process of unloading the pipeline, it is important to take care to prevent the pipe from breaking, which can lead to damage to the pipeline.

7.Install new pipes: After confirming that the removed pipes have been adequately cleaned and repaired, you can install new pipes again and connect them to ensure that the entire sewer line is unobstructed.

In general, the dismantling of sewer pipes is a complex task that requires the operation of professionals. If your sewer pipes need to be dismantled, it is recommended that you seek professional help to ensure the safety and accuracy of the entire dismantling process.