What does the red and white crossroads mean on the highway

Red and white crossroads on motorways are often referred to as "highway red pavement markings".

The meaning of the red pavement markings on the highway is:

1.White diagonal lines on red pavement: Indicates areas of high embankments where access to the highway is prohibited.

2.White zebra crossing on a red pavement: indicates that social vehicles are not allowed to enter the highway.

3.A white dotted line on the red pavement indicates a temporary section of the highway that is prohibited from entering.

4.A white diagonal line is drawn across the entire road surface: This indicates that the vehicle must go around the section.

It is important to note that different areas may have different signs and markings, so you should pay special attention when driving to make sure you follow the traffic rules and stay safe.

The white ridge line on the highway is the longitudinal deceleration mark of the driving lane.

There are often white diamond-shaped dotted lines on highways, which are the longitudinal deceleration markings of the driving lane, mainly through the visual narrowing of the lane to form a sense of oppression, so that the driver can automatically slow down at the position where curves and ramps are needed. If the deceleration mark is a solid line, it is not possible to change lanes, otherwise it will not only violate the rules, but also easily cause traffic accidents.

Other unique markings for high speeds.

1. Deceleration marking.

There are often white diamond-shaped dotted lines on highways, which are the longitudinal deceleration markings of the driving lane, mainly through the visual narrowing of the lane to form a sense of oppression, so that the driver can automatically slow down at the position where curves and ramps are needed. If the deceleration mark is a solid line, it is not possible to change lanes, otherwise it will not only violate the rules, but also easily cause traffic accidents.

2. Diversion marking.

The form of the high-speed diversion line is mainly one or several white V-shaped lines or diagonal lines set up according to the topography of the intersection, and the vehicle must drive according to the specified route, and shall not press the line or cross the line. But many drivers do not know the role of diversion markings, often stop in this area to set up navigation, reversing, etc., caught by the traffic police will be deducted 3 points, a fine of 200 yuan.

3. Convex ** marking.

It's something like this"Zebra crossing"The convex ** marking, there will be multiple sections of the marking line in a row, and the wheel will continue to vibrate and make a friction sound after rolling, so that the driver wakes up, adjusts the direction, and avoids the occurrence of accidents. The main function is to remind the driver that there is a turning downhill section ahead, and pay attention to slow down.

1. Oscillation marking

The oscillation marking, also known as the lead noise marking, is mainly used to remind the driver to drive according to the lane, slow down, and avoid fatigue driving. Because these markings are concave and convex, when the car passes through these markings, there will be a "boom" sound, which has a very good warning and reminder effect on the driver.

Second, the diversion line

The highway diversion line is a white V-shaped or oblique line area set up according to the topography of the intersection, which is mainly used to divide the traffic flow, and prompts the driver to bypass the diversion line according to the prescribed route, and is not allowed to press the line or cross the line in the area, and it is not allowed to stop in the diversion line area.

3. Vehicle distance confirmation line

This kind of marking can often be encountered on the highway, the main function is to remind the driver and the car in front to ensure that the distance between the car is more than 200 meters (500 meters in bad weather), it has two shapes, a white rectangular distance confirmation line, and a white polygonal confirmation line, usually set up in the highway accident-prone or other necessary road sections.

Fourth, deceleration marking

The deceleration marking is usually set in the toll station square, the exit ramp, and other road sections that require vehicles to slow down, and is a white dotted line, with a single dashed line, a double dashed line and a triple dashed line in the form, and is set perpendicular to the direction of travel.

The main function of the deceleration markings is that when the vehicle passes through the section of the road longitudinal deceleration markings, the driver's subjective vision will feel that the lane is gradually narrowing, and the dust will be raised to wake them up to improve their attention, and they can take the initiative to take deceleration measures, which can effectively prevent the motor vehicle driver from taking sudden braking before approaching the stop line.

Fifth, the visual marking of the error

As a special section of the highway, the difference between the brightness of the inside and outside the tunnel objectively exists, and the vehicle will produce a "black hole" phenomenon after entering the tunnel. The special deceleration marking, called "trompe l'oeil marking", is generally set in the area of 200m outside the tunnel to 100m in the tunnel, the main function is to let the driver have a feeling of space compression, and look at the lane along the direction of driving to show the trompe l'oeil effect of narrowing and concave road, prompting the driver to slow down in advance before entering the tunnel, and play a certain role in safety precautions.

Legal Analysis: Charges. The red parking spaces represent the first class of road sections, the green ones represent the second class of road sections, and the white ones represent the three types of road sections.

Public parking spaces for unified planning, with red, green, white three colors to distinguish, the second ring parking space will be divided into red, between the second ring and the third ring is green, outside the third ring or keep the original white unchanged, the entire planning project is planned to be completed in October this year, the parking spaces in different areas are divided into different colors to allow the public to clarify the division of the urban area, in addition to the need to enhance the image of the city. 3 yuan parking hours in the first 2 hours in the first 2 hours in the first-class area, 4 yuan in the parking space hour after 2 hours, 3 yuan in the first 2 hours in the second-class area, 3 yuan in the parking space hour after 2 hours, and 2 yuan in the third-class area when the parking space is in a small bend.

Legal basisCivil Code of the People's Republic of China

Article 274: The ownership of roads, green spaces, etc., within building zoning, and roads within building zoning belong to the owners in common, except for urban public roads. The green space in the building zoning belongs to the owners in common, except for the urban public green cracked land or the express ownership of individuals. Other public places, public facilities and property service rooms within the building zoning belong to the owners in common.

Article 275: The ownership of parking spaces and garages, and the ownership of parking spaces and garages planned for parking cars in building zoning, is to be agreed upon by the parties through means such as **, gifts, or leases. Parking spaces that occupy roads or other sites jointly owned by the owners for parking cars belong to the owners in common.