What is the difference between a single yellow line and a double yellow line in the middle of the ro

With the improvement of people's living standards, cars have naturally entered ordinary families, and cars have become an important means of travel for many people. A car is a very important thing in life, but friends only know that after buying a car, they use a lot of annoying things, the first is the cost of car maintenance, the second is the high price of oil, and the ubiquitous electronic eye is on the road, and you will be fined if you are not careful. In their opinion, most of the points are deducted by fines.

After all, for a lot of people, it is difficult to avoid being fined when driving only on the highway.

When studying in driving school, we all know that all kinds of indication lines on the highway are to standardize the driving route of the car, but many people are not very clear about some of the indication lines on the highway, in fact, the lines on the highway are more complicated, and it is normal for many car owners to remember wrong. Pay attention to this when yellow lines appear on highways. Generally in the middle of the highway, there is a double yellow solid line on the highway.

The function is to distinguish the two directions, so that the vehicle can neither press the line, nor turn and cross the line. Among them, the single yellow line is divided into the difference between the solid line and the dotted line. In the middle of the highway, the single yellow line is a two-lane road, and the double yellow line cannot be pressed according to the line, which is the most basic common sense.

If there is a single yellow dotted line in the middle of the road, then this section of the road is generally a one-way street, so the owner should not go wrong, and entering the one-way line will deduct points and fines. Single yellow line and double yellow line have different uses, the role of the yellow solid line is to distinguish lanes in different directions, and in the case of solid line overtaking, the vehicle can not press the solid line, can not turn, otherwise it is necessary to deduct a fine. At the same time, the double yellow line is divided into two solid lines, solid line and dotted line.

When driving, there is only one yellow line on the road, and the dotted line can be threaded.

When we drive, the double yellow line is a dotted line and a solid line, and the vehicles on one side of the dashed line can press the line, change lanes, turn, overtake, and can switch to the front in the other direction. Vehicles on the solid line side still cannot press the line and must drive within the yellow line, which I hope you will remember. In fact, as long as you keep this in mind, whether it is a white line or a yellow line, as long as it is a solid line, you can't cross the line according to the line, if it is a dotted line, you can turn and change lanes under the premise of ensuring safety.

The main difference between the two is that the single yellow line is generally used on roads with less than 4 lanes in both directions (including bicycle lanes), while the double yellow line is generally used on wider roads. According to the relevant provisions of the "Road Traffic Sign Marking": it is forbidden to cross the dividing line of the opposite roadway (also known as the prohibition of crossing the center line of the road) There are three types: double yellow solid line, yellow dotted solid line and single yellow solid line, which are used to separate the traffic flow in the opposite direction, and prohibit vehicles in both directions or one direction from crossing the line or pressing the line.

When the train generally exists on a relatively narrow road, the two-lane road will use a single ring line to distinguish the direction of travel on both sides, mainly divided into a single yellow solid line and a single yellow dotted line, if it is a solid line is generally forbidden to cross, if it is a dotted line can be crossed, the life line mainly exists in some wider roads, such as the city's main road or some roads with more than 4 lanes of double yellow line, the main role is to distinguish the direction of the vehicle, the double yellow line is divided into two kinds of double yellow solid line and a solid line and a dotted line.

The single yellow line generally appears on the relatively narrow road, the purpose is to divide the road into two lanes, the double solid line generally appears in the road used to divide the upward and downward directions with two or more motor lanes, but there is no road with a middle divider, the two-lane road will use the single reed direction to divide, and the main road of the city and the road with more than four lanes will use the double yellow line to divide, which is the difference between the two.

1. What is the difference between a single yellow line and a double yellow line?

1. What is the difference between a single yellow line and a double yellow line?

1) The main difference between them is that the single yellow line is generally used in a two-way single lane, while the double yellow line is generally used in a two-way multi-lane, and the road using the double yellow line is generally wider;

2) We must pay attention when driving, if we encounter a single or double yellow solid line, do not let the vehicle press the line, cross the line or make a U-turn in this place, only the solid line becomes a dotted line can be turned around;

3) However, sometimes there will be a situation where only one line in the double yellow line is a dotted line, in this case, only the vehicle on the side of the double yellow line can turn around, and the side of the solid line is not.

2. Legal basis: Article 3 of the Road Traffic Safety Law of the People's Republic of China.

Road traffic safety work shall follow the principles of managing according to law and facilitating the masses to ensure that road traffic is orderly, safe, and smooth.

Second, can the double yellow line dotted line turn around?

Yes, the yellow double solid line in the center means that the vehicle is not allowed to overtake or roll over the line, and at the yellow double dotted line, you can make a U-turn or make a left turn. Make a U-turn at the solid line of the double yellow line, and in accordance with the relevant regulations, a fine of 100 yuan will be imposed and 3 points will be deducted.

On roads without central isolation facilities or without center lines, motor vehicles shall comply with the following provisions when encountering vehicles coming from opposite directions:

1. Slow down and drive on the right, and keep the necessary safety distance from other vehicles and pedestrians;

2. In the road section with obstacles, the barrier-free party goes first. However, when the obstacle has entered the obstacle section and the barrier-free party has not entered, the obstacle shall go first;

3. On narrow slopes, the uphill side goes first. However, when the downhill side has reached the middle of the slope and the uphill side has not gone uphill, the downhill side goes first;

4. On narrow mountain roads, the side that does not rely on the mountain goes first;

5. At night, the car should be changed to low beam 150 meters away from the opposite direction, and the low beam should be used when meeting on narrow roads, narrow bridges and non-motorized vehicles.

The yellow line is used as the central lane divider, which is used to distinguish between up and down, and can temporarily overtake the borrowed road during driving; The double girder rental grinding yellow line should be regarded as a wall and it is absolutely forbidden to surpass it. Double yellow lines are drawn for two-way four-lane or more, and single yellow lines are drawn for the following and double yellow lines can be temporarily turned around, but single yellow lines are not!

Yellow double solid line in the center: It means that it is strictly forbidden for vehicles to cross the line to overtake or press the line, and it is used to divide the road with two or more motor lanes in the upward and downward directions, and there is no ** divider.

Center single solid line: means that vehicles are not allowed to cross overtaking or cross the line, and is used to divide the road with only one lane or one motorized lane and one non-motorized lane in one direction.

This means that it is strictly forbidden for vehicles to cross the line to overtake or drive on the line. The double yellow solid line is used to divide the road with two or more motor lanes in the upward and downward directions, and there is no ** separation zone.

China's relevant laws and regulations have very clear provisions: it is forbidden to cross the dividing line of the opposite roadway (also known as the prohibition of crossing the center line of the road) There are three types: yellow dotted solid line, double yellow solid line and single yellow solid line, which are mainly used to separate the traffic in the opposite direction, so that people can drive more safely, and it is forbidden to drive in both directions or in one direction for vehicles to cross the line or press the line.

1. The yellow line is used to distinguish lanes in different directions, generally drawn in the middle of the road, like a separation belt, separating the road into two directions: Whether it is a single yellow line or a double yellow line, as long as it is a solid line, it is strictly forbidden to cross, such as overtaking, turning, U-turning, etc. You should not cross the line unless you are driving.

2. Regardless of the single yellow line or the double yellow line, as long as it is a dotted line, you can overtake or make a U-turn under the condition of ensuring safety. The single yellow line is generally used on roads with less than 4 lanes in both directions (including bicycle lanes), and the double yellow line is generally used on wider roads.

3. If there are double yellow lines, one is a solid line and the other is a dotted line, which side of the dotted line is, the vehicles on that side can be temporarily crossed from there, such as overtaking or turning.

4. The yellow single solid line in the center (commonly known as the "single yellow line") also means that vehicles are not allowed to overtake or press the line to drive. Roads with only one or two lanes (one motorized lane and one non-motorized lane) on each side, or three-lane roads with two-way traffic, and other sections of the road where overtaking is prohibited due to the possibility of a collision, should be painted with a single solid line in the center.

There is no difference between a single yellow line and a double yellow line.

In the case of the yellow line, it divides the opposite lane, and the vehicles on both sides of the line travel in opposite directions. Nowadays, double solid lines are generally set in the middle of the road to separate lanes.

In the case of the double yellow line, sometimes there will be a situation where one side is a solid line and one side is a dotted line, in this case, when the vehicle is on the side of the dotted line, the vehicle can make a U-turn, but if the vehicle is accompanied by God on the side of the solid line, it cannot make a U-turn. The single yellow solid line is also strictly forbidden to cross, such as overtaking, turning, U-turning, etc. If it is a yellow dotted line, it means that under the premise of a safe environment, it can temporarily run over the turn or overtake.

Introduction to the types of road markings:

1. When the white dotted line is drawn in the road section, it is used to separate the traffic flow in the same direction or as a driving safety distance identification line; When drawn at intersections, it is used to guide vehicles.

2. When the solid white line is drawn in the road section, it is used to separate motor vehicles and non-motor vehicles traveling in the same direction, or to indicate the edge of the roadway; When drawn at an intersection, it can be used as a guide lane line or stop line.

3. When the yellow dotted line is drawn in the road section, it is used to separate the traffic flow in the opposite direction; When painted on the side of the road or on a kerb, it is used to prohibit vehicles from parking on the side of the road for a long time.

4. When the solid yellow line is drawn in the road section, it is used to separate the traffic flow in the opposite direction; When painted on the side of the road or on a kerb, it is used to prohibit vehicles from parking on the side of the road for a long time or temporarily.

5. When the double white dotted line is drawn at the intersection, it is used as a deceleration yielding line; When drawn in the middle of a road section, it is used as a variable lane line that changes the direction of travel over time.

6. When the double yellow solid line is drawn in the road section, it is used to separate the traffic flow in the opposite direction.

7. When the yellow dotted solid line is drawn in the road section, it is used to separate the traffic flow of the opposite direction; The side of the solid yellow line prohibits vehicles from overtaking, crossing or turning, and the side of the yellow dotted line allows vehicles to overtake, cross or turn around while ensuring safety.