Where do I need to install more sockets? What are the sockets that need to be installed

Updated on home 2024-07-13
20 answers
  1. Anonymous users2024-02-12

    Bedroom: Five-pin sockets need to be installed on both sides of the bed, generally need to be charged with mobile phones, laptop adapters, desk lamps, etc.;

    The position of the TV needs to be installed with a few more five holes, because in addition to the TV there is also a set-top box, it is also possible to use this link TV screen to watch movies, and you have to think about whether you are ready to use the TV cabinet, if you use it, the socket can not be installed too low, blocked by the TV cabinet.

    In addition to these two places, it is recommended to install another five-hole, such as my two mobile phones, two notebooks, and other ones that need to be charged, sometimes the socket is not enough.

    Living room: On the edge of the sofa, the TV background should be equipped with more sockets, and the TV background in the living room should be installed with at least 4-5 five-holes, my router, TV, power amplifier, and set-top box are all here, and sometimes I have to plug in an adapter for a notebook. Although it is equipped with five holes, many electrical sockets are now "large", and three holes may not be used for two holes.

    Kitchen: Think about the location of the sockets for rice cookers, microwaves, refrigerators, hoods, electric kettles, etc.

    Bathroom: If you want to install a washlet, install a socket next to the toilet.

  2. Anonymous users2024-02-11

    No matter how many holes, you must connect the fire number of the power cord to the L connector of the socket, the neutral wire to the N connector, if there is a ground wire, connect to the E interface of the socket.

    You can't see the letter mark of the socket clearly in the picture, so mark the connection method according to the power cord you are connected to now (the black mark is the ground wire connection method).

    Caution in selection. 1.The power socket shall be made of products that have been inspected and qualified by the relevant national product quality supervision departments;

    2.Safety sockets should be used for power sockets in residential buildings, and splash-proof sockets should be used for wet places such as toilets;

    3.The rated current of the electrical outlet shall be greater than a multiple of the rated current of the equipment known to be used. Generally, the rated current of single-phase power socket is 10A, and the special power socket is 16A.

    4.In order to facilitate plugging, the number of combined sockets should be two, and the maximum (including switches) should not exceed three;

    5.For household appliances that are plugged in and there is a risk of electric shock, an outlet with a switch to disconnect the power supply should be used;

    6.In a relatively delicate and humid place, a waterproof box should be installed at the same time as the installation of the socket.

    The above content reference: Encyclopedia - socket.

  3. Anonymous users2024-02-10

    I think your wiring method is right, the insulating skin should be cut off at the folded place is stuffed into the wiring hole, and the screws must be tightened to prevent the screws from loosening and causing poor contact, so that the socket is overheated and prone to failure. If the electrical power of the socket is large, it is best to use square copper wires.

  4. Anonymous users2024-02-09

    Your drawing is good, completely correct, just like that, there is nothing wrong with the connection, and ensure that each contact stud must be tightened to avoid ablation caused by poor contact.

  5. Anonymous users2024-02-08

    Of course that's right, there's nothing wrong with that. Put the wire folded in half into the terminal hole, tighten the screw, and press it tightly.

  6. Anonymous users2024-02-07

    <><What are the sockets that need to be installed1.Leave 2 at the bottom of the blank wall of the balcony.

    If you have a cat in the later stage, you can supply power to the cat's automatic feeding machine and circulating drinking machine.

    2.Leave 1 in the mirror cabinet.

    You can charge your toothbrush, irrigator, electric shaver, etc. in the mirror cabinet.

    3.Leave 1 in the housekeeping cabinet.

    You can leave one for a cleaning tool with a battery, such as an electric vacuum cleaner.

    4.Leave 2 on the leisure bay window.

    In the future, you can charge on the leisure bay window or use a laptop to work, and it will be much more convenient to have a power supply.

    5.Leave 1 next to the toilet in the wet area.

    Whether it is to replace the smart toilet in the later stage or install the smart toilet with a positive lid, or to charge it when going to the toilet, it will be much more convenient, but one.

    Be sure to use an outlet with a splash box.

    6.Leave 1 above the kitchen wall.

    Install gas alarms to ensure the safety of household gas use.

    7.Leave 1 in the weak current box.

    Vulnerable devices such as optical modems, routers, and switches all need to be powered by power, and only the cable head can be directly connected to the plug bar.

    8.Leave 2 under the hallway.

    It can be equipped with a sensor night light to facilitate the elderly to get up and go to the toilet at night.

    9.Leave 1 under the shoe cabinet at the door.

    Whether it is to install the shoe cabinet light strip, or to use the shoe dryer and smart shoe cabinet in the later stage, it is very convenient.

    10.Leave 2 blank walls.

    In the future, the blank wall will definitely be used, whether it is a table or a home appliance, a power socket is required.

    11.Leave 1 above the dresser.

    Girls' curling irons, beauty devices, and massagers all need to be plugged in, preferably with switches.

    12.Leave 1 on the side of the bed or at the end of the bed.

    Some people are not used to air conditioning, and in summer they can use it to plug in a floor fan or an electric mosquito repellent.

  7. Anonymous users2024-02-06

    Sockets should not only be installed according to the function of the room at home, electricity safety, convenience and other aspects, only in this way can the socket be safe and practical.

    People will pay great attention to the installation of sockets when decorating the house, thinking that the more sockets, the better, in fact, the installation of sockets in the home decoration should not only be more, but also according to the multiple aspects of the home to specific installation, only in this way can the safety of the use of the socket be ensured so that the installed socket has a good practical value.

    First, the installation of sockets should be based on the function of the room

    When installing the socket, it must be installed in accordance with the function of the room, if the socket is installed in the study, the socket should be placed on the side of the wall corresponding to the bookcase, there must be at least two combination gaps, because the air conditioner should be installed in the middle of the study, and the computer and the lamp should be installed. When installing sockets in the kitchen, it is necessary to consider the placement of household appliances and the disinfection of range hoods, or microwave ovens, water heaters, rice cookers, etc.

    Second, pay attention to the safety of installing sockets and electricity

    When installing the socket at home, it is necessary to determine the installation location according to its safety, when installing, it is best to choose a safe socket with a fuse, and when wiring, it is necessary to comply with the principle of the front-line switch zero line into the lamp head, and the leakage safety protection device should be set up on the installed socket, and at the same time, different sockets should be installed for different electrical appliances to avoid multiple electrical appliances using a socket at the same time, resulting in overload of electrical appliances and fire. Kitchen and bathroom sockets should also have splash boxes or plastic baffles to prevent them from getting wet during use.

    Third, the installation of sockets should pay attention to the convenience of use

    People install plug-ins indoors for the convenience of use, so when installing, we must consider its convenience, because most electrical appliances in the family now need electricity, and some electrical appliances will also consume electricity in the standby state, so when installing the socket, they should prepare independent sockets, which can avoid frequent plugging and unplugging, and can also prevent them from consuming too much power in the standby state, in addition, electric water heaters, range hoods and air conditioners and refrigerators must have independent sockets, It is best to have a safe grounding wire, which is not only convenient to use, but also to ensure the safety of electricity.

  8. Anonymous users2024-02-05

    Parents must set a good example in front of their children, because some children also like to watch TV when they are young, which is very harmful to their children's eyes, and parents must know what kind of way to make up for their children's needs. Many parents will feel that their children are always disobedient when they are young, and there is no way for their children to educate, so they must choose some safe areas in the process of decoration, because you will have a lot of troublesome things when installing sockets, which will make you feel very inconvenient.

  9. Anonymous users2024-02-04

    There should not only be many sockets, but also according to the daily habits of the home, the electricity needs of the residents, and the style of home decoration. The installation of sockets should pay attention to the living room part, and the household appliances in the living room are used intensively, so it is recommended to reserve more sockets in this space. There is also the bedroom part, the socket in the bedroom, although there are fewer electrical appliances in the bedroom, but the socket can not be installed, first of all, there is a socket on each side of the bed, which is convenient for charging with desk lamps and mobile phones.

  10. Anonymous users2024-02-03

    It should be arranged according to the design of the home, and the location of various household appliances should be planned before changing the water and electricity, and there are a few more to prepare in case of emergency, and it should be installed according to the layout of the home, otherwise it will affect the appearance, and pay attention to safety, height, and avoid danger.

  11. Anonymous users2024-02-02

    It can be installed according to the needs of the home, according to the decoration method of the home, can be installed according to the style of the home, can be installed according to the residence of the home, can be installed according to the layout of the home, and can also be installed according to the needs of the electrical appliances at home, these are all problems that need to be taken into account when installing the socket.

  12. Anonymous users2024-02-01

    It should also be installed according to the practicality of the home, leave more in the kitchen and bathroom, do not leave the aisle, do not plug in the ground, because it is inconvenient, and it is easy to have leakage accidents.

  13. Anonymous users2024-01-31

    There are advantages and disadvantages of the two connection methods, there are many contacts on the line of the method in Figure 1, it is not easy to maintain, each socket is relatively independent, and the branch line fault has little impact on other branch lines.

    Figure 2 is a more formal wiring method, its joints are in the box of each socket, easy to check and maintain, the only bad is that the sockets are connected to each other, one of them fails, then the sockets in the future have an impact.

    I recommend the two-way connection method to facilitate future maintenance and maintenance. The method in Figure 1 is basically disposable, and it is almost impossible to repair later.

  14. Anonymous users2024-01-30

    Actually, the principle is the same. Figure 1 has a disadvantage, there are three terminal points, and the potential connector is loose and causes heat. Figure 2 also has a disadvantage, that is, the wire should be used more, and the advantage is that there is no connector and does not cause heat.

    I'm biased towards Figure 2. Hope it helps. Do not cut the wire when connecting to the socket, directly break the skin, if the socket is broken, it will not affect the use of other sockets.

  15. Anonymous users2024-01-29

    Like I do it, many HIFI-level equipment are imported, and the plugs are all European and American standards, so you can only buy this kind of universal socket.

  16. Anonymous users2024-01-28

    The wiring method of the socket and switch is not understood by many friends.

  17. Anonymous users2024-01-27

    The principle of Figure 1 and Figure 2 is the same. It's just that the form is a little different. It's actually the same thing.

  18. Anonymous users2024-01-26

    Figure 1 is good, Figure 2 If there is a problem, it may cause other sockets to be not good.

  19. Anonymous users2024-01-25

    Are you sure that Figure 2 is in parallel? It should be in tandem. So choose Figure 1.

  20. Anonymous users2024-01-24

    If I do it, Figure 1 is better. Figure 2 is prone to failure.

Related questions
7 answers2024-07-13

6. The concealed socket is not less than one meter from the ground, and in order to prevent children from being electrocuted, touched with fingers or inserted into the hole of the power supply with metal objects, the safety socket with the safety flap must be selected. >>>More

8 answers2024-07-13

1. The grounding place is different, some switches have grounding terminals, some switches do not, generally if you can't find it, just use the shell to ground (of course, the switch shell must be metal). >>>More

8 answers2024-07-13

I feel that the most important thing for newcomers to hone is work efficiency and work attitude. >>>More

5 answers2024-07-13

Because the monitoring system security equipment is usually installed in the outdoor open environment, it will be very susceptible to lightning strikes, which will seriously endanger the safety of the security system, so the security system must need a perfect lightning protection and surge protection program.

29 answers2024-07-13

The motherboard is very good CPU, why not use 5000+

Recommended graphics card: MSI Z3850 (670 1400, 256, 256, D3) or Onda HD3850 (670 1660, 256, 256, D3). >>>More