I got a new toilet downstairs, and every time I flush it, my whole house is like a thunderous sound?

The old toilet does not have this problem, which may indicate that the problem is that the new toilet flushes differently than before.

I have seen the toilet you said, and it does have this brand, but it should have nothing to do with Mr. L, it is drained by a large pipe, the water consumption is slightly more, and the water is very fast, and it may hit the four walls of the pipe, and the sound will be louder.

The problem is that his house is downstairs, and it seems that he can only do the main pipe of his own house if he does sound insulation. It seems unlikely that he will not use it at night, and it is unrealistic to let him change the toilet again, so he can only find a way to solve it himself. Why don't you take a look at the floor drain in your home first, is it the kind of flipper?

If it is a flap, you can replace it with a deep-water sealed floor drain, because the sound insulation effect of the deep-water sealed floor drain can be better. There is also an interface under the wash basin, which must not only have a reverse bend, but also have to be made larger and sealed better.

There is also downstairs and downstairs, it is said that their house can be heard better, and they can also communicate with him, can they try to make sound insulation for the drainage pipe of the upstairs toilet on the ceiling of their house.

It could be that the impulse is too strong, or it may be that the floor slab is too thin. Poor sound insulation.

One is to install soundproof floor tiles, or to replace a new toilet with too loud noise through communication with neighbors, but I personally feel that it is more likely to install floor tiles.

Call the police to complain, or buy a new toilet for his family, or put on earplugs, after a long time, you may get used to it.

If the communication is not good, you can negotiate with them to pay for you. Then give them a toilet similar to the **. I can't think of a better way to do it.

Toilet problem! Two solutions! 1. Communicate with each other, 2. Move!

It is recommended to record the audio and communicate upstairs to see if it is a product problem, and then it seems that there is a maintenance master who can solve this problem.

You tell the upstairs, you record it first, and then you tell him.

Summary. Hello dear, this is mostly the reason for the water pipe. The sewer is very long, there is air in it, the water flow is very fast when flushing, and when the water rubs against the air and the pipe wall, it will produce a sound, and the sound will reverberate in the pipe, and the longer the pipe, the louder the sound, so sometimes the sound will be like thunder.

Once in three or four days, there will be a particularly loud flushing of the toilet, like thunder, what is going on, how to solve it.

Hello dear, brother, this is mostly the reason for the water pipe. The sewer is very envious of the long cavity and the air in it, and the water flow is very rapid when flushing, and when the water rubs against the air and the pipe wall, it will produce a sound, and the sound will reverberate in the pipe, and the longer the pipe, the louder the sound, so sometimes the sound will be like thunder.

1. The water tank leaks and sometimes the toilet keeps ringing, which is caused by the leakage of the toilet. It is recommended to open the lid of the toilet tank, check whether the float is normal, and adjust it. If you don't have any experience, it's more reliable to find a professional to repair it.

2. The problem of the water tank button may be that the water tank button has been used for a long time, which is also the reason why it is very easy to malfunction, for example, it cannot be automatically rebounded, resulting in the toilet making a noisy sound all the time. The solution is very simple, just go to the market and buy the same button and reinstall it.

3. If the sewer pipe Xiaochun Road is outside the wall, it will make a lot of noise, in this case, it is recommended to wrap the sewer pipe with insulation materials, and then fix it with soundproof plastic; If you are concerned about aesthetics, you can use lightweight bricks with sound insulation to cover the core of the sewer pipe.

Almost all of the above causes (solutions) can be solved accordingly.

Abstract This question is up to me, it takes a little time to type, and I ask you to be patient.

After the new toilet was installed, the upstairs flushed very loudly, and it smelled when flushed. The sound came from the pipe under the toilet, and my house was at the very bottom.

This question is up to me, it takes a little time to type, so please be patient.

That's a problem with the submersible bend.

What is Sinking Bay? It has been normal before it was changed.

My family lives on the third floor, and there is a second floor above me.

Tell me what's going on?

The branch pipe has a submersible bend.

The toilet may have moved.

It has not been moved, I installed it on the spot, that is, in the original place for a new toilet I think is still a problem of submersible bend, otherwise there will be no smell, that is, this elbow loses its effect is the old one replaced with a new one, in the original position of the aperture is firmly installed, there is no sound and no smell before, and the sound of flushing is very loud when the new upstairs is installed, and there is a smell.

Uh-huh, can check it out.