What are some ways to fix sweater pilling?

1) If it is a relatively large hairball, you can cut it directly with scissors.

2) Use a hair removal comb to gently scrape the pilling area, and it is easy to clean off the small hairballs.

3) Use a hair remover to remove hairballs from sweaters and coats, which is fast and convenient. In order to protect the texture, place the sweater on a flat surface and flatten the wrinkled areas before operating.

4) Treated toothbrush. Use scissors to cut the side of the toothbrush a few times to make the side of the toothbrush uneven, and gently scrape the side of the sweater with the toothbrush to remove the hairball.

5) Gently shave the surface of the sweater a few times with a razor, and the hairballs are piled up.

6) You can also use tape or Velcro to stick a stick, choose the kind of wide edge sticky good.

7) Sponge or sandpaper for washing dishes, preferably new, relatively clean and hard, put the bump on the sweater, just slide it lightly.

To solve the pilling of sweaters: 1, try not to let the sweater rub against the bench, and at the same time, do not let the sweaters rub against each other too much, so as to avoid the seriousness of pilling.

To pill, you have to use tape to glue the extra hairballs of the sweater, these hairballs are relatively small particles, so you can still stick some with tape.

You can use a small shaving ball helper, which generally only needs to roll a few times to make the hairball easy to remove, so it is also very good to have some at home.

It is also more common to use a shaving knife to remove it, as it eliminates the need to buy some other gadgets.

Use scissors to cut the hairballs off the sweater. If there are not many hairballs on the sweater, you can cut it off with scissors so that the sweater will not be damaged.

Sweater pilling is directly related to the quality of the sweater, so we can buy some depilators to solve these problems.

If you walk together, this is very annoying, so if you say that the hair is together, you can use that shaver to shave it, and if you shave it once, it will be very frustrating in the future, and if you will get hairy in the future, it will be very rare.

There are 4 most common and effective methods for the treatment of sweater pilling: 1. Scouring pad hair ball removal method, 2. Comb hair ball removal method, 3. Shaver hair ball removal method, 4. toothbrush hair ball removal method.

1. Scouring pad hairball removal method.

Many people don't know that the white cloth is an effective means of removing the hairball on the surface of the clothing sweater, first you need to wet the white cloth with warm water, and then wring it out, and gently wipe the surface of the sweater when washing the rough side of the white cloth when washing the sweater clothes, and whether it is the hairball of the sweater clothes, or the dirt of the coat such as tweed and suede, you only need to wipe it clean.

Second, the comb to remove the hairball method.

The comb we often use can not only comb the hair, in fact, there are many other uses, such as removing the hairball on the surface of the sweater, and the finer the comb tooth distance to remove the hairball, the better the effect, as long as you use the comb to gently wipe the pilling place of the sweater, a little force can scrape off the hairball on the surface of the clothes.

3. Shaver hairball removal method.

If there are a lot of hairballs on the surface of the sweater, we can have another way, first lay the clothes flat, and then find a razor to put it close to the surface of the fluffing part, gently scrape the hairballs on the surface of the sweater, just use the strength to use light, and then slowly force, pay attention to the strength and angle of the hairball, to avoid the sweater being scratched.

Fourth, the toothbrush hairball removal method.

Many people choose to discard the toothbrush at home after it is discarded, today I will introduce to you another use of the toothbrush, first use scissors to cut a few knives on the old toothbrush, so that the toothbrush becomes uneven, and then take the cut toothbrush to cut this side, and then wipe along the sweater line, the hair ball will stick to the toothbrush, you can remove the hair ball. Therefore, don't litter discarded toothbrushes, and leave them to remove the hairballs of clothes!

1. Use scissors to cut off larger hair balls.

For some large hairballs, only a pair of scissors is needed to cut the hairballs. After cutting, take the toothbrush and scratch along the sweater lines, the hairballs will stick to the toothbrush, and the small hairballs will be gone immediately. In addition, it should be noted that when trimming the hairball, do not cut the sweater!

2. Use a dehairing brush.

Lay the sweater flat, find the place where there are hairballs, and gently scrape the hairballs in the direction of the lines, so that the hairballs will magically stick to the brush! You can do it at any time, you can also do it when you go out to travel, it's simple and convenient, and the effect of removing hairballs is also very good.

3. Use a hair remover.

The use of a hair remover is the most commonly used and the cleanest that can be removed. In addition to sweaters, such as coat knitwear, hair removers can also be used. To protect the texture, the sweater can be quickly removed by laying it flat and stretching the wrinkles.

4. Use a razor.

The razor is also a sharp tool for removing small hairballs, lay the clothes flat, and slowly scrape off the hairballs on the surface by placing the razor close to the surface. Push lightly, then apply force, concentration and angle to prevent scratching the sweater. Finally, with a steam iron, the sweater will be restored to its original beauty without damaging the cardigan at all.

01. Use a razor to gently scrape the balls on the sweater, and the surface of the sweater will be smooth after a while.

02. Use a sweater trimmer to trim the balls on the sweater, note that it must not be used on the face or armpits on the human body; In order to protect the texture, the garment is placed on a flat surface and the folds are stretched before manipulation; If you press strongly, it will damage the texture, so do not apply heavy pressure; When removing the blade, be sure to turn off the switch.

03. You can use transparent adhesive (wide adhesive good) to stick the hairball on the clothes. Sweater pilling is really a headache, and these daily ways to deal with sweater pilling can be dealt with in an emergency manner if you understand it. In addition, if you want the sweater to maintain its original beauty for a long time, you can't ignore the usual maintenance.

The way to solve the pilling of sweaters is generally to try not to let the sweater come into contact with the rough surface when wearing it, so as to minimize the chance of pilling.

1. Use a wider transparent tape to stick the hairball on the sweater. 2. When there are not many hairballs on the sweater, you can use scissors to cut them, but be careful not to cut the sweater. After cutting, use a toothbrush to scrape along the lines of the sweater.

2. When there are not many hairballs on the sweater, you can cut them with scissors, but be careful not to cut the sweater. After cutting it, use a toothbrush to scrape along the sweater lines.

3. Put the sweater flat, find the place where there are hairballs, and use the hair remover to gently scrape along the direction of the pattern. 4. Use a razor to gently scrape the hair balls on the sweater, which can make the surface of the sweater smooth. 5. Tie the new blade to the comb, with the blade side down, gently scrape along the sweater lines, or you can go to Qingzi to remove the hairball.

Two ways to minimize the prevention of pilling.

1. When washing, turn the sweater inside and out to reduce the friction on the surface of the sweater and prevent the sweater from pilling.

2. Wash the sweater with shampoo to make the sweater soft and natural.

The more commonly used method of manual hair removal.

1. The easiest way is that you can use transparent glue, and it is the kind of wide adhesive with good viscosity.

2. There are also special sweater removal pills on the market, you can buy one to use.

Analysis of the causes of fluffing and pilling of sweaters.

The mechanism of pilling is: in the process of wool yarn processing and sweater wearing, by the action of various external forces such as friction and tension, the wool fiber in the wool yarn is easy to hook out to form a ring or a single head detachment, after repeated friction, the wool fibers are entangled together to form a ball, and the size of the balling degree mainly depends on:

1.Materials used in the product.

Low-grade raw materials, short length, uneven fineness, high short hair rate, national hair, low branch hair and other raw materials belong to this list.

2.Spinning process control.

The spinning method, fiber properties and the twist of the yarn determine how much the fiber stretches out of the yarn surface.

3.Fabric construction.

Sweater products are knitted fabrics, and the density of the fabric and the tightness of the coil structure also have an impact on the pilling of the sweater, and the surface of the relatively smooth fabric, such as jersey fabrics, ribbed fabrics, has stronger anti-pilling performance than the uneven surface fabric structure such as fat flower fabric and strip fabric.

4.Washing mode and wearing.

The washing method of sweaters is sometimes an important reason for fluffing and pilling, and the products that are not marked "machine washable" must be washed in the way of "careful hand washing". In general, the elbow and rib friction pilling is more significant.

In a way, pilling is the "twin" of whole wool products