How to raise tulips in water, is it okay to raise tulips in water

Tulip flower insertion and cultivation methods: container selection, bulb treatment, water soak bulb, temperature management, seedling management, etc.

1. Container selection:

Tulips for water cultivation, you need to choose a container suitable for the growth of tulips, generally you can use a vase, or a glass bottle, to choose a large belly, and a small opening of the tulip bulb bottle, prepare a hydroponic box, tulip hydroponics, the best water quality is pure water, of course, you can also use river water and tap water, but when you choose to use river water to raise flowers, you must choose river water without chemical pollution, tap water also needs to choose precipitation for one to two days before use.

2. Bulb treatment:

Select healthy and plump tulip bulbs and disinfect them, generally you can soak them in carbendazim solution for half an hour, or soak them in chlorothalonil solution diluted 800 times, and then dry the bulbs to start hydroponics.

3. Water-soaked bulbs:

Then place the bulbs in the hydroponic box, pay attention to the placement of the bulbs, and then pour water into the bottom of the bulbs to contact the water, soak the bulbs, and then close the lid of the hydroponic box, taking care not to press the front of the bulls to the tip of the bud hole. The hydroponic box is then placed in a sunny place, and the bulbs usually germinate in about a week.

4. Temperature management

The most suitable growth temperature for tulips is between 15 and 20 years, but the germination stage of tulip bulbs should provide a slightly cooler ambient temperature, which can be controlled at about 10-15, and the low temperature is conducive to the tulip bulbs taking root and germinating as soon as possible.

5. Seedling management

After the bulb germinates into the water-required growth period, you can change the water for 3 or 4 days, when replacing the water, you also need to add some hydroponic flower nutrient solution to it, which can meet the needs of the plant for nutrients in the growth process, each time you change a bottle, it should just meet the water and nutrient needs of the bulb, at this time, you should pay attention to changing the pot, and transfer the bulb from the hydroponic box to the prepared glass bottle.

When raising tulips in water, it is necessary to peel off its brown epidermis, increase the contact area between the plant and water, so that the tulips can grow faster, and then the tulips can be soaked in disinfected water for 6-10 minutes to improve their disease resistance, and then insert the plants into the sterilized vase, and add water beyond the bottom of the bulb to the vase.

1. Handle the bulbs

If you want to grow tulips in water, you need to sterilize the bulbs, you can first peel off their brown skin, then soak the bulbs in a pot with chlorothalonil for 6-10 minutes, and then put them in the sterilized vase

2. Change the water regularly

When raising tulips with water, you need to change the water in the vase once every 3-4 days, so that the water in the vase can be kept clean, and you should also pay attention to the water when changing the water, not all the water in the vase, change half of the water at a time, and the water level can be controlled at two-thirds of the root of the plant.

3. Control the temperature

The most suitable temperature for the growth of tulips is 15-18 degrees Celsius, and when they are raised in water, they should be placed indoors by the sunny window or balcony to allow the plants to grow better, and when the temperature is low in winter, the tulips should be placed in an air-conditioned room to avoid frostbite.

4. Maintenance management

When caring for tulips, place them in a well-lit place such as a balcony, and after the plants have bloomed, move the vase indoors to a less sunny environment to prevent the buds from being burned by the sun and not opening properly.

Hydroculture is possible; Generally, when planting, fill the pot with water first, and it is beneficial to submerge 4 or 5 roots. Place the pot indoors in a well-lit place (preferably on a balcony) at room temperature.

In the process of budding growth, a lot of water is needed, to keep the amount of water in the pot, keep the roots soaked in water, the growth temperature is controlled at 15 18 degrees, the temperature can not be too high, otherwise the stem will be slender and long, affecting the appearance. It is also necessary to turn the direction of the pot frequently, so that the stem can grow upright without tilting (the same is true for plants and flowers in general).

After two to three weeks of growth, there are usually about 5 leaves, and a flower camp will appear in the middle of the stem. At this time, the temperature can also be controlled at 15 to 18 degrees, 5 to 8 days, the flowers will open, and after the flowers open, you can put the pots indoors. (put it in a cool place in the summer, put it on the balcony or coffee table in the winter), the general flowering time can be maintained for 2 to 3 weeks.

Note: The most important thing for hydroponic tulips is to control the temperature.

Water: Ordinary domestic water can be used, and mineral water can also be used if the conditions are good.

<> water to raise tulips first prepare a thin container in the middle and thick at two ends, which can be cut with a mineral water bottle, and then soak the bulbs of the tulip with chlorothalonil solution for disinfection, take it out to dry and put it on the container after 20 minutes, record the position of its bulb disk, and ensure that the water level is level with the bulb plate when filling water, and finally do a good job of maintenance.

1. Container preparation.

Because tulips are not aquatic plants, but bulbous plants, and its bulbs cannot be completely soaked in water, so the container must be thin in the middle and thick at both ends, so that the bulbs can be stuck in the middle, so that its roots are below the stream. Therefore, the chain disturber can choose a mineral water bottle.

2. Bulb disinfection.

Before hydroponic tulip bulbs, the bulbs should be disinfected to prevent the plant from becoming infected with diseases in the future. When disinfection, peel off the bulb skin of the shed, then soak it in chlorothalonil or potassium permanganate solution for disinfection, soak it for 20 seconds and then take it out to dry.

3. Hydroculture planting.

After the seeds are processed, they can be aquacultured, first put the tulip bulbs on the container, and record the position of the bulb disk, and then fill the water to keep the water level at the height of the bulb disk, so that the tulips can absorb water and will not make simple acres into root rot.

4. Key points of maintenance.

Once the tulips are planted, they need to be carefully maintained. First of all, it is necessary to ensure that the environment is warm, tulips can only take root in an environment above 5 degrees, and its optimal growth temperature is between 15-25 degrees, but also to ensure that there is enough light, change the water every 3-5 days, so that it can sprout and take root after a week.

Tulips are raised in the following ways:

1. Seed treatment.

The tulip seeds that have just been bought cannot be cultivated immediately, they need to be disinfected first, and the seeds should be diluted with 75% chlorothalonil 800 times and then soaked for about half an hour before normal hydroponics.

2. Hydroponics. For tulip hydroponics, there is a special culture box, fill the box with water, the water should not be too full, and ensure that the lower half of the bulb is immersed in water. Then place the bulbs upright in the culture box, making sure they don't stagger.

3. Temperature and light.

Put the hydroponically crushed box in a sunny place and control the temperature between 8 and 14 degrees, and the bulbs can take root and sprout in about a week.

Fourth, seedling maintenance.

After the bulbs take root and germinate, they will enter the growth period, and at this time, they need to change the aquarium code on time, usually once every three or four days. When changing the water, you need to pour out half of the water, and then add an appropriate amount of water and a few drops of nutrient solution. When the bulb grows three or four leaves, the flower buds will be gradually withdrawn, and the temperature needs to be controlled at about 17 degrees, which is conducive to the growth of flower buds.

After the buds grow, they will open in about a week, so it is recommended that you wait until the tulips bloom and put them in a cool place to cultivate, which can effectively prolong the flowering period.

To raise tulips in water, you should first prepare a container, disinfect the bulbs and change the water regularly.

Since tulips are bulbous plants, the bulbs cannot be completely soaked in water, so the container must be thin in the middle and thick at the end, so that the bulbs can be stuck in the middle, and the roots can stretch down to absorb water. Generally, you can use a mineral water bottle to talk about the production, cut off the upper part of it and put it upside down in the bottle, so that you can hold the bulbs.

In order to ensure the healthy growth of tulips, they should be disinfected before they are raised in water. Peel off the bulb skin and soak it in chlorothalonil or potassium permanganate solution, the concentration of the solution should be strictly controlled, chlorothalonil generally uses 600 times the solution, and potassium permanganate solution should be diluted to pink. Soak for 20 seconds and then take it out, don't soak it for too long.

Precautions

Place the tulip bulbs on a container and observe and record the position of the bulb disk. Fill in clean water to ensure that the water level is consistent with the height of the bulb disk. If the water is not enough, the bulb will not be able to absorb water, and if it is too high, it will soak the bulb and cause it to rot.

In order to promote the rooting of tulips, the temperature and humidity should be controlled before water cultivation.

Put the bulbs in the environment of 5 to sprout, and the roots will grow after 7-10 days. After that, it can be maintained normally, with a temperature between 15-18, and at the same time make sure that there is enough light to avoid it growing. After the plant takes root, you need to adjust the water level in time, so that two-thirds of the roots can be soaked in water, and the rest should be exposed to air to help the plant breathe.

Change the water every 3-5 days and regularly replenish a nutrient solution rich in phosphorus and potassium to promote flowering.

Tulip cultivation method is as follows:

1. Container and water skin wax excavation

To raise tulips in water, you need to use a container with two thick ends in the middle to breed, so that its bulbs can be stuck in the middle, and the roots can contact the water, and this kind of container can generally be purchased from the market. If you can't buy one of these containers, you can use clean stones to fix the bulbs. Once the container has been selected, it needs to be cleaned and disinfected, and the water quality needs to be clean and clean.

2. Aquaculture operation

Remove the dry skin on the surface of the tulip bulb, then disinfect it with carbendazim solution, and then put the bulb into a container, and add an appropriate amount of water to make the water level consistent with the height of the bulb plate, and it must not be too deep, otherwise the bulb will be flooded with water, and it will be easy to rot.

3. Maintenance management

At this time, it is also necessary to do a good job of maintenance management, at this time it is necessary to move the plant to a shady environment, and control the temperature at about 10, which is conducive to its rooting and germination, and the water needs to be changed frequently during the maintenance period to avoid water pollution, and then gradually strengthen the light, and soon it can grow vigorously.

The environment in which tulips grow

1. Temperature: Tulips are extremely cold-tolerant, and can tolerate low temperatures of -35 during the winter dormant period, but they can also be cultivated in the open field in areas with the lowest temperature of 9 in winter, and the low temperature below 9 will break the dormancy of the bulbs for more than 16 weeks, so that they can grow and develop normally. The suitable temperature of the germination period is 9 13, and the temperature below 5 is basically stopped.

The optimal temperature for growth and flowering is 15-20, and the leaves are easy to grow when they exceed 20.

2. Light: Tulips are local disturbance neutral plants, which do not have strict requirements for the length of sunshine, like light, and are slightly tolerant to semi-shade, but the light intensity is too low, photosynthesis is weakened, and the growth is poor.

3. Moisture: Tulips are neither drought nor moisture tolerant. If the soil is too dry after planting, it will dry up and shrink the flower buds in the early stage, forming "blind flowers".

4. Soil: It likes sandy loam soil rich in humus and has good drainage and aeration, and grows poorly on clay soil. PH is appropriate.

1. Container: When raising tulips in water, you need to choose a glass container with thin middle and thick ends. 2. Hydroponics:

Sterilize the tulip bulbs and place them in a container with one-third of the water. 3. Maintenance: Move the tulips to a semi-shaded place, control the ambient temperature at about 10, and change the culture water every other week.

1. Container water quality

Water tulips need to be cultivated in a container with two thick ends in the middle, so that its bulbs can be stuck in the middle, and the roots can be in contact with water.

2. Hydroculture method

Remove the dry skin on the surface of the tulip bulb, then disinfect it with carbendazim solution, and then put the bulb into a container, and add an appropriate amount of water to make the water level consistent with the height of the bulb plate, and it must not be too deep, otherwise the bulb will be flooded with water, and it will be easy to rot.

3. Maintenance management

At this time, it is also necessary to do a good job of maintenance management, at this time it is necessary to move the plant to a shady environment, and control the temperature at about 10, which is conducive to its rooting and germination, and the water needs to be changed frequently during the maintenance period to avoid water pollution, and then gradually strengthen the light, and soon it can grow vigorously.

1. Bulb treatment.

We first sterilize the high-quality tulip bulbs we bought, soak them in a chlorothalonil solution diluted 800 times, and take them out half an hour later.

2. Water-soaked bulbs.

The sterilized bulbs are dried in controlled water, and then placed in the hydroponic box, paying attention to the position of the bulbs. After that, the tung belt of water is injected to make the bottom of the bulb come into contact with water, and the bulb is soaked.

3. Close the lid and place it.

After the soak bulbs are ready, close the lid of the hydroponic box, taking care not to press the bud tips of the bulbs. Then put the hydroponic box in a sunny place, so that the surrounding temperature is about 8 14 and crack, and wait for 5 7 days after the seed stove wheel closed bulb germination.