The screws of the glasses are broken, and the screws of the glasses cannot be screwed

After the small screw of the glasses arm is removed, you can use a toothpick to clamp the place where the glasses arm is connected to the round frame of the glasses, and cut off the excess part of the toothpick, which can be used to temporarily save the emergency. After the screw falls off, it is recommended to go to the optical store to rematch it, and generally the optical store will not charge a fee, and can provide free help.

Generally speaking, it is enough to find a screw to replace it after the screw is dropped, but the screw on the temple is very small, and the household screw will not help at all. The small screws on the temples are the same, which fits the thickness of the toothpick, so you don't need to panic after the temples fall off, and you can effectively solve the trouble by finding the toothpick through the small hole first.

The toothpick will be stuck tightly in the place that needs to be connected with screws, and it is absolutely no problem to save the emergency in a short time, but you can't use this method for a long time, the toothpick will still fall off after a long time, and it is a solution to go to the optical store in time to replace the new screws.

If it is myopia.

should know that the optical store will provide some small services for free, regardless of whether you have glasses in this optical store before or not, which is the default rule in the entire eyewear industry. Generally speaking, the optician will not charge you for correcting the deformed frames or replacing the screws.

You can fix it with a toothpick, etc., and then go to the optical store to change it, which is basically free.

Summary. Hello, it is a pleasure to serve you

There are two possible reasons why the glasses screws will not be screwed

One is because the screws are rusty, at this time, as long as one or two drops of vegetable oil and engine oil are dipped on the screws, the screws can be restored;

The second is that the method is wrong, the screws on the glasses are relatively small, it is best to use a screwdriver and other tools to press the screws tightly, and then use a screwdriver to twist the screws.

Hello, it is a pleasure to serve you There are two possible reasons why the screws of the glasses cannot be screwed: one is because the screws are rusty, at this time, as long as one or two drops of vegetable oil and engine oil are dripping on the screws, the screws can be restored; The second is that the method is wrong, the screws on the glasses are relatively small, it is best to use a screwdriver and other tools to press the screws tightly, and then use a screwdriver to twist the screws.

Summary. Here's how to deal with what to do if the screws in the eye frame fall off.

The screws of the glasses are off, and you can use a toothpick to jam the place where the temples connect to the frame, so that the glasses can be used normally. At the same time, if the screw of the glasses falls off, you can go to the optical store to get a screw, which will not be charged by the optical store and can provide free help.

Usually, after the screw is dropped, it is enough to find it and install it, if it is dropped and cannot be found, then you have to find another screw to replace it. However, the screws of glasses are very small, and it is generally difficult to find a replacement. So if you are at home, you can use a toothpick to replace it, break the toothpick to the size of a screw, and then place it in the position of the screw.

Because the thickness of the toothpick fits well with the screws, the use of a toothpick can quickly solve the problem of the screws of the glasses falling off, and the operation is relatively simple.

Generally, it is possible to replace the screw with a toothpick, but it must be clamped tightly, otherwise the toothpick will still fall off after a long time, and it is best to go to the optical store in time to replace the new screw, so that it is more assured to use. Most optical stores offer their services for free in order to gain trust and repeat customers.

What to do if the screw in the frame of the glasses is broken.

Hello, your teacher has seen your question and is sorting out the answer for you, please wait a while

Here is the way to deal with the screws in the eye frame that have fallen off, and you can use a toothpick to jam the place where the temples are connected to the frame, so that the glasses can be used normally. At the same time, if the screw of the glasses falls off, you can go to the optical store to get a screw, which will not be charged by the optical store and can provide free help. Usually, after the screw is dropped, it can be found and then installed, if it is dropped and cannot be found, then Zhentong will have to find another screw to replace it.

However, the screws of glasses are very small, and it is generally difficult to find a replacement. So if you are at home, you can use a toothpick to replace it, break the toothpick to the size of a screw, and then place it in the position of the screw. Because the thickness of the toothpick fits well with the screws, the use of a toothpick can quickly solve the problem of the screws of the glasses falling off, and the operation is relatively simple.

Generally, it is possible to replace the screws with toothpicks, but the toothpick should be clamped tightly, otherwise the toothpick will still fall off after a long time, and it is best to go to the optical store in time to replace the new screws, so that it is more reassuring to use. Generally, optical stores will provide services for free in order to win trust and repeat customers.

I hope you can, I wish you good health and a happy life!

Hope mine is helpful to you If you are satisfied with my service, please give a thumbs up (rating in the bottom left corner). Here, I wish you a smooth work and a happy life! If my answer is helpful to you, please give a thumbs up, your support is also the driving force for my progress.

If the screw of the glasses is broken, you can take the following steps to remove it.

First of all, you can use pliers or toothpicks to gently remove the broken screw head, if the broken screw head is not protruding, you can gently clamp one end of the screw with pliers, and then slowly rotate to take out the screw. If that doesn't work, try something else.

Secondly, you can use glue to remove the broken screws, first drop the glue on the screws, wait a few minutes for it to harden, and then slowly rotate the glue with pliers to remove the screws. However, this method requires care to avoid inadvertently damaging the lenses or frames.

In addition, there is also a method of using locking agent, which can drip the agent on the screw fracture and let it soak for a few minutes, so that the locking agent can penetrate into the thread, so that the screw can be quickly rotated out. However, there are many precautions when using locking agents, so you need to be careful.

Overall, pliers, toothpicks, glue, and locking agents are common methods by which broken screws can be removed. However, care must be taken during the operation to avoid secondary damage to the glasses, so as not to affect observation and vision. In addition, it is also important not to use glasses with excessive force to avoid screws breaking.