How to bookmark with butterflies Be simple

Cut off the wings, draw a butterfly body by yourself, and then put it in the plastic film, arrange it, put some dried flowers and hay as a foil, and it is finished.

1. Soften the dead butterfly: put the butterfly in a box filled with moist sand, cover it, and place it for about two to three days, in order to prevent the butterfly body from becoming moldy due to excessive humidity, you can drop a few drops of the carbolic acid or formaldehyde solution in the sand box;

2. Insert the needle: use tweezers to pick up the softened butterfly, carefully separate the wings, insert it from the middle of the middle chest and back of the insect body with a sewing needle, and penetrate it between the two feet;

3. Spread the wings and adjust the posture: spread the wings and adjust the butterfly that has not dried up on the wings spreading;

4. Dehydration and drying: put the butterfly in the dryer in time after spreading its wings and rectifying it, or put it in a ventilated place for five to seven days to dry naturally, avoid sun exposure, and prevent it from mildew and deterioration in the rainy season;

5. Plastic shaping: When the insect body is dry, it is necessary to pay attention to the shaping to make it show a lifelike state;

6. Make a bookmark or: Remove the fully dried butterfly specimen from the winged plate and seal it in the bookmark paper.

The steps of the butterfly bookmark making tutorial are as follows:

Tool: Square colored paper.

1. Prepare a square of colored paper, first up and down, and then fold it left and right.

2. Fold a triangle on the front and back of the small square.

3. Open and fold the triangle down.

4. Turn it over, fold the bottom edge in half, and cut it in half.

5. Fold the bottom edge into a triangle and press it inside.

6. Fold the two surfaces at the bottom up into butterfly wings.

7. Finally, draw the outline pattern on the wings, and a simple bookmark will make the cavity mold.

A bookmark is a kind of label made of paper, electronic, plant leaves, and metal for reading.

It is used to inscribe the title of the book, which is generally pasted in the upper left corner of the cover of the ancient book, and sometimes there is the number of the book and the name of the inscriber and the mark where to read. A bookmark is a small piece of wood that is sandwiched in a book to record the progress of reading. With the development of the Internet era, electronic bookmarks have been derived to record reading progress and experience.

Here's how to bookmark butterflies:

Prepare a square of colored paper, first up and down, then fold left and right in half, and fold a triangle on the front and back of the small square. Open the triangle and fold it down. Turn it over, fold the bottom edge in half, and cut it in half.

Fold the bottom edge into a triangle and press it into it, and then fold the bottom two surfaces up to form butterfly wings. Finally, draw an outline pattern on the wings, and a simple bookmark is ready.

The butterfly bookmark is made as follows:1. Prepare a square of colored paper, first up and down, and then fold it left and right.

2. Fold a triangle on the front and back of the small square.

3. Open and fold the horns of the three eggplant potatoes.

4. Turn it over, fold the bottom edge in half, and cut it in half.

5. Fold the bottom edge into a triangle and press it inside.

6. Fold the two surface layers at the bottom up into butterfly wings.

7. Finally, draw the outline pattern on the wings, and a simple bookmark is done.

Classification of bookmarks:In the gopher client program, all bookmarks appear on a gopher menu. In web browsers, they appear in the hotspot list or in favorites.

Metal bookmark: In addition to the use of paper grinding slag, the bookmark can also be made of high-quality pure copper and zinc alloy raw materials, including nickel-plated paint, sand nickel plating, antique copper, pad printing, gold-plated paint, two-color electroplating, nickel-plated enamel, nickel-plated inlay and other exquisite processes. This is known as a metal bookmark, and it is an innovation in the development of bookmarks.

Tools Raw materials.

Paper jam. Utility knife.

Pen. Method steps.

Prepare a square of colored paper, first up and down, then fold it left and right in half.

Fold a triangle on the front and back of the small square.

Open the triangle and fold it down.

Turn it over, fold the bottom edge in half, and cut it in half.

Fold the bottom edge into a triangle and press it inside.

Fold the bottom two layers up to form butterfly wings.

Finally, draw an outline pattern on the wings, and a simple bookmark is ready.

The meaning of bookmarks:

Bookmarks are to memorize the number of pages of a book. The bookmark is used to inscribe the title of the book, generally pasted in the upper left corner of the ancient book seal Nian Zai Tuan, generally marking where to read, recording the reading progress and sandwiching the small flakes sold in the book, with the development of the Internet era, derived from electronic bookmarks, etc., to record the reading progress and experience and reading position.

As a marker of reading progress, don't pay too much attention. In fact, if you pay attention to it, in fact, a small bookmark often vividly records the life of the past, it is like a mirror, from which you can get a glimpse of the thousand-year-old culture and see all kinds of life.

The method of butterfly bookmarking is as follows:

A 100cm triangular filament of light purple is passed through the circle of the engraved plate and folded in half to obtain four threads.

2. Make a four-strand braid about 25cm long with four strands of four threads.

3. The tail of the four-strand braid is fixed with a snake knot, and then a light purple chalcedony bead of 4mm old shirt is inserted.

4. Tie the light purple triangular silk lumen disturbance Su line with the remaining thread, and the tassel line is about 150 circles and about 9cm long.

5. Take a 50cm light purple triangular silk and tie the head of the tassel with winding, and trim the root of the tassel neatly.

6. Make the axis with four braids, add 6 lines to make oblique knots on it, and leave the same length on the left and right sides. The top 3 are 30 cm, the bottom 3 are 40 cm, and the third line from top to bottom is 13 (white). 6 strands of color lines, and the other 5 are 14 (light purple) 6 color lines.

7. Fix in a different direction, put the long line on the right, and put the short line on the left.

8. The third line from right to left is the axis, and the three lines on the left are winding and do right oblique winding.

9. The second line from right to left is the axis, and the four lines on the left are the right oblique winding.

10. Leave aside the rightmost winding, pull the second winding to the left to make the axis, and the other three lines to do the right oblique winding.

11. Leave aside the rightmost winding, pull the second winding to the left to make the axis, and the other two lines to do the right oblique winding.

12. Leave aside the rightmost winding, pull the second winding to the left to make the axis, and the other line to do the right oblique winding 13, fix it in another direction.

13. The axis winding remains unchanged, and a left oblique knot is made.

14. Pull the wire around to the right to make the axis, and the axis of the previous step and the line that is set aside from the nearest distance are together on the axis to make a left oblique winding.

15. The leftmost winding line is pulled to the right to make the axis, and the other two lines are separated from the nearest line together on the axis to make a left oblique winding.

16. The leftmost winding line is pulled to the right to make the axis, and the other three lines and the nearest line are left obliquely coiled together on the axis.

17. The leftmost winding line is pulled to the right to make the axis, and the other four lines are made left oblique winding on the axis.

18. The last line on the four-strand braid makes eight finch heads on the axis of the previous step.

19. The top four lines leave the innermost line, and the other three lines are cut off and burned and glued.

20. The finch's head knot part is around a circle, the axis is still pulled to the left, and the line left in the previous step is placed on the top of the finch's head knot.

21. The axis is still the axis, and the other line is wound, and an oblique knot is made, so that a small circle is fixed.

22. Winding the wire on the axis, first make half a finch head knot, and then make three finch head knots, a total of three and a half finch heads.

23. Thread the two threads from the finch's head knot to the back, and roll the finch's head knot made in the previous step in the finch's head knot.

24. Cut off the extra three threads and burn them well, and make half of the butterflies.

25. Use the same method to make the other half of the butterfly, if you don't know this half, you can watch the tutorial.

26. Push the butterfly to the right position, so that the butterfly bookmark is ready.

The steps to make a butterfly bookmark are as follows:1. Prepare materials: colored paper, scissors, pencils, glue, colored pens or decorative stickers, etc.

<>3. Cut out the butterfly shape, and after opening it, you get two identical butterfly shapes.

4. Cut a small incision with scissors at one of the butterfly-shaped ** positions to clamp the pages.

5. Add decorations to the two butterfly shapes separately, you can use colored pencils, decorative stickers, etc.

6. Finally, glue the two butterfly shapes together, pay attention to the small mouth of the butterfly shape with a small mouth upward, and this trillion line pattern completes the production of a butterfly bookmark.

Here are a few things to keep in mind when making a butterfly bookmark:1. Be careful when cutting and using scissors to avoid cutting yourself.

2. Be creative when drawing butterfly shapes and adding decorations, but don't make the bookmark too heavy or too thick, so as not to affect the experience.

3. When gluing, make sure that the glue is evenly applied and the two butterfly shapes are tightly glued.

4. The position of the small mouth should be cut appropriately, too small to clamp the page, too big to affect the appearance.

5. Be careful when using bookmarks, and do not forcibly clinch the pages of the book as much as possible to avoid damaging the book.