The living room is tiled, and the bedroom is covered with laminate flooring, because there is a heig

Updated on home 2024-07-11
16 answers
  1. Anonymous users2024-02-12

    With the development of the times, everyone will choose according to their own conditions when decorating, most young people prefer to lay tiles in the living room, and composite wood flooring in the bedroom.

    In this case, do I need to fill in cement for leveling? Generally, there will be related problems in decoration, and the room is shorter than the living room to 5 cm. Laying the floor directly will affect the effect, if you feel that it is not good looking or there is a safety hazard.

    After all, there are elderly people or children at home, and it is still very inconvenient to walk. <>

    Generally, when cement is used to find the floor, the drop will basically be in centimeters. Lay on it to be able to and floor tiles.

    Just equal, of course, there are advantages and disadvantages. The disadvantage is that the foot feeling looks harder, and it does feel very bad if the solid wood floor is covered with cement, so when you choose to decorate the floor, you still have to take it according to your actual situation. But if you don't fill the cement, you will still feel suspended when you step on it, and there will be a knocking sound.

    In fact, there are many people who prefer wooden flooring, according to the people who have come to say that wooden flooring is not practical at all, or it is not as good as ceramic tiles. It is not easy to buy a house, and I hope you can not be careless about the decoration. In particular, hardware products like this can make a difference in poor operation and can also be harmful.

    After all, decorating is not like buying clothes, if you don't like it, you can change it at any time. The decoration is basically to be maintained for decades, and it must be done in one step. When buying materials, you can't be soft-hearted, you must know that you get what you pay for, and if you replace it later, it is more troublesome.

    However, according to the decoration experience, cement is the best way to level, and the others cannot be trusted, otherwise it will definitely affect the problem of foot feeling. Of course, in the process of leveling, it is necessary to do a good job of protective film measures, to protect the wall, and only after drying can it be removed, so that it will not hurt the wall. Generally, the master of tiling or the master of wooden flooring should choose a professional and experienced.

    They all know what kind of way to ensure that the wood floor will not be hollow, of course, the choice of wood floor should also choose the brand to ensure quality.

  2. Anonymous users2024-02-11

    Cement leveling is the best method, and nothing else is advisable, otherwise it will affect the foot feeling. At the same time, you can use a protective film to stick it on the wall to protect the wall, and then take it off when it is dry, which will not hurt the wall.

  3. Anonymous users2024-02-10

    The living room is tiled, and the bedroom is covered with laminate flooring, because there is a height difference, do you need to fill in cement leveling? Of course, you need to find the screen, and if you don't find the screen, it is easy to cause problems in the later stage.

  4. Anonymous users2024-02-09

    Need. If there is a height difference, it is easy to trip if you don't pay attention, and if there are children or the elderly at home, it is necessary to level it to avoid accidents.

  5. Anonymous users2024-02-08

    Normal, the remedy is:

    Lay tiled floors, planing off a height of about 3 to 4 cm.

    Although this method is not expensive and does not increase the height of the floor, there is a premise that the construction must be carried out without damaging the floor slab. Otherwise, the floor slab will be leaked, or the planing will be thick, and the downstairs neighbor's house will crack, which is more dangerous!

    Level the floor with wooden floors.

    At present, there are three main methods of ground leveling: gypsum leveling, cement mortar leveling, and self-leveling leveling. Gypsum is suitable for local leveling, cement mortar and self-leveling are suitable for large-area leveling.

    If the mortar is leveled, it will increase the thickness of the ground, and I recommend using self-leveling leveling, which has the best effect.

    When laying the floor, add a keel or a special foam cushion to raise it.

    The disadvantage of cement leveling is not only high cost, but also increases the bearing weight of the floor slab.

    Since there is an error, it is better to make the error bigger.

    1. In the decoration process, if the floor and tile are used two kinds of ground materials, then the joint between the floor and the tile is a problem that is not easy to deal with. Ceramic tiles must be higher than the floor, the general treatment method is to pave the floor of the room with cement height, this treatment is very simple, is also a relatively simple way, but more expensive and time-consuming, but also increased the height of the ground, so that the indoor height is reduced, change to other ground decoration materials, it is difficult to reduce the height.

    2. There is also a way to use a kind of foam board to raise the floor, this product should pay attention to quality, do not buy recycled materials, the taste is very big, not environmentally friendly, on the other hand, it also has an impact on the life of the floor, because the laminate floor is a lock connection, if the floor is soft, long-term stepping will wear the floor lock and reduce the service life of the floor. There is also a simple way to connect with high and low buckles, but this method is not beautiful and stiff, and it is easy to be damaged by long-term pedaling.

  6. Anonymous users2024-02-07

    Summary. what is the difference in height between brick and wood floors; Hello: I'll help you solve this problem:

    The ground is tiled, and there will be about 3 4cm of cement mortar layer at the bottom, plus about 1cm of tiles, which will be about 4 5cm higher than the previous ground; If the living room and bedroom are covered with composite solid wood flooring, the thickness of the floor is generally moisture-proof mat, if we calculate it, the height of the floor tile will be 3 4cm worse than the wooden floor.

    what is the difference in height between brick and wood floors; Hello: Let me help you solve this problem: the ground is tiled, and there will be about 3 4cm of cement mortar layer at the bottom, plus about 1cm of tiles, which will be about 4 5cm higher than the previous ground; If the living room and bedroom are covered with composite solid wood flooring, the thickness of the floor is generally moisture-proof mat, if we calculate it, the height of the floor tiles will be 3 4cm worse than the wooden floor.

    My home is an old house renovation 'living room tiles and balcony tiles have been pasted up chain failure, now withered out of the shed old now a problem, a total of three rooms, a room balcony error of 1.5 cm, balcony tiles high, living room and room o3 to not much what I do now.

    It is recommended that for the ground with different rock yard drops, the ground height should be increased by wooden board or foam layer, and it is made up, in fact, many families will connect the balcony and the living room together to do decoration, although the stove is very coarse and convenient, but to pay attention to the details, according to their own house type and preferences reasonable arrangement is the key.

  7. Anonymous users2024-02-06

    It is necessary to level before it can be paved, otherwise there will be a gap. If it has been paved, it is estimated that it will be difficult to remedy. It is advisable to lay a mat at the drop-off.

  8. Anonymous users2024-02-05

    It's normal, it's good to make a lintel, don't worry, it's generally not too bad, if it's higher than 2-3cm, you will engage others to put it, this is called unprofessional, upstairs said within 1cm is completely normal, this is related to the size of your floor tiles, thickness, floor laying method, thickness, the error is not big, of course, it is much worse that the decoration master and design are not professional or careless.

  9. Anonymous users2024-02-04

    Generally, after the living room is installed with tiles, the distance between the bedroom store is generally 3-5 cm, and the bedroom floor is reinforced by solid wood, if the floor is directly paved and the living room will definitely have a gap, and the overall is not beautiful. Generally, when buying flooring, you should consider this problem, use cement and sand to find high, or use the bedding treasure to find the height (the bedding treasure is slightly cheaper), and then the floor is paved after finding the height, so that the whole is beautiful. My friend's wooden floor is made of bedding treasure, so that the living room and bedroom look more comfortable as a whole.

    If the gap is large, the workers are very irresponsible.

  10. Anonymous users2024-02-03

    1 point is normal, more is abnormal, and some waterproof glue is played.

  11. Anonymous users2024-02-02

    It is recommended that you negotiate with the renovation company to see if you can make up for it.

  12. Anonymous users2024-02-01

    You can start by laying floor tiles in the living room.

    The floor level is then leveled with cement and sand.

    Before the actual paving, the floor tiles should be tested and paved, and the floor tiles should be directly placed on the adhesive layer according to the requirements of the actual paving, and the rubber hammer should be vibrate. On the one hand, to ensure that the floor tiles are smooth and the gaps are straight, on the other hand, the bonding lamination disaster, if it is not true, it is necessary to fill the mortar, and if it is too much, the excess mortar will be shoveled.

    In the actual paving, the rubber hammer should be used to vibrate, the force is even, in order to prevent damage to the floor tiles, check the flatness with a level, and check the smoothness of the brick joints by checking the smoothness of the brick joints, requiring the surface to be smooth, the color is consistent, the brick joints and cross joints are smooth, the joint height is consistent and smooth, and the bonding is dense and firm without hollowing.

    Achieve the elevation and design requirements of the finished surface.

  13. Anonymous users2024-01-31

    Living room 4 meters open, about 25 square meters, if you want to lay floor tiles or choose 800 * 800 porcelain floor tiles better, it looks more coordinated, the height difference is not a matter for professional decoration, you can first lay the living room floor tiles, and then use cement and sand to level the floor height, don't worry about moisture, there is a layer of moisture-proof film under the floor, speaking of these things are not a thing, simple.

  14. Anonymous users2024-01-30

    1. Now it is more popular to have 800*800 specifications, which are more atmospheric.

    2, must be leveled, cement sand can be dried and then paved, if you are not good first, you can first brush a layer of ground paint.

    3. There will be a height difference, it is best to make a threshold stone, the height of the high floor tiles, the color of the dark color, which can not only play a role in space segmentation, but also solve the height difference.

  15. Anonymous users2024-01-29

    I think 600 is good, so it looks like more space! And your home improvement is not tooling, 600 is very suitable! If you are worried about dampness, you can add a moisture-proof mat under the keel when laying the floor! That height difference of yours, it seems that it is difficult to solve!

  16. Anonymous users2024-01-28

    How to decorate the two vertical beams in the living room.

    1. Carry out cover-up.

    When there are two vertical beams in the living room, the ceiling can be covered, because there are beams in the living room is taboo in feng shui, and the ceiling can not only have a good decorative effect, but also can be effectively covered by the two vertical beams in the living room.

    2. Use vertical beams for decoration.

    You can add a few more vertical beams next to the vertical beam, and use latex paint to paint the vertical beam and the added several vertical beams, and use it as a part of the living room ceiling decoration chain. Or add two beams to make a square chandelier pool for decoration.

Related questions
9 answers2024-07-11

You can tell the pros and cons, thank you! 

9 answers2024-07-11

It is recommended that the landlord's living room use imitation solid wood! Because the living room has a large flow of customers and more cleaning, the imitation solid wood floor has 46 grams of film, and the life is longer! >>>More

16 answers2024-07-11

Is it better to have tiled or wooden floors in the living room? Why? >>>More

7 answers2024-07-11

Home décor is usually paved with wooden floors or tiles. The cost of using wooden flooring is relatively high, but it can reduce noise, moisture absorption, etc. So, today we will learn about the steps of laying wood floors, what should you pay attention to when laying wood floors? >>>More

5 answers2024-07-11

To decorate with baseboards, cover the gap between the floor and the wall, and use a closing strip if you don't need a baseboard, made of solid wood, polymer, and aluminum alloy.