What should I do if the camellia potting soil at home is too wet?

You can find a cloth that can absorb water, spread it on the surface of the potting soil, and then buy some desiccant on the cloth, you will find that the desiccant will quickly change from dark blue to rose red, at this time you can change the new cloth and desiccant to absorb, and then dry the wet one, repeating it several times can effectively solve the problem of the potting soil being too wet.

If it is just because of too much watering, and its potting soil is not bad, it can be placed in a well-ventilated and well-lit place to dry, but it should be noted that camellia is afraid of strong winds, so ventilation should be mastered to a degree, not strong winds, otherwise it may fall leaves or fall buds. You can put a brick or wooden board under the pot to enhance the ventilation of the bottom.

If the potting soil is too wet, you can replace part of the surface layer, be sure to put it in a ventilated place, if not, take a fan to blow it next to it for a while, otherwise it will accumulate water for a long time, the ventilation is not good, and it is easy to drop the buds and leaves, and the yellow leaves. Camellias are still quite easy to feed, and now the camellias we have here are already starting to bloom beautiful and bright flowers.

Camellia is a sun-loving flower, which is sensitive to light and temperature, and is not resistant to low or high temperatures. It is suitable for growing in an environment of 15 to 25. Therefore, cultivating camellia needs to be protected from cold in winter and high temperature in summer.

The growing soil is suitable for loose and fertile, slightly acidic sandy soil with good air permeability. Afraid of stagnant water, the potting soil is too wet and easy to cause root rot, which is not conducive to growth.

Usually water the potted camellia plants, as long as you see a little moisture in the potting soil, don't rush to water again. Especially in winter, it is necessary to reduce the number of watering, this time is generally the time for the bud to germinate, or the flowering stage, reduce watering, and put it in a sunny place, so that the flowering time will be longer. ‍‍

If the potting soil of the camellia is wet, either it is put on the terrace outdoors and it rains a lot, stop the rain at this time, put it in a ventilated and dry place to blow it, breathe, and do not water it until the potting soil becomes dry.

In the process of planting camellias, it is sometimes encountered to put some plant ash in the flower pot, especially in the courtyard planting camellia will often see, plant ash is not only beneficial to camellia, but also can effectively absorb water. Therefore, buy some plant ash and spread it evenly on the potting soil, which can quickly absorb water, and can be used as fertilizer for uniform mixing.

If the camellia pot soil at home is too wet, it is willing to put it on the sunny windowsill to absorb the sun.

Just move it outside, or a more ventilated part of the balcony, and wait for the soil to dry a little before moving indoors.

I think it's because of the soil quality, the soil for cultivating camellia needs acidic humus soil with pastoral soil, which has good air permeability and does not store water.

How to keep the soil in the pot wet for a long time:

Move the pot to a well-ventilated place for a period of time, good ventilation can speed up the evaporation of water and improve the problem of over-wetting of potting soil.

Pour an appropriate amount of plant ash into the potting soil.

Grass ash can absorb some water and alleviate the problem of over-wetting potting soil. Moreover, plant ash also contains a variety of nutrients, which also has certain benefits for the growth of flowers, and can play a role in supplementing nutrients.

You can depot the plants, and take the plants out of the pot with the mound, but do not break them up, and then put the mounds with the plants in astigmatism.

Place in a ventilated place for a while. By removing the obstacle of pots, the soil can be dried quickly.

If the ventilation at home is poor and there is no plant ash around, you can also cover the dry soil of the pot with a layer of cloth, and then apply desiccant.

Place on a flower pot. The function of desiccant is to absorb water and keep it dry, desiccant can improve the situation that the potting soil is too wet, and prevent flowers from rotting their roots due to excessive watering.

If it's just because of too much watering, and its potting soil is not badly breathable, you can put it in a well-ventilated and well-lit place to dry, and you can put a brick or wooden board under the pot to strengthen the bottom ventilation.

If it is because of the poor air permeability of the potting soil and excessive watering, the soil is not dry for a long time, it is necessary to replace the potting soil, otherwise it will take a long time, and the aerobic respiration of the plant roots will not be smooth, which may cause flower and leaf drop.

Of course, flower pots and soil should choose good air permeability, you can buy nutrient soil from the Internet, or prepare it yourself with humus, perlite, etc., flower pots are recommended to choose tile pots, pottery pots or plastic pots, try not to choose porcelain pots, porcelain pots have poor air permeability, and they are not easy to dry after watering. Before adding soil, you can spread a layer of ceramsite, small stones or tiles on the bottom of the pot to strengthen the ventilation and drainage of the bottom.

When changing pots, you need to be careful because you need to clean up the soil, otherwise you will damage the root system. It is recommended to soak the soil in water after cleaning the external soil, and soak the soil close to the root system, so that the root system is less damaged. After repotting, put it in a cool place to give the plant time to pot, and do not need to water it if the soil is moist.

Extended information: There are two main ways to water azaleas, namely pot watering and soaking pots.

1) The pot surface watering method is to water directly on the surface of the pot soil.

This method is the most commonly used watering method when producing rhododendrons. Usually there is a mist nozzle at the nozzle of the watering can. When watering rhododendron potting soil, it is best to remove this sprinkler or water it with a rough-eyed sprinkler so that it can be watered thoroughly.

The mist sprinkler is more effective when spraying the whole plant to increase humidity, but watering the potting soil with it often forms a backwater due to impenetrable watering, which is not good for the growth of rhododendrons.

2) The soaking pot method is a watering method that allows water to be immersed in the potting soil from the drainage hole at the bottom of the pot.

With this method of irrigation, the roots of the plant are evenly watered, and they are not susceptible to fungal diseases and do not damage the soil structure. Especially when using peat and pine needles to cultivate rhododendrons, the pores are often too large after the substrate is dry, resulting in the phenomenon that the water directly penetrates the drainage holes from the gaps and the substrate is not completely wet. The disadvantage of this method is that the operation is more troublesome, and because the direction of water movement is from the bottom up, it often causes the salt concentration of the topsoil of the pot to be higher, so it cannot be used frequently.

Replace the flower pot with a new one, it may be that the hole at the bottom of the flower pot is blocked and the water can't come out, and the sun on it must be wet and not so quick to dry. So one is to replace the flower pot with a new one, and the other is to clean up the flower pot, empty the flower pot hole, and don't water too much, just appropriately.

Under normal circumstances, it is dry and watered thoroughly, it doesn't matter if the soil is dry, dry and then watered, otherwise it is easy to rot the roots, potted plants are generally short of fertilizer, you can add some nutrient solution every time you water, and the plant grows better and more vigorously.

The potting soil is always wet and does not dry for a few days in summer, which is due to the use of universal nutrient soil, which does not dry out for a long time after watering. This is the relationship of poor air permeability, and the soil is in a humid environment for a long time, which is easy to lead to root rot of plants.

Watering should also vary depending on the soil. Soil fertilizer and water retention are good, not easy to dry, watering less, thin soil is easy to dry, watering more. Those with fast permeability should be watered frequently and more often, and those with slow permeability should be watered less.

Camellia is one of the four famous flowers, has always been loved by people, now many flower friends raise camellia at home have been full of buds, as long as the maintenance is appropriate, and then after a period of time can bloom. Recently, there are often flower friends who leave messages asking whether camellia can be fertilized in winter, and whether fertilization will affect the normal flowering of plants.

In fact, for the question of whether camellia can be fertilized in winter, it is necessary to decide according to the maintenance environment, most of the flowers have entered a dormant state in winter, and camellia is in the stage of breeding buds, in the case of suitable temperature, the plant still needs nutrients to grow and develop buds, when the nutrients are insufficient, there will be a phenomenon of buds falling.

Camellia. How to fertilize camellia in winter?

Camellia can be fertilized in winter, the key depends on the temperature of the maintenance environment, such as the temperature in the northern region is low, if there is no indoor heating, then the plant is in a state of stopping growth, you can not fertilize it, otherwise it is easy to cause root burning.

If the indoor temperature is above 15, the maintenance environment is relatively warm, the plant will continue to grow buds, but it can be properly supplemented with some nutrients, fertilization in winter needs to pay attention to the fact that nitrogen fertilizer can not be applied to it again, because the plant is in the stage of growing buds, this time to apply nitrogen fertilizer, will cause the buds to fall.

During the period of giving birth to the flower bud of the camellia, you can appropriately apply some thin phosphorus and potassium fertilizer to it, mainly in order to make the plant grow quickly and the flower buds bloom.

Pay attention to freeze protection. Although camellia also has a certain ability to withstand cold, but in winter it is still necessary to do a good job of thermal insulation and cold protection measures, if the ambient temperature is lower than zero, it is easy to frostbite the buds, causing the buds to dry up and fall. <>

Camellia. If you want it to bloom in winter, you should move the potted plant indoors to a sunny environment for maintenance, and the ambient temperature is above 15, so that the plant is more likely to bloom. If the ambient temperature is below 10, it is generally not possible to bloom properly until the spring is warm.

Click Enter a description.

The potting soil should not be too wet.

Many flower friends reflect that camellia in winter is always the phenomenon of falling buds, this situation is mostly because of the water is too diligent, so that the potting soil is too wet, in the case of low temperature in winter, the basic semi-dormant state, water absorption is also very little, if watering too much, it will lead to root rot, causing the buds to fall.

Camellia. In winter, when maintaining camellias, you don't need to water it too often, and it doesn't matter if the potting soil is a little dry, you should wait until it is completely dry before watering it. Reasonable lighting.

Raise camellia in winter, do not put it in an environment that lacks sunlight, which will affect the growth and development of flower buds, and when you do not see sunlight for a long time, it is easy to cause flower buds to fall. The light is very weak in this season, so you can put it in a place with direct light, so that it can fully receive the light and carry out photosynthesis, which is more conducive to the flowering of the plant.

The soil inside the pot is too wet and can be solved using the following methods:

1. You can find a cloth that can absorb water, spread it on the surface of the potting soil, and then buy some desiccant to put it on the cloth, you will find that the desiccant will quickly change from dark blue to rose red, at this time you can change the new cloth and desiccant to absorb, and then dry the wet one, and repeat it several times to effectively solve the problem that the potting soil is too wet.

2. Place the flower pot in a ventilated place, and then use chopsticks to insert some small holes in the soil to let the soil air dry. You can also add an electric fan to blow at it to speed up air drying.