Municipal heating is better, or community heating is better

The difference between district central heating and municipal central heating: district central heating refers to regional boiler room heating, and the general heating range is small. Municipal central heating is provided by large boilers or combined heat and power, and the heating range is generally more than several million square meters.

Central heating refers to a form of centralized group heating. Generally, it is charged per square meter (construction area) for a heating season, for the northern region.

The weather is colder and needs to be heated for a long time, so you should save money by central heating.

In terms of energy utilization, the one-time investment in central heating is large, the operating cost is high, whether it is needed or not, the heating is always heated all day, and the temperature is uneven due to different floors.

Central heating has a power pump in the system heating, that is, a very small heating system has axial flow pumps.

to power the circulating water. in the family'earth heating', generally by artesian circulation. Radiator.

The inlet is higher than the outlet of the furnace, and the hot water heated is relatively light'liters'In the radiator, after the heat exchange, the circulating water in the radiator becomes cooler, becomes heavier, and flows back to the heating furnace.

Generally speaking, the community is better, of course, it is also related to the property of the developer in your community, if you have a better developer there and a better property support, it should be better than the municipal, at least the heating temperature is higher than the municipal, and the municipal is better. Municipal heating is mainly very stable, the temperature is OK, and it is divided into places. General district heating is also a common municipal pipeline, which is equivalent to the secondary heating of municipal heating.

1. The newly built community first needs to meet the receivable standard, that is to say, its equipment and facilities have been improvedand delivery to be able to be heated. Another requirement is to consider the occupancy rate, the general occupancy rate must reach more than 50, before the central heating method can be adopted.

2. The staff of the heating company will come to install the relevant equipmentTo meet the requirements of heating, it is necessary to pay the supporting fee, and only after all the facilities are accepted can the central heating be possible.

Taking Lanzhou, Gansu Province as an example, according to Article 20 of the Implementation Measures of the Regulations on the Management of Urban Heating in Lanzhou City, the heating unit shall ensure the quality of heat supply. The pass rate of room temperature of heat users in non-household heat metering areas shall not be less than 97%, and the indoor temperature shall not be less than 18 day and night, except for one of the following circumstances:

1) The heat user alters the indoor wall structure and heating pipes without authorization, or packages the heating facilities.

2) The design and installation of the heating system of the heat user do not conform to the national norms and have a substantial impact on the quality of heat supply.

The circumstances listed in the preceding paragraph shall be verified by the heating management agency.

Article 22 of the Measures for the Implementation of the Regulations on the Administration of Urban Heating Supply in Lanzhou City If the heating quality of the user for more than 24 hours is not up to standard due to the responsibility of the heating unit and is verified by the heating management agency, and is lower than the room temperature qualification standard within 2, the heating unit shall refund half of the heat fee for the low temperature period to the heat user on a daily basis; If it is lower than the room temperature qualification standard 2 or more, the heating unit will refund the full amount of the heat fee for the low temperature period to the heat user on a daily basis.

Article 23 If the heating quality of the heating pipe network operator is unqualified due to the responsibility of the heat source plant, the heating unit shall refund the heat consumption fee to the heat user in accordance with the provisions of these measures; However, 50% of the cost of heat reduction shall be borne by the heat source plant and shall be compensated to the heating unit.

Municipal heating is urban central heating. The city centrally prepares the heat source for heating, and then distributes and transports it to the heat users separately. It is called urban central heating, and municipal heating is relative to individuals or small collectives.

Municipal heating can reduce floor space, reduce air pollution, and save energy. In contrast to municipal heating, there are also collective small boilers and household heating. <

Municipal heating is urban central heating. The city centrally prepares the heat source for heating, and then distributes and transports it to the heat users separately. It is called urban central heating, and municipal heating is relative to individuals or small collectives.

Municipal heating can reduce floor space, reduce air pollution, and save energy. In contrast to municipal heating, there are also collective small boilers and household heating. The collective small boiler is a small heating equipment set up by itself limited to a unit or several living quarters, and the coverage is generally small.

Home heating is to set up small heating equipment for the family unit for their own use.

Hello kiss hello I am happy to solve the problem for you: municipal heating or community heating is better, the answer is: the community heating is good Oh kiss heating is to use artificial methods to supply heat to the room, so that the indoor temperature is maintained, in order to create suitable living conditions or working conditions of the technical heating system consists of three main parts: heat source (heat medium preparation), heat circulation Chang nuclear front system (pipe network or heat medium transportation) and heat dissipation equipment (heat medium utilization).

The basic working principle of the heating system: the low-temperature heat medium is heated in the heat source, and after absorbing the heat, it becomes a high-temperature heat medium (high-temperature water or steam), which is sent to the room through the transmission pipeline, and the heat is released through the heat dissipation equipment to increase the indoor temperature; After heat dissipation, the temperature decreases and becomes a low-temperature heat medium (low-temperature water), which is then returned to the heat source through the ** pipeline for recycling. In this way, the heat is continuously sent from the heat source to the room to supplement the heat loss in the room and maintain a certain temperature in the room.

The two-point route is the shortest.

Paths are the worst problem with heating bills.

Heating method: Buyers must consult clearly when buying a house. Otherwise, the annual "heating season" may become a "troubled season". At present, the more mainstream heating methods on the market are:

For the way of district heating, the general consumer does not pay much attention. In the past, factors such as house prices and location were the main factors for buyers to investigate and choose, and only after moving in will they realize how important a factor community heating is!

So, will the change of heating mode become a trend in the process of real estate development?Will it become a key factor for consumers to choose to buy a home in the future?

Municipal heating is a system in which one or more heat source plants supply heat to each unit or living quarter.

Municipal heating in Xi'an runs from November 15 to March 15 of the following year, with two billing modes. One is to charge according to the area, per square meter per month. The other is to be billed according to the amount of traffic used, which is more flexible.

Disadvantages: The heating time cannot be controlled by yourself, in case the cold wave comes early or the weather warms, the heating cannot be stopped in time**.

District central heating.

Community central heating is relative to municipal heating, and the boiler built by the community heats the residents of the community.

Advantage: Since the heating system is small and located inside the community, problems can be detected and dealt with in time.

Disadvantages: Opaque and the central heating in some communities is too high. At present, Xi'an uses its own boiler heating community, **not by ** pricing, the cost is priced by the community after accounting, and the owner of the charge details, Xi'an some community heating costs up to 8 yuan a month.

There are some districts where the central heating is not 24 heating.

Since the heating equipment is inside the community, there will be some safety hazards.

In short, municipal heating and community central heating have their own advantages and disadvantages, buyers can choose according to their own preferences, before buying a house must figure out which heating method the real estate supports.

Winter to get it, so that many people pay attention to the problem of heating, in fact, before the winter comes, it should be solved to solve the heating, after all, in the heating, many types of things are not easy to deal with, if you are in a hurry, it will inevitably make some details of the problem, why not the community to receive municipal heating? What are the methods of municipal heating? Winter to get it, so that many people pay attention to the problem of heating, in fact, before the winter comes, it should be solved heating, after all, in the heating, many types of things are not easy to deal with, if you are in a hurry, it will inevitably make some details of the problem, and recently many people in the community because they just understand the gas, so they are also initially doing heating surveys, so why not the community is connected to municipal heating?

What are the methods of municipal heating?

Why doesn't the community connect to municipal heating?

There is only one reason, that is, the conditions are not enough, municipal heating is also called urban central heating, and the heating medium is transported and distributed to heat users by the urban central heating heat source, which is called urban central heating, and it is called municipal heating is relative to individuals or small collectives. Some communities may not have it because of different policies.

In contrast to municipal heating, there are also collective small boilers and household heating. Collective small boiler is limited to the unit or one or several living quarters, its own small heating equipment, generally covering a small area. Home heating is to set up small heating equipment for the family unit for their own use.

Compared with municipal heating, the latter two resources are wasteful, seriously polluting the environment, and not safe.

What are the methods of municipal heating?

1. Central heating.

In northern China, central heating is mainly used, which is provided by heating companies or community boiler rooms. At present, the vast majority of domestic heating systems use coal-fired, gas-fired and oil-fired boilers as heat sources through the external network.

Or the intranet is connected to the indoor system. Of course, in addition to this, they will also be accessed through the **air conditioning system.

2. Household heating.

Household heating, that is, independent heating, is a heating method that challenges the monopoly position of centralized heating, and is more independent and selective than centralized heating.

3. Household air conditioner heating.

Due to historical reasons, there is generally no central heating in the south. The humidity in the south accelerates the heat conduction.

Under the combination of cold and wet, the south is even colder, which is simply "cold to the bone marrow".

Air conditioning for heating has become a common choice. This method has the following advantages: 1. It does not burn coal and does not produce choking soot; 2. Switch on and off at any time to save costs; 3. The heating temperature can be adjusted at will; 4. There are many air conditioning brands and products on the market, and there is a lot of room for choice.

Generally, choose products (such as Gree air conditioner), the quality is more guaranteed.

The above content mainly describes why I don't have municipal heating for the community? What are the specific introductions of municipal heating methods, many things on heating have to be combined with some factors, such as in terms of norms, the norms in the policy determine various events, so if you want to understand it very clearly, the policy must of course be understood, although the heating is said to be a common thing, but in the process, it is still not very easy.