-
The weather is getting colder and colder, and many customers are beginning to worry about the heating problem in winter, which method to choose for heating. Heating equipment includes electric water heaters, electric fans, air conditioners, floor heating, and gas sheets. Why do most people like to install radiators in their homes?
Let's introduce it to you.
The gaspiece is easy to operate, and the estimated ambient temperature can be reached within 20min after opening, and it can be cooled out in time after being turned off. Customers can be sensitive, especially for salarymen, who can lower the ambient temperature before going out in the morning, and then raise the ambient temperature after work, and can quickly experience warmth and comfort. If some houses are not habited by permanent residents, they can also be turned off by the temperature control valve and the goalkeeper flap to prevent waste.
Compared with other heating equipment, it is more comfortable, environmentally friendly and energy-saving.
There are a variety of shapes of ambiguous films, such as new Chinese, European, simple European style, classical style, contemporary, etc., and there are also more than a dozen shades, which can also be humanized according to customer preferences. Dress up home furniture, correctly guide the contemporary people's yearning for exquisite life, and make our life more delicate.
The purchase and installation of the gasser will not be affected by the season, and it can be assembled all year round. The radiator factory has more than 300 physical line stores across the country, all year round. The installation of radiators is very convenient, about divided into several parts of slotting, pipe, assembly, and hydrostatic test, and generally the two-bedroom can be installed in one day, which is not easy to delay normal life.
There wasn't much noise during installation and it didn't affect the next-door neighbors. It is very convenient to maintain the equipment in the middle and late stages. After some years, it can be disassembled and replaced at any time.
The number and number of blocks of the ambiguous sheet are easy to assemble, and it is recommended to install 2 more groups in the rooms of large houses, and one group of houses in small houses is sufficient. Therefore, it does not pick the type of house, both large and small houses can be assembled, and the purchase and installation fee is determined according to the total number of assemblies. If the size of the room is very small, you can also choose the form of buried water, burying the tap water pipes under the road and the wall, and only the ambiguous gas piece is exposed.
In the northern family, the gas sheet is a good companion for many people's home heating, and in the southern region, the gas film is gradually settled in every home. I feel that in the future life, the advantages of ambiguous tablets will be more obvious and more and more popular.
-
The biggest difference between radiators and other heating equipment is that it will be more convenient and fast, and the hot water used is very small, the advantage is that it is very simple, and the cost is not particularly high, and it can also warm the whole room.
-
To be honest, the advantage of radiators is that they are energy-saving and environmentally friendly, and the operation is also very convenient, so it is still very recommended.
-
I think the main advantage is that the radiator is particularly cost-effective, and the heating efficiency of the radiator is very high, the temperature is also high, it is more comfortable to use, and it is very energy-saving and environmentally friendly.
-
Floor heating and radiators have their own strengths, and you can choose according to your actual situation. The best is what suits you, and both heating systems have their own advantages. At work, I have encountered many homes with central heating that used to be radiators, but I couldn't help but change to floor heating, and the result was that the heating effect was worse.
The reason is that the floor heating pipeline is long and the pipe diameter is thin, so the resistance is great, while the radiator pipeline is short, the pipe diameter is large, and the resistance is small. In this way, a unit is divided into households for heating, the resistance of the floor heating family is large, and the resistance of the radiator family is small, so that the hot water will be easier to flow through the radiator, and it is not easy to flow through the floor heating family, so that the flow rate of floor heating is reduced, and the heat obtained per unit time is reduced by the ruler. So, remember, don't change the radiators for central heating to underfloor heating.
Let's take a lookRadiator or underfloor heatingIt's more suitable for everyone to use!
Clause. 1. Comfort comparison: floor heating is more comfortable.
Floor heating: At present, it is recognized as the best heating method, using low-temperature floor heating heating method, "warm feet and cool top" soles are warm, which is most suitable for people's physical temperature needs, constant temperature, uniform heat dissipation, no hot wind blowing feeling, not easy to produce floating dust, clean and environmentally friendly.
Radiator: In the way of convection heating, the radiator heats the surrounding air by convection, so that the air forms convection in the room to achieve the purpose of heating, the temperature of the radiator is slightly higher when the temperature is not bucket, and then decreases with the increase of distance, the temperature difference in the same room is larger, it is more obvious in the large space, and the comfort is slightly worse.
Clause. 2. Comparison of heating speed: the radiator heats up more rapidly.
Floor heating: people who have used floor heating know that floor heating is slow, and it generally takes several hours to reach a comfortable temperature, the main reason is that floor heating uses low-temperature water radiation, and the surrounding radiation objects can be heated before they can be gradually radiated, and finally the air in the room can be heated.
Radiator: The radiator heats up quickly, and the temperature of the room can reach a comfortable temperature within half an hour from opening, and it does not need to be heated for a long time, so that it can be turned off at any time, which is suitable for most white-collar office workers.
Clause. 3. Comparison of installation convenience: radiator installation is more convenient.
Floor heating: Floor heating is a hidden project, the amount of work is large, especially the laying of floor heating pipes should be very careful, to avoid water leakage in the later stage, and only the rough house can install floor heating, there are certain conditions.
Radiator: There are two ways to install radiators: open and concealed, and two ways to dry and grind in the blank room. Concealed pipes are hidden, the construction is slightly complicated, and the house that has been renovated can only choose the surface-mounted installation method, and the open-mounted pipelines are short, convenient and fast, and the beautiful pipe technology of Huashang HVAC is a major breakthrough in the installation of open pipes.
The above is a detailed answer about radiators or floor heating, I don't know if you are satisfied with our introduction.
-
We need to know some related problems of radiators, so that they can be better used after installation. Radiator purchase and installation will care about quality, after-sales, installation and other issues, care about maintenance, cleaning and other issues during use.
When it comes to cold days, radiators are not only a tool for heating, but also a "universal tool"!
Now let's learn about the magic skills of the radiator, such as putting the orange peel on the radiator and baking, the house is full of natural fruit aroma, and you can also heat milk and soy milk on it, but remember not to leave it for too long, otherwise it is easy to deteriorate and lose nutrients.
There is also a very important skill, that is, with radiators, dryers do not need to be bought, shirts, underwear, socks, towels, insoles are all refused, if the rain and snow accidentally shoes are wet, go home at night and put the radiator on the next day to warm up.
In addition to the above, everything that can make the heating "make the best use" can also be put a lot, but also pay attention to some actions can not be operated, such as the radiator is to move the hot water circulation to heat up the room, but the water in the radiator can not be released to wash clothes, if too much water is lost, it will affect the overall heating temperature of the radiator, and the water in the radiator is softened water that has been treated with antiseptic, and there are chemicals in the water, which will be harmful to health.
Tips for using radiators.
01 The heating is not hot, or it may be that the heating service life is too long, and the scaling and thermal resistance of the inner wall of the pipe increases, resulting in poor hot water circulation and indoor temperature. The service life of the old-fashioned radiator is about 20 years, and the service life of the new radiator is about seven or eight years, and 10 years has basically reached the limit. In this case, residents should replace the heating with a new one before the maximum service life is reached, according to the actual situation of the house.
02 There are also some heating that is not hot caused by the user, such as overloading more radiators, installing water drain valves without permission, installing water circulation pumps, etc.
03 The radiator should be maintained at ordinary times, and it should be cleaned regularly to ensure that the radiator can be heated normally. At home, you can remember the after-sales service**, and deal with it in time once there is a problem with the radiator.
-
Do not cover it with damp clothing. Don't touch its pipes. Don't block him, give him plenty of space to dissipate heat. Keep it closed when you're not at home for a long time. Don't lean on for long periods of time.
-
When using, you should pay attention to the time, and you should put water before use, and put the excess water out of it, so that you can better supply gas, so that you can have the effect of heating, otherwise it will affect the feeling of use, and you should pay attention to this knowledge.
-
Heating is still very widely used in the north, pay attention to the material of heating, most of them are mainly steel or aluminum composites, but steel is not suitable for installation in areas with poor water quality, steel and aluminum composite will be better, but also pay attention to the home decoration style to match, it will look more beautiful.
-
The valve on the radiator can not be opened and closed at will, do not pile up debris on the radiator, it will affect the heat dissipation effect, and the position can not be changed arbitrarily when using the radiator radiator.
-
When using the heater, be sure to put water in advance, so that the heating will be hotter, after using the heater, you should fill it with some water, so that it will not rust.
-
Pay attention to frequent ventilation, and to ensure the humidity of the air, but also to pay attention to the maintenance of water temperature in the heating, and pay attention to eliminate potential safety hazards, regular inspection and maintenance.
-
The radiator uses a wall-hung boiler or boiler to heat the circulating water, and then connects to the radiator through a pipe, and finally outputs the appropriate temperature through the radiator to form an indoor temperature difference, and then carries out thermal circulation to make the entire indoor temperature rise uniformly. So, what are the advantages and disadvantages of radiators? Let's follow the golden flagship flag brother to find out.
Two or three things about radiators, let's first understand the basic situation of radiators.
The inside of the radiator is a sealed circulation system. When the water flows in the pipe of the radiator, it will produce a heated gas, and the air and objects below this temperature in the external environment will be heated, and the temperature of the water inside the radiator will be reduced according to the principle of energy conservation. As the water continues to circulate, the cold water returns to the heat source for heating.
First, the temperature rises quickly.
Compared with underfloor heating, radiators heat up relatively quickly. It is suitable for on-the-go use, and is suitable for office workers to stay at home for a shorter time.
Second, easy to install.
The radiator is simple to install, and can be installed after the whole house decoration is completed, **need to be installed**. Floor heating is the installation of the whole house on the ground, and the decision needs to be made before the decoration.
3. Easy maintenance.
If there is a problem, it is also easier to repair the radiator, and it is easier to troubleshoot. There is no need for a big construction like underfloor heating.
Fourth, the cost performance is high.
Compared with underfloor heating, installing radiators is more cost-effective. There are many choices when purchasing radiators, such as material, style and color. First of all, there are many choices of materials: cast iron radiators, steel radiators, cast aluminum radiators, copper-aluminum composite radiators.
Steel radiators:
The advantages are good aesthetics, high cost performance, easy to obtain materials, and pollution-free operation; In view of the problem that traditional steel radiators are prone to oxidation and corrosion, some enterprises have researched and developed upgraded products - anti-corrosion diamond, aluminum-magnesium alloy process, so that the radiators are more durable and durable, exclusive patents, no need to be fully maintained with water, and the warranty is 15 years.
Copper-aluminum composite radiator:
The advantages are corrosion resistance, fast heating, fast heat dissipation, high aesthetics, lighter material and long service life; However, it requires a large water pressure and is more suitable for central heating.
Moreover, the current copper and aluminum composite radiators can be selected according to the decoration style of the home, which can not only play a decorative role, but also give you warmth in every cold winter.
Cast iron radiators:
The advantage is that it is cheap and has good corrosion resistance, but the overall performance is not good, and it is not a mainstream product at present, so it is not recommended for friends to choose.
Cast aluminum radiators:
It heats up quickly, has high aesthetics, saves energy and saves materials, but the durability is relatively poor; In general, it is suitable for home use.
-
Advantages of radiators:
1. The heat dissipation is fast and the temperature rises quickly, so you can enjoy the warmth immediately after the room is opened, and you don't have to wait.
2. The cost is cheap and can be installed according to the needs of the room.
3. Save trouble and worry, don't think too much about repair and maintenance, and pay attention to it before and after heating.
4. There is no need to consider home decoration and floor material when installing radiators.
Disadvantages of radiators:
1. If the temperature control system is not installed, the energy consumption will be high if it is used for a long time.
2. The material is abundant, if you do not choose the right material, it is easy to corrode.
No matter what kind of device it is, it has its own advantages and disadvantages, and the key is to see if the family can accept the disadvantages. The above is given to you by the experts of ESI HVAC, I hope it will be helpful to you.
-
What are the advantages and disadvantages of choosing radiators for home heating.
-
Floor heating belongs to radiant heat dissipation, laying pipes under the indoor floor, and then using water as the medium to circulate heating the ground surface, which is to turn the ground into a heat dissipation surface. The air has the characteristics of "cold, light, hot and heavy", and the air heated by the floor naturally moves the whole room from below, so that the circulation reaches a temperature ladder and reduces ineffective losses. Its advantages are 1. Comfortable, hygienic, health care, ground radiant heating is the most comfortable heating method, giving people the feeling of warming their feet and drying their heads; It is not easy to cause polluted air convection, improves blood circulation and promotes metabolism.
2.Save space and beautify the living room, save radiators, brackets and other positions, increase the usable area, facilitate decoration and home layout, and reduce sanitary dead ends. 3.
Good thermal stability, large heat storage on the ground layer and concrete layer, good thermal stability, and slow indoor temperature during intermittent heating. 4.The service life is long, basically the same life as the building, and the general pipeline is reported to be 50 years.
The fly in the ointment lies in 1, occupying a layer height of 3-8 cm (according to different insulation materials, different pipes, different paving processes, different floor heights) It is not recommended to install floor heating below the floor height. 2.There are some limitations on the floor, and it is necessary to choose the "four" good requirements of good conduction performance, good thermal stability performance, good enveloping performance and anti-change shape.
3.There are some disadvantages to bathroom heating, waterproof considerations, as well as toilets, basins, sewers, inconvenient pipes, so the temperature is limited. 4.
It is not suitable for secondary decoration, and the system pipelines are all hidden under the ground, which is inconvenient to disassemble and replace, and if the ground needs to be used for secondary decoration, all need to be removed. The radiator is circulated by convection of surface air, so that the room heats up quickly. 1. The temperature rises rapidly, and the air is heated directly through water circulation without passing through the ground material, and the heating is fast.
2. There is no requirement for floor materials, and you can choose your favorite ground materials as you like. 3. Do not occupy the height of the floor, give enough height. Cons:
1. Occupy a certain space, and the radiator has a certain volume. 2. The comfort is relatively poor, and the radiator heats up quickly, so the comfort is relatively insufficient, but the floor is relatively warm.
The installation of kitchen radiators, in terms of material, the kitchen is suitable for choosing steel or copper-aluminum composite radiators, the choice of these two types is for heating considerations, they have a large amount of heat dissipation, rapid heating, open 15 minutes before entering, and when they enter, it is already warm like spring, which will not make people wait too long and avoid the pain of freezing; Second, because the kitchen is full of smoke and dust, the items placed in it are easy to accumulate dust, and it will be difficult to clean up if it is too late to clean for a long time, which requires the radiator installed in it to have a smooth surface and easy to clean and take care of. Among the many product types, steel and copper-aluminum composite meet the above requirements and are deeply loved by users.
It is possible that the reason for the small water pipe is that the water circulation is slow and the heating is not hot, the first group of heat is the front end of the water inlet and the second group of heat at the end will definitely be lower, you can change the pipe to a thicker point to accelerate the water flow and increase the heat.
You can use a semi-dry rag to wipe off the blackened part of the wall, if the radiator is used for too long, it is difficult to wipe off with a wet rag, you can use sandpaper to rub it after the heating period is over, scrape off the original blackened surface, and then repair it with paint.
What are the advantages of radiator heating?
Compared with traditional cast iron radiators, the advantages of insert radiators are not only aesthetically pleasing: >>>More
Close the return valve. Before cleaning, in order to ensure safety, be sure to turn off all the return valves, and then use a wrench to gently unscrew the plug on one side of the radiator by hand. Here is a warm reminder for everyone: >>>More