The hardware of household cabinets is easy to rust, how to maintain it?

These two types of routine maintenance are OK, and they can be replaced if they are broken. If you want to be durable or an imported brand is more reliable, you get what you pay for, and things that are both cheap and good do not exist. Higold (founded in 1989, is a collection of whole house custom hardware, intelligent hardware, e-commerce in one of the related diversified innovative technology enterprises).

<> insert into the gap, there will be loose at this time, use a wire cutter to clamp the screw and take it out, and the rest will be easy after taking out one or two, and then replace it with a stainless steel hinge of the same specification. Hinge rust from the quality of the product, is an inferior product, since the rust, you have no point in removing the rust, so my suggestion is to replace it directly! Cabinet door screws are always off, I think it is because the material is not good, and the material here can be divided into two kinds, one is the material of the door panel, the other is the material of the hardware, if there is no problem with these two materials, the cabinet door panel is mainly divided into blister door panels, solid wood door panels, double veneer door panels, painted door panels and acrylic door panels according to the material.

If the screw hole is cracked or notched, it is recommended to replace the hinge installation position, find a carpenter master, re-open the door and fix it with screws.

Whether the drawer can be pushed and pulled freely, and how much it can bear weight, all depend on the support of the slide rail. Add lubricating oil regularly, dry it with a dry soft cloth if it gets wet, and check whether there are fine particles on the slide rail from time to time to avoid damaging the slide rail. The hardware of our household hardware cabinets, after a long period of use, may appear loose fixing screws, which requires us to regularly check and tighten these screws to prevent this situation, if this situation occurs.

It is best to cut the fir wood into the size of a screw wire with a blade in the place where there is a hole above, put white wood glue into the hole, and then insert it into the hole, cut off the excess with a blade, and the same method with a hole below, it is also best to put some sawdust in the hole.

You can wipe off the water vapor with a towel frequently, and you can also wax the hardware to isolate the air to prevent them from oxidizing and rusting.

If conditions permit, try to use stainless steel materials and parts; In addition, when cleaning, remember to use a dry rag to absorb the moisture after wiping the cabinet with a damp rag, which can prevent the parts from rusting quickly.

If the cabinets at home are made of hardware, then pay attention to wipe them clean after use and do not leave water mist on them, keep them dry, and you can also use protective materials to wrap them.

How to prevent rust in cabinet hardware, cabinets are very practical, and in order to facilitate people to use cabinets well, they also need to match some hardware accessories on the cabinets, but after a long time, hardware will inevitably rust, Let's take a look at how to prevent rust in cabinet hardware.

Practical methods for anti-rust maintenance of cabinet hardware

1. The place where there is water stain in the cabinet hardware accessories should be wiped dry in time to avoid rust in the cabinet hardware accessories.

2。The hinges and drawer slides of the cabinets should be oiled frequently to keep the opening and closing drawers smooth.

3. If you want to put the pots and pans in the cabinet, you should dry or dry them first to avoid water droplets from directly contacting the hardware of the kitchenware cabinet, so as to prolong the service life of the hardware.

4. When opening and closing the drawer, avoid excessive force to prevent the slide rail from falling out or being impacted, and be sure to develop good usage habits during use.

5. Because it is inevitable to encounter some salt and oil substances in the kitchen, it is necessary to avoid salt, sugar, soy sauce, vinegar and other condiments directly poured on the hardware in the process of using kitchen hardware.

6. For large hardware such as high rising blue and turning blue, pay attention to its rotation and stretching direction, and avoid using dead force.

7. The door hinge should be oiled on time to keep the switch free and prevent rust due to moisture.

8. It is best not to hang things on the handle of the cabinet, especially some heavy or wet things, if the handle is loose, you can use a screwdriver to screw the back of the door panel.

9. When the cabinet door panel is not neat or a little loose, the hinge can be adjusted, and the hinge used on the market can generally be adjusted in three dimensions.

First: the hinges are cabinetry'Heart

After a long time, the cabinet door has become disobedient and is always closed tightly, are you crazy at this time? In fact, it is to warn you to protect well"Heart"It's time. The hinge is the connection point between the cabinet and the cabinet door, and it is used the most frequently, so the quality of the hinge is the most important thing that cannot be ignored.

When maintaining, wipe gently with a dry soft cloth, never wash with acidic detergent, and wipe with a little kerosene if there are black spots. After using it for a period of time, it starts to make a sound, and you can add some lubricating oil for maintenance.

Second: the slide is the kidney

When you are in a hurry to pick up something, but the contents of the drawer are so numerous and heavy, opening the drawer becomes torture. At this time, you have to fix it"Kidneys"Finish. If you want to cook quickly, the drawer is smooth and easy to pull all thanks to the support of the slide rail.

Like the hinge, the slide rail should not be deterred with acidic detergents, and there is an audible signal and some lubricating oil; Also, don't put anything too heavy. Once the drawer is found to be loose, the screws should be tightened in time, although the slide rail has a proper torque in the transverse direction, try not to pull the drawer laterally to avoid bending of the track and wear of the internal pulley.

Step 3: Pull the basket

Pots and pans, bottles and cans often have to be messed up with each other, and this kind of trouble can only be solved by pulling the basket.

Try to tighten the bottles and cans such as oil, salt, sauce and vinegar, and do not push and pull to the side.

Moreover, it is easier to hide dirt and dirt at the intersection of the iron bar of the basket, so clean it in time to avoid corrosion and bacterial breeding; When cleaning, try not to rub with hard objects such as steel wool balls, and avoid acidic detergents.

Hinge maintenance: keep the cabinet dry, avoid hinges and other hardware in humid air; Every 2-3 months, you can add some lubricating oil regularly and wipe it gently with a dry soft cloth; If you find black spots on the surface that are difficult to remove, you can wipe them with a little kerosene and do not clean them with detergents or acidic liquids containing chemicals.

Slide rail maintenance: add lubricating oil regularly, and wipe dry with a dry soft cloth if it gets wet; Check whether there are fine particles on the slide rail from time to time, and clean them up in time to avoid damage to the slide rail.

Handle maintenance: Check the tightness of the screws regularly, and replace them with new ones if the screws fall. Be careful not to put wet towels or anything like on the handles, wooden handles tend to get wet, and iron or copper handles tend to rust and peel off.

The maintenance method of these hardware is very simple, apply anti-oxidation paint or apply a layer of wax directly.

To maintain such hardware, you can go to a professional store to buy that kind of maintenance agent, or wipe it more when you usually take care of it, which can also strengthen its use rate.

The hardware of the cabinet is an important accessory that makes up the cabinet, and without these hardware, the cabinet will not be used. You know? The hardware of the cabinet also needs to be maintained, and the cabinet can be used longer after maintenance. Next, let me tell you how to maintain cabinet hardware!

1. Hinge maintenance.

The hinge is a necessary hardware for the cabinet body and the door panel to be opened and closed repeatedly. Since the opening frequency of the door panel is the highest during use, the quality of the hinges is particularly important. Keep the inside of the cabinet dry and avoid hinges and other hardware in humid air; Every 2-3 months, you can add some lubricating oil regularly and wipe it gently with a dry soft cloth; If you find black spots on the surface that are difficult to remove, you can wipe them with a little kerosene and do not clean them with detergents or acidic liquids containing chemicals.

2. Slide rail maintenance.

If the hinge is the heart of the cupboard, then the slide is the kidney. Whether the large and small drawers can be pushed and pulled freely and smoothly, and how load-bearing they are, all depend on the support of the slide rails. Add lubricating oil regularly, and wipe dry with a dry soft cloth if it gets wet; Check whether there are fine particles on the slide rail from time to time, and clean it up when the chain is lost, so as not to damage the slide rail.

3. Handle maintenance.

As an auxiliary part of the family cabinet, the handle is made of a variety of materials, such as wood, stainless steel, zinc alloy, iron, aluminum alloy, etc., and a few crystal plastics. Since the handle is often pulled, it is easy to loosen after a long time. Check the tightness of the screws regularly, and replace them with new ones if they fall off.

Be careful not to put wet towels or anything like on the handles, as wooden handles tend to get wet, and iron or copper ones tend to rust and peel off paint.

4. Skirting board maintenance.

The maintenance of the wooden baseboard should pay attention to keeping the cabinet area dry, avoid damage to the baseboard in a humid environment, and regularly wax or apply waterproofing agent for maintenance. The metal baseboard should be protected from scratching by sharp objects, and the PVC baseboard can only be replaced as soon as it cracks.

The above is the maintenance method of cabinet hardware. When buying cabinets, we should pay more attention to the quality of hardware, and at the same time pay attention to the maintenance of hardware, so as to extend the service life of cabinets, have you learned?

Home cabinet hinges, drawer slides and other hardware will rust for a long time This is an inevitable phenomenon, there is no hardware accessories that will never rust, but the time of rust is a long and short problem, to put it bluntly, it is a problem of product quality, so when buying furniture, many consumers will ignore the problem of hardware with excellent parts, but small problems can not be underestimated, hardware accessories are also high and low, and there are more brand Ye Ji Zi.

Wipe with a damp cloth or damp cloth (use a soft, damp sponge or cloth, do not use a cloth with a rough surface) dampened with neutral dish soap or detergent, and finally wipe off the water stains. Wipe the surface clean immediately after using the detergent. Do not leave the detergent on the surface of the product.

In ordinary life, we must pay attention to the maintenance of these hardware, so we must dry the places with water stains in time in ordinary life, and then we must often oil these slides, and at the same time do not use too much force when switching on and off.

Usually when it is stained with water and oil, it is necessary to scrub it in time, you can wrap it in plastic wrap, and try not to touch these things when there is water on your hands.

Try to avoid getting them in the water, and be sure to open the door lightly. In this way, it will be effectively maintained.

1. In the daily maintenance of cabinets, hardware accessories and vegetable washing basins are the focus of cleaning, these places are easy to nourish bacteria, especially in summer, cabinets are more susceptible to bacterial invasion. Therefore, when washing dishes, you should clean these places by the way, do not have stolen goods and stagnant water, and ensure cleanliness and hygiene. Mul.

2. Try not to put stained items directly on the countertop. These chemicals have an aggressive effect on countertops, such as salt, which has a certain corrosive effect on stainless steel countertops, and long-term placement on countertops will cause them to corrode and rust. In addition, it is also necessary to avoid putting oil, salt and vinegar directly on the countertop, if the cabinet countertop is a wood-based panel, the surface should be dried in time after being wet, so as not to penetrate and cause expansion and deformation.

Mul. 3. All the hardware parts on the cabinet should be kept clean and clean, and the places with water stains should be wiped dry in time, and the hinges of the cabinet doors and the slides of the drawers should be oiled frequently to ensure that they can be opened and closed smoothly and are not easy to rust. Try not to hang anything on the handle of the cabinet, especially if it is heavy or wet, if the handle is a little loose, tighten it with a screwdriver. Mul.

The switch of the drawer should not be opened and closed vigorously, otherwise the slide rail is easy to get off the track due to heavy blows, and if the door panel of the cabinet is untidy or loose, the hinge can be adjusted; The large pieces of hardware such as pull baskets and baskets in the cabinet should be opened in the direction of their opening and closing during use, and should not be pushed and pulled with dead force. Mul.

4. The basin made of stainless steel should not be scrubbed with hard objects such as steel wool balls, nor should it be wiped with chemicals, as the use of these things will cause scratches and corrosion on the surface of the sink. You can use a towel or a soft cloth and wash with a mild detergent after wetting your hands. Mul.

5. As for the washing basin of other materials, it can be washed with detergent or soapy water to keep it clean while removing the greasy oil. Of course, be careful not to scrub hard items as much as possible. At the same time, it should be noted that when cleaning the vegetable washing basin, the neck end of the pipe behind the filter box of the basin should also be cleaned to ensure that it is clean and free of grease. Mul.

Stainless steel cabinets can be understood as cabinets made of stainless steel. Stainless steel is the abbreviation of stainless acid resistant steel, which is resistant to air, steam, weak corrosive media such as air or steel. Stainless steel has weldability, corrosion resistance, polishing performance, heat resistance, and strong hardness, which makes stainless steel have a lot of room for utilization.

Nothing can be perfect, there will definitely be some shortcomings of its own, the same is true for stainless steel cabinets, although it has many advantages, but there are still some shortcomings, such as the countertop of stainless steel cabinets once scratched by sharp objects will leave irreparable traces. Moreover, the countertop of many stainless steel cabinets is prone to oxidation, resulting in rust and other conditions. Stainless steel is a very thin and finely identified stable protective film formed on its surface, once this film is damaged, the oxygen atoms in the air or liquid will continue to precipitate out, forming loose iron oxide, and the metal surface will be constantly corroded.

Therefore, in the process of use, regular cleaning and maintenance must be carried out to maintain its gorgeous surface and prolong its service life.

When cleaning the surface of stainless steel, care must be taken not to scratch the surface, so do not touch the surface with sharp objects, and do not use hard steel wool balls, grinding tools, blades, etc. When cutting vegetables on the stainless steel countertop, put on a cutting board to prevent knife marks on the countertop. If there are knife marks on the stainless steel countertop, it is easy to accumulate bacteria in the knife marks, and in the long run, the knife marks will also cause rust due to water and other factors, which is not good.

When cleaning stainless steel cabinets, do not wash stainless steel countertops with strong alkaline or oxidizing chemicals, such as soda, bleaching powder, sodium hypochlorite, etc., so as not to corrode the stainless steel surface. In kitchen life, try to avoid putting oil, salt, sauce and vinegar directly on the stainless steel countertop, because these chemicals will bring a certain corrosive effect to the countertop, such as salt will cause the stainless steel countertop to rust.