How to distinguish the hinges of cabinets from good and bad, and what brand of hinges are good for w

1. Observation. From the outside, it is difficult to distinguish between high-quality hinges and low-quality hinges. The only distinction is to observe its thickness, inferior hinges are generally welded with thin iron sheets, almost no resilience, and will lose elasticity after a long time, resulting in cabinet doors not being closed tightly, which greatly affects the function.

The beautiful hinge is made of alloy stamping and forming, which feels thick and smooth in appearance, and is stable and strong due to the thick coating on the surface, which is not easy to rust and has strong load-bearing capacity. Mul.

2. Pull the bar. The hinges with different advantages and disadvantages feel different, and the hinges with excellent quality are softer when opening the cabinet door, and will automatically rebound when closed to 15 degrees, and the resilience is very uniform. Inferior hinges have a short service life and are easy to fall off, such as cabinet doors and hanging cabinets falling off, all because of the poor quality of the hinges.

Mul. 3. Test it. If the screws of the hinge are not good, there will be frequent errors in use, such as the tail screw slippage, which will cause the door to separate from the cabinet body. Usually you want to make sure that the screws can stand the test, you can take a screwdriver, try the adjustment screws of the hinge and the fastening screws at the end of the hinge a few times, to see if it is easy to slip teeth, if it is easy, you should pay attention.

See if the threads of the screws are clear, generally poor screws have poor workmanship and materials, and the threads are scattered.

The hinges of Jufan brand are very good and durable.

Spring hinges are mainly used for cabinet doors and wardrobe doors, and it generally requires a board thickness of 18-20mm. In terms of material, it can be divided into: galvanized iron, zinc alloy. In terms of performance, it can be divided into: need to make a hole and no need to make a hole.

No need to make a hole is what is called a bridge hinge. The bridge hinge looks like a bridge, so it is commonly known as the bridge hinge. It is characterized by the fact that it does not require drilling holes in the door panel and is not limited by style.

Available in small, medium, and large sizes. It is necessary to make holes, that is, spring hinges that are commonly used on cabinet doors. Its characteristics: the door panel must be punched, the style of the door is limited by the hinge, the door will not be blown open by the wind after closing, and there is no need to install various bumpers.

Common classifications:

1. According to the type of base, it can be divided into two types: detachable type and fixed type;

2. According to the type of arm, it can be divided into: slide-in type and card type;

3. According to the position of the door panel, it is divided into a full cover (straight bend, straight arm) general cover of 18 centi, a half cover (middle bend, curved arm) cover of 9 centi, and the hidden (big bend, big curve) door panel is all hidden inside;

4. According to the style of hinge development stage, it is divided into: one-stage force hinge, two-stage force hinge, hydraulic buffer hinge, touch self-opening hinge, etc.;

5. According to the opening angle of the hinge: 95-110 degrees are generally used, and special ones are 25 degrees, 30 degrees, 45 degrees, 135 degrees, 165 degrees, 180 degrees, etc.

1. Look at the material: Almost all of the cabinets of big brands such as Zhongzhixin hardware use cold-rolled steel, which is stamped and formed at one time, with a thick feel and a smooth surface. Moreover, due to the thick surface plating, it is not easy to rust, strong and durable, with strong load-bearing capacity, and the cabinet door can be stretched freely, so there will be no situation where the door is not closed tightly.

The inferior hinge is generally welded with thin iron sheet, which has almost no resilience, and will lose its elasticity after a long time, resulting in the cabinet door not being closed tightly, or even cracking. 2. By feel: the hinge with different advantages and disadvantages has different feels, and the hinge with excellent quality is softer when the cabinet door is opened, and it will automatically rebound when it is closed to 15 degrees, and the rebound force is very uniform.

Inferior hinges have a short service life and are easy to fall off, such as cabinet doors and hanging cabinets falling down, which is mostly caused by poor hinge quality.

Cabinet doorsOn the hinges may seem inconspicuous ifDoor hingesIf you don't give force, then the cabinet door will strike every three or five times, and the cabinet door is safflower, then the door hinge is a green leaf, which sets off the cabinet door. When choosing a cabinet door hinge, don't just look at the brand, but also look at whether its size is appropriate, and you should also know the adjustment method of the door hinge

The steel used to make the hinges is very important, if you don't choose it well, after a period of time, the door panel may lean forward and backward, and the shoulders will fall off. Almost all of the cabinet hardware of the big brands use cold-rolled steel, which is perfect in thickness and toughness.

Try to choose hinges with multi-point positioning. The so-called multi-point positioning means that the door panel can stay at any corner when it is opened, and it will not be effortless to open, nor will it close suddenly, so as to ensure the safety of use, which is particularly important for the lift-up hanging cabinet door. The quality of positioning is related to the toughness of the reed used in the hardware, and the quality of the reed also determines the opening angle of the door seepage plate, and the quality of the reed can make the opening angle exceed 90 degrees.

The cabinet door hinge has excellent performance, its steel thickness, flexibility, good corrosion resistance, high base, long arm, free positioning without displacement, free opening and closing when in use, no noise, can withstand tens of thousands of times of opening and closing without deformation and damage. Such as the German "Hettich" fast-release hinge. In the destructive experiment, the door at a distance of 10 cm from the hinge is loaded with a weight of 5 kg, opened and closed for 3 seconds, and the opening life can reach 80,000 times.

This cabinet door hinge can disassemble the cabinet door panel itself without any tools, and it can be quickly restored to ensure that it is the same as before disassembly.

Practice has proved that according to the nature of the use of the cabinet and the accuracy of the arrangement of the cabinet door, coupled with the weight of the cabinet door itself, it is difficult for the hinges of various domestic cabinet doors to meet the necessary quality requirements of the cabinets, so there are often cases of leaning forward and closing and the door seam is too large.

To be honest, the hinge of the same type is indeed better than Gut's, and the plating, materials, weight, and workmanship are all better than Gut, but there is no way to do it. However, Gute is also the most cost-effective hardware in China, cheaper than **, and the quality is much better than those miscellaneous brands.

Summary. Hello dear <>

Cabinet doors are good with frames. Framed cabinet doors have several advantages in addition to being easy to installThe 304 hinge used in the frame cabinet door is not easy to rust, and the characteristic of this hinge is that it will not rust, and it is not much more convenient than the cabinet door that needs to replace the hinge in 4-5 years.

Strong compression resistance frame cabinet door due to the blessing of the outer frame, full of pressure resistance, after testing, framed cabinet door can withstand hundreds of pounds of weight, it is conceivable that this cabinet door is a piece of cake for ordinary kitchens. <>

Is it better to hinge or frame the cabinet door.

Hello dear <>

Cabinet doors are good with frames. Framed cabinet doors have several advantages in addition to being easy to installThe 304 hinge used in the frame cabinet door is not easy to rust, and the characteristic of this hinge is that it will not rust, and it is not much more convenient than the cabinet door that needs to replace the hinge in 4-5 years.

Strong compression resistance framed cabinet door due to the blessing of the outer frame, full of compressive ability, by the state silver through the test book, framed cabinet door can bear hundreds of pounds of weight, can be imagined and fight to accompany, this kind of cabinet door is naturally a piece of cake for ordinary kitchens. <>

Data Extension Ridge: A cabinet door is a door above a cabinet. Cabinet doors are mainly divided into solid wood type, fireproof board type, hydronamine veneer type, blister type, and mold according to the material.

There are ten types of glass door panels for pressing profile, paint type, metal texture type, crystal plate type, wrapping frame type, crystal plate, aluminum alloy door and burning this frame glass door panel. [slightly dismantled and laughed] <>