What does a Corolla oil pump fuse look like?

Updated on Car 2024-07-27
6 answers
  1. Anonymous users2024-02-13

    The Corolla oil pump does not have a separate fuse, only a relay fuse, which is blue.

    Its location: After the main driver opens the door, there is a board on the side of the instrument, and the board is unscrewed with a screwdriver, and inside is the fuse box, and the fuse is in it.

    The role of the gasoline pump is to suck the gasoline out of the tank and pressure it through the line and the gasoline filter into the float chamber of the carburetor. It is thanks to the petrol pump that the petrol tank can be placed in the rear of the car, away from the engine, and below the engine.

    Relay (English name: relay) is an electrical control device, which is an electrical appliance that makes a predetermined step change of the controlled quantity in the electrical output circuit when the change of the input quantity (excitation quantity) reaches the specified requirements. It has an interactive relationship between the control system (also known as the input loop) and the controlled system (also known as the output loop).

    Usually used in the control circuit of automation, it is actually a kind of "automatic switch" that uses a small current to control the operation of a large current. Therefore, it plays the role of automatic adjustment, safety protection, and conversion circuit in the circuit.

  2. Anonymous users2024-02-12

    The wiring is similar to that of Sidi, but the door lock circuit is different, the oil pump does not have a separate insurance, there is only one relay, in the left front instrument fuse box, the blue one.

  3. Anonymous users2024-02-11

    Open the fuse and follow the distribution map to find it.

  4. Anonymous users2024-02-10

    The Corolla cigarette lighter fuse is inside the storage compartment on the lower left side of the steering wheel and needs to be removed to be visible. When replacing the fuse, open the auxiliary storage compartment first. Push the sides of the secondary storage compartment inward to disengage the upper jaws. Pull out the auxiliary storage compartment and disengage the lower jaws.

    The Corolla cigarette lighter fuse is in position 7, and it is not necessary to pull the fuse directly by hand to remove the fuse. Each fuse box is equipped with tweezers to allow the fuse to be removed. Tweezers can be used at both ends to remove both large and small fuses.

    Use the extraction tool to remove the fuse and replace it with a new one.

    Cigarette lighters use high-power appliances. Cigarette lighter fuses are extremely easy to blow. Generally, cigarette lighters use 15-25A fuses.

    Since the vehicle voltage is 12V, it is recommended that the electrical appliances connected to the cigarette lighter should not exceed 300W, and some small cars should not exceed 200W. As for high-power electrical appliances such as car refrigerators and car inflatable pumps, it is better to use less cigarette lighters to get electricity.

  5. Anonymous users2024-02-09

    It's like the one above the customer's engine cover, there's a fuse box.

  6. Anonymous users2024-02-08

    The fuse is inside a small box under the steering wheel.

Related questions
8 answers2024-07-27

You don't need to row it, just change it and twist the key a few more times to ignite it [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

10 answers2024-07-27

The engine does not catch fire and is one of the most common faults in cars. There are two situations when the ignition is not ignited: one is that the starter can be heard, but the engine cannot start. >>>More

12 answers2024-07-27

Air conditioning is installedFuses >>>More

16 answers2024-07-27

Open the front cabin cover of the Corolla, you will find that the buckle fixed on the upper part, there are a total of 4, we take out the small word change cone, use the small word change cone to gently pry off the upper fixed buckle one by one, and the buckle taken off should be put away for installation. Take out the Phillips cone and remove the left and right screws. In addition, it can be seen that the two-day-old screws need to take out the small wheel, match the black rod adaptor, and add the No. 10 sleeve to remove these two screws. >>>More

10 answers2024-07-27

The location of the car's fuse box.

Generally, there are two fuse boxes on the car, one is responsible for the safety of the external electrical appliances of the car, such as the safety protection of ECU, glass water, lights, horns, ABS and other circuits, which is located in the engine compartment; The other one is responsible for the normal operation of the electrical appliances in the car, such as cigarette lighters, window lifts, power seats and airbags, etc., which are generally located on the left side of the steering wheel. For example, when I connected the ACC power cord before, I needed to disassemble and assemble the fuse box in the car. >>>More