How do you remove a Toyota Corolla bumper?

Open the front cabin cover of the Corolla, you will find that the buckle fixed on the upper part, there are a total of 4, we take out the small word change cone, use the small word change cone to gently pry off the upper fixed buckle one by one, and the buckle taken off should be put away for installation. Take out the Phillips cone and remove the left and right screws. In addition, it can be seen that the two-day-old screws need to take out the small wheel, match the black rod adaptor, and add the No. 10 sleeve to remove these two screws.

Take out the Phillips cone and use the Phillips cone to remove the screws fixed to the left and right sides of the front bumper, with four screws on each side. Take out the black rod of the adaptor, match the No. 10 sleeve, and remove the fixing screws on the lower part of the front bumper, and there are a total of 5 screws in the lower part. Once the fixing screws are removed, hold both sides of the front bumper with your hands and gently break them out with your hands so that the front bumper is separated from the body.

Pull out the fog lamp harness plugs on the left and right sides, and the front bumper can be completely removed.

Remove the connecting buckle of the front bumper upper decorative plate and the front bumper sub-assembly;

Remove the connecting bolts of the front fender and the liner and the front bumper sub-assembly;

Remove the connecting nut of the front bumper embedded bracket with the front cross member of the engine compartment;

Unplug the front fog lights, then remove the front bumper assembly from the car, and remove the front fog lights;

Remove the energy absorbing block from the front bumper.

3. Installation. Install the front bumper energy absorbing block into the front bumper, and then install the front fog lights to the front bumper;

Insert the front fog lamp harness plug into the holder;

The front bumper sub-assembly embedded bracket is loaded into the engine compartment front cross member, which is fixed with a nut;

Bolts and self-tapping screws are used to connect the front fender and liner to the front bumper sub-assembly;

fastening the fixing nut of the front bumper embedded support;

The upper trim plate of the front bumper is fastened to the upper part of the front bumper with a plastic buckle.

As of July 2021, ** is around 800-1500 yuan.

The cost of bumper parts is generally about 1000 yuan. The original bumper is quite expensive, ** twice as high as the analogue, if their own conditions allow, the choice of the original bumper is the best, no matter which one to buy, must be purchased in a regular channel.

The second is the cost of working hours, if you go to an ordinary repair shop for replacement, the cost is about 200 yuan. If it is in a 4S store, it is naturally much more expensive, and the working hours are at least 500 or more.

Precautions for the use of car bumpers.

1. Do not arbitrarily load sharp, hard, large area and other objects on the product.

2. It is necessary to strictly limit the load value, length, volume, width, length, etc. of the installation instructions to replace.

3. The guard bar should not be in contact with and soaked in saline-alkali and acidic solutions.

4. It should not be placed in the environment of high temperature, exposure to sun, ultra-low temperature and other environments with a temperature of more than 40 degrees for a long time.

5. When cleaning the guard, avoid using hard objects or wire balls and other cleaning tools that are easy to scratch the guard.

The above content refers to Encyclopedia - Car Bumpers.

A few hundred dollars is about the same, but it's different from place to place. Bumpers are consumables, and almost fine.

Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, for you to find the corresponding problem solutions and solutions! If you change this front bumper with the Toyota Corolla, if you go to this 4S shop to replace the front bumper, you will probably need this 2,000 yuan or so. If you go to this repair shop to replace it, you will probably use the auxiliary factory, which will be about 600 yuan.

Question: Do you have an original one?

Question: It's not original, it's ** produced.

Hello, if you go to the repair shop to replace the bumper painting, the cost is generally about 1200 yuan.

The deputy factory is about 300 yuan, and the original factory is six or seven hundred, which does not include painting and labor hours.

Toyota Corolla to change the front bumper costs about 500 yuan.

According to the price level in January 2020, the original ** of the bumper of the ordinary model below 250,000 yuan ranges from 1,000 yuan to 4,000 yuan, and if you go to the 4S store to replace it, you have to pay 300-800 yuan for working hours, and if it is a luxury car bumper, it will be more expensive.

The cost of bumper parts, choose the bumper produced by the auxiliary factory, ** is generally about 1000 yuan. The original bumper is quite expensive, and it is possible that it is twice as high as the analogue. As for how to choose, if your own conditions allow, it is best to choose the original bumper.

If you go to a general repair shop for replacement, the cost is about 200 yuan. If it is in a 4S store, it is naturally much more expensive, and the working hours are at least 500 yuan or more.

Extended Materials. The role of car bumpers.

Bumpers are used for safety protection, decorating the vehicle, and improving the aerodynamics of the vehicle. From a safety point of view, the car can play a buffering role in the event of a low-speed collision accident to protect the front and rear car bodies; In the event of an accident with a pedestrian, it can play a certain role in protecting pedestrians. From the appearance, it is decorative and has become an important part of the appearance of the car; At the same time, car bumpers also have a certain aerodynamic effect.

At the same time, in order to reduce the injury to the occupants of the car in the event of a side collision accident, the door bumper is usually installed on the car to enhance the anti-collision impact force of the door. This method is practical and simple, and has little change to the body structure, and has been widely promoted.

Please help me if mine is helpful to you! Thank you.

Hello, I'm helping you sort out the answers to your questions, please wait a moment

Hello, I am your exclusive technician, attentive, careful, and dedicated to answering your car questions, and finding corresponding problem solutions and solutions for you! Based on your question, the following analysis was conducted. The analysis scheme is as follows:

Like the Toyota Corolla, if you go to the 4S shop to replace the front and rear bumpers, then plus the painting and installation costs, etc., it can be around 6000, if you go to an outside repair shop to replace, basically within 4000. Solution: If there are no other parts, the normal replacement of the front and rear bars 4S shop is about 6000, and the repair shop is about 4000.

I hope my answer will be helpful to you.

Dear, hello, I'm glad to answer for you, Toyota Corolla for a front bumper** in about 1000 Corolla front bar**There are mainly these kinds, a front blank is 600 yuan, and to replace it in the 4S shop, you have to add 400 yuan of working hours, of course, the 400 yuan also includes the paint cost of this paint and the later installation fee, the old Toyota Corolla, to replace a front bumper, about 700 yuan, it is recommended to go to the 4S shop to replace the original factory, relatively speaking, the quality is better.

Summary. Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, I hope this service can help you. The rear bumper shell of the Corolla, if you replace the original parts in the 4s shop, is 1000 yuan.

If you add the cost of painting and manual disassembly and installation, it is generally a maintenance cost of 1400 1600. If it is in an ordinary repair shop, that is, an auto repair shop to replace brand parts, the maintenance cost is generally 1000 1200 maintenance costs.

How much is the Corolla rear bumper shell.

Hello, don't click to end, I'm textual to give you the full answer, 2-3 minutes.

Hello! Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, I hope this service can help you. The rear bumper shell of the Corolla, if you replace the original parts in the 4s shop, is 1000 yuan.

If you add the cost of painting and manual disassembly and installation, it is generally a maintenance cost of 1400 1600. If it is in an ordinary repair shop, that is, an auto repair shop to replace brand parts, the maintenance cost is generally 1000 1200 maintenance costs.

If you have the original accessories, the accessories are 1000 yuan, and if you add painting, it is generally 1400 1600.

I'm a 19-21 Corolla for a rear bumper.

The rear bumper parts of this car should be about 1100 plus painting, and the labor cost is generally about 1500.

According to the market in September 2020**, the Toyota Corolla front bumper 4S shop generally costs about 1500 yuan when processing outside 1100, and the price of 4S stores in various regions is different, but if you use accessories from the analogues in the repair shop outside, it will be cheaper.

The rear bumper is slightly cheaper, and the rear bumper costs about 1,300 yuan when it is processed at 900 yuan. Bumpers are the easiest to scratch in everyday driving, and installing corner rubber can reduce damage to the corners of the bumper.

Toyota Corolla 19 change the front bumper of the original factory insurance - is 900 yuan The paint is 600 If you buy a side factory outside, it is much cheaper.

It depends on what you are changing, the 4S shop costs more than 1,000 yuan, and the general repair shop can cost a few hundred yuan. The charges are different.

Toyota Corolla 19, how much does it cost to change the front bumper? It's about 1,000 yuan.