Do the white walls made by the developer need to be removed? Why?

Do the white walls made by the developer need to be removed? Why? The white walls made by the developer need to be shoveled off.

When decorating the wall, it is necessary to shovel the wall putty made by the developer, and then decorate the wall according to the process order.

The new house decoration shovels off the putty on the wall, and the putty scraped on the wall of the developer only plays the acceptance of the relevant departments, and the most ordinary putty is used, everyone knows that ordinary putty is not waterproof, and if the water is accidentally splashed on the wall, the putty will flow down the water, revealing the original color of the wall. If you accidentally touch the wall, it will be stained with white.

powder, because the developer is not finely decorated, the walls are scraped putty.

Previously, no primer was brushed. In this case, if you don't shovel off the putty on the original wall, ordinary putty will quickly peel, crack, and fall off.

When the owner gets the key to fine decoration, shovel off the putty on the wall, because the putty layer on the wall is relatively thin and not easy to shovel off, and the putty on the wall is deep and the cement mortar.

The layer is easy to be damaged to varying degrees, adding a lot of difficulty to the next decoration, the wall putty is particularly time-consuming, the cost of shoveling putty is relatively high, after the wall putty is shoveled clean, the indoor is cleaned up, the dust on the wall is cleaned up, and the wall is decorated in accordance with the process order.

Wall fixing glue, 108 glue, boundary area replacement products.

Wall fixing glue, good wettability, high adhesion, effectively fill the cracks and gaps on the wall, and scrape water-resistant putty for follow-up.

It has a strong adhesion. The wall fixing glue needs to be brushed three times, the first time is dry, and the second time can be brushed, and the wall fixing glue is completely dry three times, and the next procedure can be carried out. The advantages of wall brush fixing glue to avoid new cracks at the original cracks after the wall decoration, the wall fixing glue chooses the brand, the bonding strength is high, the wall is better protected, and the ideal wall decoration is the underlying material.

Next, the wall can be scraped putty. The wall needs to be scraped three times putty, the first putty evenly smooths the wall, the previous putty is completely dry, in order to scrape the putty after the first time, the first putty has not dried thoroughly, the next procedure, the putty is easy to bulge, cracks, fall off and other situations, it is very important to decorate the wall in accordance with the process order. The putty is completely dry three times, and the wall is sanded with fine sandpaper, and the water-resistant putty has a good density, and it feels that the wall is already very smooth, but this is not the case at all.

The wall putty needs to be sanded and leveled before the next procedure can be carried out.

It is recommended to use 821 water-resistant putty on the wall, there are many kinds of water-resistant putty in the building materials market, go more, see more, ask more about shopping around and then make a decision, ** business, specialty stores, wholesale and retail. The wall scraping water-resistant putty cures well, is insoluble in water, and the wall can be scrubbed clean with clean water if it is dirty, even if the humid environment will not be affected in any way. Green environmental protection, quality through the system certification, wall paint ideal base material.

There is no need to remove it, because the white strip made by the developer is also more exquisite, but if you want to decorate, you can make a decision according to the actual situation.

It doesn't need to be removed, because it doesn't have any impact on the overall design of the house.

They need to be removed because they are not very good and are prone to problems after a long time and need to be re-brushed.

The renovation foreman explained how the developer's white wall needs to be eradicated, hoping to help you in decoration.

The white walls made by the developer need to be removed because they are not strong. Some developers are still good, and the quality of the walls they make is also good, and they can be kept and used. Blindly following the trend of shoveling the wall skin is not only a waste of money, but also a waste of resources, delaying the decoration period, which is really unnecessary.

Sweep the wall with a broom, if the powder is obvious, it means that it is not water-resistant putty, the adhesion is poor, and this putty must be removed and redone. Pour a stream of water into the wall. If the water doesn't flow downstream, it will quickly penetrate into the putty.

If you gently rub the wall with your hands, there will be obvious loosening, indicating that it is not waterproof putty, and this putty must be removed.

1.Generally, the quality of putty made by developers is average, and it is easy to crack and hollow after decoration. Therefore, most owners choose to shovel it to avoid problems in the future.

But some developers can still do it. Can be treated as putty. The individual needs of the ownersMany owners need not only white walls, but also wood veneer or marble and diatom mud.

Wait. , so it will be shoveled out and reprocessed. It should be noted that the wall should be soaked frequently, and it should be completely removed when eradicated. For putty powder without **.

In the later stage, it can be sanded off with a grinder, and the wall can not leave residual putty powder.

2.The interior white wall of the house is the final acceptance standard, and it is also the owner's inspection of the house, checking the wall for cracks, water seepage, and finding equality problems, so that the developer has the obligation to maintain it until it reaches the standard. Whether the white wall meets the basic standards of the owner's own decoration depends on the decoration materials of the decoration design.

The new wall is added to the same wall. When splicing the old and new walls, it is necessary to remove the paint and putty of the old walls before the masonry of the new walls, so as to ensure that the final finished surface of the new walls and the old walls remains flat and will not crack in the future.

3.It's best to use a shovel if you can, and a key if you can't. If the shovel on the wall that has been soaked in water is easy to shovel to the end, then this one has no retained value, and it will fall off casually in the future.

If you can only make a mark, but not to the end, the wall that is crossed will not fall off badly, then it is still strong. The above is the answer to the question of whether the white wall made by the developer needs to be removed and why.

The white walls made by the developer need to be removed; This is because the developer's white walls are generally of very poor quality, and they have not done waterproof and moisture-proof work, so they need to be removed and then repainted after doing the moisture-proof and waterproof work.

It needs to be removed; Because the white wall made by the developer, its strength is very low, and it is easy to fall off by itself after encountering water, and the stability of the wall skin of the house in the later stage of the future, so the white wall made by the developer should be removed as much as possible.

It depends on the structure of the house, and it can be removed if it is not useful. Because some white walls have no supporting effect, they can be removed at will, depending on the structural steps of the house.

Pay attention to the conditions of delivery, and leave the rest to the decoration master.

Precautions: 1 Check all sockets Friends who don't have a pen can take a charger and a three-phase connector socket. The charger can check the two-phase socket, and the three-phase connector can check the three-phase socket.

2 Check all windows Check the glass: The glass can't have scars, every piece we buy is a commodity, we must check it carefully, otherwise it is ourselves who suffer. Don't think it doesn't matter if there's a small scar on that big piece of glass, think about if you're buying a mirror, you definitely don't want a mirror with a scar.

Check the window screensMany of the window screens are torn or have large scratches on them. Check whether the window touches the wall when it is opened, and the wall is easy to destroy.

3 Check the ** line, the ** line of the broadband interface and the broadband panel are not of good quality, and it depends on whether they are fixed firmly! 4 Check whether the radiators and balcony guardrails are firm.

5 Check every light and switch.

6 Check every faucet.

7.In judicial practice, if the buyer does not raise any objection when receiving the house, it will be deemed that the buyer has waived the right to dispute the area.

8.Pay attention to the window hinges and water pipes, there are many problems. The developer delivers the house to the buyer, which means taking possession of the house for the buyer.

Let me tell you whether the developer's brushed white needs to be shoveled.

1. The local chalking should first clean the wall, treat the place where the wall is chalked, and brush it with white cement after shoveling, if the wall is very smooth, it will be brushed with paint, and it should be polished after shoveling. 2. The wall is coated with primer, and cannot be painted directly, otherwise the skin is prone to mold bubbles and other conditions in the later stage. 3. The wall is large-scale chalking and clearing, and it is recommended to repair the whole wall, so as to avoid color difference.

Related information: 1. First of all, when the wall is renovated, the wall should be moistened first, so that it is convenient to save some effort when the shovel is answered, and the wall that has been soaked in water is removed until the cement mortar wall or putty layer is exposed.

2. Then the wall is painted with interface agent, and every place must be brushed when painting the interface agent, and it must be painted evenly.

3. When the wall is renovated, some kraft paper tape and white latex will usually be used to paste the cracks on the wall, but it is not guaranteed that it will not crack again. There is also the uneven place of the wall must be leveled, usually the use of plaster will be better is also commonly used, but the uneven place can not exceed the centimeter will be better.

4. But generally light walls and some non-load-bearing walls must be pasted, and some good quality wall cloth and white latex should be selected.