If the blank house is not changed, there are potential safety hazards

Most of the new houses that have just been purchased are rough houses, and each family needs to carry out reasonable decoration of the rough house before they can move in, but many residents will feel very strange when they hear that the rough house is changed to water and electricity, because the water circuit and pipes of the house are connected in common places. So do the rough houses have to be changed to water and electricity? What are the precautions for the renovation of water and electricity in the blank house?

Here's the answer to your questions.

First of all, remember that it is to change the water and electricity, not to replace the lights, sockets, faucets, etc. of the project from the new installation of water and electricity. Change or add sockets and switches, valves, faucets. The circuit basically does not need to be changed, and the waterway is as needed.

Those scrapped original lines and made new ones are basically the sets of decoration companies.

According to the experience of receiving the owner's repair, I summed up that whether it is a line or a waterway, there is a life, in the community where I work, the experience of repairing tells me that when the house is in the year or so, the waterway often has to be repaired along the wall to run the water, and the hot melt pipe seepage in the wall is the majority, most of the owners choose to run the open pipe repair, the line is the same as the waterway, often repair a section of no electricity, basically the end is also to run the bright line, so the first point is nothing more than a long life, just like the car insurance 80,000 kilometers, Don't believe it, I was a taxi driver who scrapped two cars, and as long as I ran to 80,000 kilometers, the car would have problems one after another, and it was very accurate.

So do you have to change the water and electricity of the rough house? In fact, the answer to this question is not fixed, and the owners need to make further decisions according to the specific pattern of household water and electricity.

Generally speaking, after the developer builds the house, it will make the corresponding water circuit setting and connection of the house, in which the materials selected by the developer can meet the requirements of people's living, and the materials are also in line with the requirements of national standards, but the water circuit is not the same to meet the individual needs of each family. If the owner feels that it cannot be satisfied, of course, it is necessary to make further changes in combination with their own decoration design needs.

There are no potential safety hazards if you don't change the water and electricity, change the water and electricity 1: because the original design may not be ideal for your own practicality, 2: the original water pipe may be an open pipe to change to a dark pipe according to your own ideas, and the original circuit direction (socket, switch, etc.) does not match the room you want to arrange.

The water and electricity of the rough room is installed in accordance with the drawings, and it is not necessarily suitable for each family or individual needs, and the quality of the materials or brand styles used by the developer is not necessarily satisfied or liked, some of the installation is very rough, and the house water is only to do the main valve, the electricity is only to do the distribution box, and there is nothing else, which makes the owner re-modify the water and electricity.

As we all know, when developers build houses, they have reserved places for water and electricity so that owners can use them later. So when decorating, can the rough house not be changed with water and electricity? What should we pay attention to when changing the blank house to water and electricity? Let's take a look! Imitation eggplant.

1. Can the rough house not be changed for inspection?

No, the water and electricity should be redesigned during the decoration of the rough house, because the water and electricity design of the rough house is only a simple and rough design, which can not meet the daily needs of the owner, so it is necessary to redesign and transform the water and electricity according to their own needs and the structure of the house, so as not to leave potential safety hazards, so that life is safer, more comfortable, convenient and reasonable.

2. Precautions for waterway transformation.

1. During construction, it is necessary to reduce unnecessary joints in the inner pipes of the wall, and if the ground pipelines cross, the secondary pipe should be installed under the main pipeline, so that the overall water pipe is kept on a horizontal line.

2. After the pipeline is distributed, the pipe should be stuck at the place where the pipe is turned to clamp tightly to prevent it from loosening.

3. Install sewer pipes and floor drains in the place where the water is passed, in which the sewer pipes should be coated with PVC glue and connected to the main sewer pipes, and then wait for a period of time to let it solidify.

4. It is best to use a light and rigid keel for the water pipe. In addition, cement board tiling is the most problematic place, so choose the best cement brick.

3. Precautions for circuit transformation.

1. When carrying out circuit transformation, the nearest lead line should be made point-to-point, so that the line can be smoother for future maintenance, except for special circumstances such as lamp path displacement.

2. The distance between the wall opening and transverse grooves should not exceed 30cm for the load-bearing wall and 50cm for the non-load-bearing wall.

3. The line pipe should be fixed with a metal pipe clamp, and the distance should not be greater than 60cm.

4. Strong and weak wires should be threaded separately. Moreover, the adjacent conduit should be kept at a distance of more than 50 cm, and the angle should be kept at 90 degrees when there is a crossing.

Article summary: Well, the relevant knowledge about whether the rough house can not be changed is introduced here, if you need more information, please continue to pay attention to Qeeka Home, we will have more exciting content in the future.

The water and electricity of the rough room is installed in accordance with the drawings, and it is not necessarily suitable for each family or individual needs, and the quality of the materials or brand styles used by the developer is not necessarily satisfied or liked, some of the installation is very rough, and the house water is only to do the main valve, the electricity is only to do the distribution box, and there is nothing else, which makes the owner re-modify the water and electricity.

In the end, most of my friends followed the advice of the renovation company and chose to rearrange the water and electricity; The reason given is that the water and electricity laid out by the developer are of poor quality and unsafe; So after the delivery of the house to decorate, it is said that the decoration should be re-taken water and electricity, is it necessary? Why? Actually, the answer is not.

When it comes to house decoration, water and electricity renovation is the most important part of home decoration, which is directly related to the comfort of later living. It can last for several years without problems.

However, it does not necessarily meet our individual needs. Whether the water circuit needs to be renovated when the new house is renovated needs to be considered comprehensively in combination with our own decoration needs. I suggest that the following aspects can be used to consider whether changes need to be made to the water circuit.

The amount of work is large, the cost is high, and it is not worth it. In addition, the water circuit of the new house has a two-year warranty, and if there is any problem, you can find the property for maintenance. If it is true that the water circuit materials of the new house are very poor, cannot meet the needs of use, or is not durable, you can go again.

However, it is not recommended to re-go all of them unless necessary.

The second-hand house I bought this year is 125 square meters, and the decoration is a bit old, more than ten years. I was also going to redecorate it at first. But due to the helplessness of life, the decoration has to live in a rented house for a year and a half. The second baby came out again. The baby is small, and the decoration has to remove formaldehyde.

Re-arranging pipes, designed to be the best solution, especially the sewer generally upstairs is relatively low, users in order to lift the high point are made up, and all the sockets have to be replaced, because the developers are cheap, can not be used, so for the sake of safety are replaced with new products, this is the main reason for the re-change Before this problem, let's talk about a practical situation, to this day in many rural areas, the entrance line is only squared, and even aluminum wire. However, it did not prevent the peasant brothers from using high-power electrical appliances such as air conditioners after they became rich.

Very good to do. Most people will choose to remodel during this period, and they can change it according to their preferences.

It's particularly easy to do. As long as we clarify the specific needs and then hire a designer, we can produce design drawings.

It is very easy to do, because the rough house can be modified with water and electricity at will, and you don't have to care about the appearance, it is very easy to do.

It's also great to have a water and electricity renovation, and because the houses are not renovated, they don't need to be a lot of work.

It's easy to do, because there are no tiles yet, just pull on the water pipes, wires, and you're good to go.

<> "1. Does the rough house need to be changed to water and electricity?

If there is a problem with the quality of the previous water and electricity, or the water and electricity wiring does not meet the needs of the owner, there is a deviation, then the water and electricity need to be changed again; If the quality and layout meet the needs of your own stool, there is no need to change the water and electricity again.

Second, what should be paid attention to in the water reform of new houses.

1. When designing the waterway, it is necessary to think about all the equipment about the open burial of water, such as water heaters, water purifiers, toilets, etc., determine their location and installation, and think about whether they need to use gas or electricity in advance, so as to avoid temporary replacement and repeated transformation of the waterway.

2. When the waterway is transformed, the pressure test should be carried out, and the pressure pump "return valve" can be opened when pressurized, so that the loop can be formed, although the pressure pump seems to be working, there is not much pressure in the pipe, especially for the electric pressure pump, more attention should be paid to, if you don't understand, you can ask professionals to help solve it.

3. If you need to close the excess floor drain, you can block the gap in the drainage pipe to avoid overflowing, and the bathroom should be reserved for wash basins, toilets and other water outlets, but also to take one out, so that it will be more convenient to mop the floor in the future.

4. Pay attention to determine the location of the washing machine, the washing machine should consider the noisy ant drain, and try not to use the deep water seal floor drain for the washing machine floor drain, because the launching speed of the deep water seal floor drain cannot meet the demand, which will lead to water overflow.

1. It is best to change the water and electricity of the blank house.

2. When installing water and electricity in the rough house, it is necessary to pay attention to whether the quality of the water pipes and wires installed by the developer meets the needs of the room. For example, in the kitchen part, household appliances will be used more, and the quality of the wires should be seen to see whether they meet the use standards of high-power electrical circuits; In terms of water mill touching pipes, it is necessary to see whether the aluminum-plastic pipes or PPR pipes are qualified products that have been inspected and shipped out of the factory.

3. There are also whether the hot and cold water pipes use different colors to divide the Hu and so on. If these are not qualified, then they should be replaced, but not the water and electricity in the blank room should be replaced, but according to the demand.

In the process of blocking the work of the blank house, the unnecessary joints of the pipe body in the wall should be minimized, the direction and layout of the water supply pipeline should be reasonable, the water pipes should be arranged neatly, the horizontal and vertical should not be obliquely walked, and the intersection part should be connected by a bridge bend.