How should the cabinet in the bathroom be waterproofed?

Moisture-proof film. One way is to make a moisture-proof film, paste a moisture-proof film on the bottom of the wardrobe and the back of the wardrobe, and put the board of the wardrobe.

Do a seal to ensure that moisture and moisture do not affect the board. Activated carbon.

Its own physical property is adsorption, so put a small cloth bag with activated carbon into the wardrobe, which not only prevents the activated carbon from directly touching the clothes, but also effectively adsorbs moisture. After using it for a period of time, the activated carbon can be exposed to the sun and can be recycled, which is very convenient.

For example, using the dehumidification function of an air conditioner, or using a dehumidifier.

When the indoor air is dry, these parts are not susceptible to dampness, blackening and mold. Similarly, in many first-floor or basement houses, some people are worried about dampness and will lay floor tiles.

Even the paving of wall tiles leads to a large amount of water droplets on the surface of the tiles in humid weather, which is more humid. Wardrobe moisture-proof, unless the owner has special requirements, or the back of the cabinet is a bathroom, generally does not do the wall and ground moisture-proof treatment, if the back is for the bathroom, how to do moisture-proof? The walls are coated with a layer of waterproof paint.

Then make cabinets to prevent moisture from penetrating the walls and hurting the cabinets.

Cabinet we can make the cabinet not fall directly to the ground, and use kicking to pave the cabinet below, so that the cabinet is not afraid of moisture. Make sure that the underside is ventilated and dry. A baseboard is used for the bottom of the door panel.

Blocking it directly makes it look more beautiful and practical. Use a sponge or a very thin piece of similar tin foil before installation.

Stick that paper on the bottom and back. The waterproof layer must ensure that there is no gap to ensure that there is no leakage, before the cabinet is installed, the waterproof should be done on the wall, and then the cabinet is installed.

Brush the floor before the ground decoration to increase the moisture-proof treatment. If you can, it's better to do an underfloor heating, southern region.

Electric underfloor heating is available as an option for damp damp repellent in wet weather. It is also possible to lay a moisture-proof film or insulation board to isolate the moisture from the ground before laying the ground. Brush the floor before the ground decoration to increase the moisture-proof treatment.

If you can, it's best to do underfloor heating, and electric underfloor heating can be used in the south to drive away the tide in wet weather. It is also possible to lay a moisture-proof film or insulation board to isolate the moisture from the ground before laying the ground.

Waterproof measures should be taken, and a partition should also be set up when taking a bath, so that there will be no water in the cabinet, and the cabinet must be installed in a relatively high position.

First of all, you can choose a wooden board of waterproof material to make this cabinet, and then apply a waterproof coating on the outside, and then use plastic strips to make a fence, so that you can prevent water ingress.

We can paint a glaze on the cabinet, because then it will be very waterproof, and it can also play a very good role, very good.

Be sure to install a cabinet door, which should be closed at all times, so that it can prevent water from entering, and it can also prevent moisture very well.

Everyone usually uses the bathroom, so the decoration of the bathroom is quite important, and everyone generally chooses to pay attention to the things used in the bathroom after decorating the bathroom, for example, the cabinet used in the bathroom, and because everyone usually leaves a lot of water after using the bathroom. And some cabinets in the bathroom, it will be easy to be who belongs, so when buying a cabinet in the bathroom, we should also consider the waterproof performance of the bathroom and the cabinet, everyone must be curious, want to understand the bathroom waterproof cabinet, the following points can be referred to when decorating.

Bathroom cabinets need to be waterproof and moisture-proof, and the materials available are: solid wood (oak board), stainless steel, marble and PVC waterproofing materials. PVC waterproof material is a chemical material, it is inevitable that harmful substances, belongs to the low-end material, stainless steel material can be waterproof, moisture-proof and rust-proof, with marble countertop, ** will not be too expensive, is a mid-end product in the bathroom cabinet, the bathroom cabinet made of solid wood, made of rubber wood and oak with less water absorption, is a high-end material for making bathroom cabinets.

Waterproofing measures for bathroom furniture.

Magic weapon 1: plate selection is the key.

Box panels account for a large part of bathroom furniture, and if you want to choose good bathroom furniture, the main materials can not be sloppy.

Magic weapon 2: back protection is very important.

In the process of choosing bathroom furniture, consumers must pay attention to the details on the back. The use of double decorative veneer back panel can completely avoid the exposure of the MDF substrate, and water will no longer have the opportunity to enter the board from the back of the cabinet, which is a good helper for water and moisture resistance.

Magic weapon 3: Observe more subtleties.

When choosing bathroom furniture, we must pay attention to the small part of the humanized design, which is the key factor in the success or failure of the purchase of furniture.

Magic weapon 4: The internal space should not be ignored.

After a period of use, the bottom plate under the sink cabinet begins to deform due to the condensation left by the water pipes hidden in the cabinet soaking the furniture at the bottom of the cabinet.

Magic weapon five: the installation process should be in place.

When installing bathroom cabinets, it is often necessary to dig holes in the box board, and the multi-functional edge banding rubber strip can tightly wrap the cutting edge of the board, which plays a better role in waterproof and moisture-proof.

There are many materials for bathroom cabinets, among which wooden bathroom cabinet legs are easy to get wet, and long-term practical use will cause the whole cabinet to deform, so metal can be used as the leg material to support the cabinet body, such as aluminum cabinet legs are very durable and rust-proof.

In addition to the wooden bathroom cabinet, there are many other materials, considering that the bathroom environment is humid, it is recommended that you choose a bathroom cabinet made of waterproof materials. Composite boards such as fireproof boards, wear-resistant boards, and polymer polymers are used as counter materials, which not only have good moisture-resistance, but also have the color of solid wood, so as to achieve a real effect.

There are many materials for bathroom cabinets, among which wooden bathroom cabinet legs are easy to get wet, and long-term practical use will cause the whole cabinet to deform, so metal can be used as the leg material to support the cabinet body, such as aluminum cabinet legs are very durable and rust-proof.

In addition to the wooden bathroom cabinet, there are many other materials, considering that the bathroom environment is humid, it is recommended that you choose a bathroom cabinet made of waterproof materials. Composite boards such as fireproof boards, wear-resistant boards, and polymer polymers are used as counter materials, which not only have good moisture-resistance, but also have the color of solid wood, so as to achieve a real effect.

If you want to solve the problem of moisture absorption at the bottom of the bathroom cabinet, you can use the design of the wall mirror cabinet to avoid direct contact between the bathroom cabinet and the ground, and maximize the use of the upper space of the bathroom, especially suitable for small bathroom space.

Where the bathroom cabinet body and the cabinet door are in contact, it is best to install a rubber strip with anti-collision function, and the bathroom cabinet door can be buffered by opening and closing the bathroom cabinet door, which can eliminate noise well. At the same time, the edge of the plate is wrapped with a multi-functional anti-collision rubber strip to fully block the invasion of moisture.

A series of hardware connectors such as slide rails and hinge lamps used in bathroom cabinets can directly determine the service life of bathroom cabinets, and at the same time bear the heavy responsibility of opening and closing bathroom cabinets. There are a lot of hardware accessories sold on the market, some ordinary hardware accessories are easy to corrode and rust, which will cause cabinet doors and drawers to be open or closed.

After bathing, the water vapor will flow into the bottom of the cabinet along the countertop, and then cause the cabinet to become moldy and deformed, then add a layer of waterproof aluminum foil or rubber mat to the bottom of the bathroom cabinet to solve this problem, and put them at the bottom of the drawer, which can also fix the bath products while preventing moisture.

Most of the bathroom cabinets used in modern families are mainly integrated design, such as our common bathroom cabinets where the basin is directly connected to the cabinet, which is convenient and beautiful to use. The outlet pipe of the basin will pass through the bottom plate and enter the ground, and the condensation in the basin will also take the opportunity to quietly soak into the cabinet floor from the cutting edge of the board, causing the bathroom cabinet floor to be damp and deformed. As long as the waterproof bottom drain is installed at the outlet of the pipe at the bottom of the pool, the service life of the cabinet can be extended.

The bathroom is the wettest place, and the bathroom cabinet we use must be waterproof and moisture-proof, otherwise it will affect the service life.

Not to mention whether the cabinet can be used as a wall waterproof, all cabinets in the bathroom need to pay special attention to the problem of waterproof and moisture-proof, the following are some feasible methods:

1.Choose waterproof materials: Choose waterproof materials to make cabinets, such as PVC board, stainless steel, etc.

Then if Hail Chunxiao you have already bought the cabinet, then you can only look at the following method:

2.Apply a water-repellent coating: Apply a water-repellent coating, such as a polyurethane coating or epoxy resin, to the surface of the cabinet to enhance its water-repellent properties.

3.Sealing: Seal the details inside the cabinet, such as seams and corners, to prevent moisture from penetrating into the inside of the cabinet.

4.Install a dehumidifier: Install a dehumidifier inside the cabinet to effectively remove the moisture inside the cabinet source and prevent the cabinet from becoming moldy and deformed.

5.Ventilation settings: Setting up a vent inside the cabinet can increase the amount of air circulation, making the inside of the cabinet less prone to moisture.

Ou Rui Yubang answers for you that there are the following kinds of boards for general custom bathroom cabinets: 1. Double decorative panels are also called melamine boards, paint-free boards, ecological boards, and some people call it a one-time forming board. Its substrate is also particleboard and MDF, made of substrate and surface bonding, surface veneer mainly has two types of domestic and imported, because it is fireproof, anti-wear, waterproof soaking treatment, the use effect is similar to that of composite wood flooring.

2. Molded board is suction board, which has always been the mainstream material of furniture door panels in European kitchens, toilets, bathrooms and other furniture.

3. Lacquered board is a kind of woodworking material. It is based on MDF, and the surface is polished six to nine times (different manufacturers have different times, the more times the process requirements, the higher the cost), primer, drying, polishing (three bottoms, two sides, one light) high temperature baking. Mainly used in cabinets, doors, etc.

Lacquered boards can be divided into three types: glossy, matte and metallic.

4. Acrylic board, commonly known as specially-treated plexiglass, has good weather resistance and acid and alkali resistance, and will not produce yellowing and hydrolysis due to years of sun and rain.

1.Veneer bathroom cabinets.

Using solid wood or MDF as the base material, the solid wood veneer board is pasted as a whole, and the surface is brushed with waterproof paint. MDF is a kind of man-made board that is processed by crushing wood raw materials into powder.

Advantages: Natural, ** lower than solid wood bathroom cabinets.

Disadvantages: Due to the different wood species of the base material and the solid wood veneer, due to the influence of the pasting process and the adhesive material, it is easy to crack and affect the waterproof effect.

2.Ceramic bathroom cabinets.

The cabinet is made directly according to the ceramic body fired by the mold, and the countertop is generally ceramic.

Advantages: easy to care for, can fully reflect the owner's clean and bright rhythm.

Disadvantages: Ceramics are fragile items, and if they are hit by heavy objects, they are easy to be damaged.

3.PVC type bathroom cabinet.

PVC is used as the blister panel, which is adsorbed on the MDF or moisture-proof board by vacuum hot pressure, and the moisture-proof board is the cured material of moisture-proof particles, and the board can be absorbed into one after blistering, without edge banding, and has excellent moisture-proof and waterproof performance.

Advantages: rich color, high temperature resistance, anti-scratching, easy to clean.

Disadvantages: Low chemical resistance.

4.Stainless steel bathroom cabinets.

It is made of high-quality stainless steel plate and other materials through several processes.

Advantages: Good stainless steel bathroom cabinet has good waterproof performance, durable, environmental protection, moisture-proof, mildew-proof, rust-proof, various styles, and chic design.

Disadvantages: limited by the material, the cabinet is thin and not practical. At the same time, it is easy to leave traces of soap and shampoo, and stainless steel is easy to darken and lose its original brilliance.

5.Premium oak bathroom cabinets.

With oak as the main substrate, it is sprayed with waterproof and environmentally friendly paint, and compared with other man-made panels, the formaldehyde emission of solid wood cabinets is lower, which is natural and environmentally friendly, and more durable.

Advantages: healthy and environmentally friendly, natural and pure, high-end and elegant.

Cons: Expensive.

6.Solid wood bathroom cabinets.

It is processed with solid wood as the main material.

Advantages: The solid wood feels relatively mild, feels that the grade is better, and can be moisture-proof. The characteristics of solid wood bathroom cabinets are natural, environmentally friendly, revealing the beauty of nature and pristine.

It is natural, chemical-free and has high ornamental value and plasticity, which can be determined according to the different needs of consumers, which is really a healthy fashion choice, which is very in line with the psychological needs of modern urbanites who advocate nature.

Disadvantages: The stability of solid wood depends on the change of moisture content, solid wood furniture will be affected by the surrounding environment and change the moisture content of the factory, and the change of moisture content will lead to deformation and cracking. In addition, when making the load-bearing part of the main body, it is easier to change if it is made into a thin plate, such as a side plate and a frame.

Bathroom cabinet will not choose? The key is the material of the bathroom cabinet, which is moisture-proof and mildew-proof!