How to open the anti theft valve in front of the water meter, and how to open the water meter switch

The anti-theft valve in front of the water meter is generally magnetic, and it can be opened with a special key, and yours is a round valve, which is definitely a magnetic valve. Please enter the "gate valve key in front of the water meter" on the ** network, and buy one according to it.

Dedicated key on! Look at whether it's triangular or quadrangular inside! The triangular key can't be opened! The four corners can be slowly opened with needle-nose pliers.

It's sealed, you move, you can see it at a glance when you check the water meter

Here are some of the well-known brands recognized in the valve industry, which are widely recognized and have a high reputation. While rankings may vary depending on time and market conditions, the following brands are generally considered to be among the top brands in the valve industry:

The following influential first-line brands of water system valves and industrial valves can be used as a reference, but for reference only: Suzhou Neway Valve, Shanghai Guanlong Valve, Shanghai Qizhong Valve, Sanhua, Su Yan, Shentong, Su Valve, Nanfang, Jiang.

First, the word Yao. The above manufacturers are only estimates and references, and the specific situation may vary or fluctuate at any time due to changes in a series of factors such as changes in the market, the size of the competition pattern, and the stability of product quality. As an indispensable key device in industrial production and civil facilities, the quality and reputation of the valve brand directly affect the satisfaction and trust of users.

These brands are known in the valve industry for their innovative technology, high-quality products and reliability. It is important to note that the market and industry are evolving rapidly, and different rankings may vary depending on time and region. For the most up-to-date ranking information, it is recommended to refer to industry reports, professional organizations or market research data for more detailed and accurate information.

What are you doing with that? If it's broken, just replace it!

In daily life, water meters can be found everywhere. So the question is, do you know how to open the valve of the water meter switch? What should be paid attention to in the installation and use of water meters? Next, let me give you a brief introduction to the relevant knowledge of the water meter.

The method is very simple, just turn it counterclockwise to open. Of course, there are also some areas where the water meter switch valve is hit with lead wire or treated to prevent unauthorized movement, at this time you can call the water company to help deal with it. In addition, you can also use tools such as pliers.

Precautions for installation and use of water meters.

1. When installing the water meter, it should be at a certain height from the ground (not less than meters), and there must be appropriate space around it, so as to facilitate the reading, maintenance and battery replacement behind it.

2. Since the electronic meters are installed now, in order to create a good use environment, it is forbidden to install the water meter in a mixed environment, otherwise foreign objects entering the card seat will cause other undesirable effects.

3. During the installation process, the arrow marked by the water meter must be the same as the direction of the water flow, for example: the water meter indicates that the equipment is installed upward and horizontally on the pipeline.

4. The water meter should be equipped with a control valve, which is helpful for the maintenance of the water meter and the control of downstream pipelines.

5. In addition, the installation area of the water meter should be far away from the area of exposure and pollution. Especially for alpine areas, it should not be installed outdoors as much as possible, if it has to be installed outdoors, anti-freezing measures must be taken to avoid freezing damage to the water meter.

6. Before the installation of the water meter, the impurities in the pipe should be cleaned up, such as stones, sediment, etc., and then the water meter can be installed, otherwise it will lead to product failure.

7. If it is found that there is water or bubbles under the glass of the water meter, it is normal and does not affect the measurement.

8. In the case of not using the water meter, you should check whether the finger is still rotating, and check whether the pipeline is leaking in time. If it rotates slightly, it is very likely to be caused by unstable pipe pressure or air in the pipe, which is not a water meter problem.

Summary: After reading the above introduction, I believe you have a further understanding of how to open the water meter switch valve. If you need to know more about it, please continue to ******, and more exciting content will be presented to you in the future.

The opening and closing of the water meter is not very complicated with the valve, as follows:

1.Find the water meter: Find the main pipe in your home, usually close to the main pipe into the house, and sometimes you may need to find the meter in the basement or upstairs tank room.

2.Find the valve location: Find the main valve above or below the meter, depending on the meter, this valve may be a knob, a lever or a valve that is directly screwed on.

3.Open the valve: Turn the knob or lever in a counterclockwise direction, or unscrew the screwed valve counterclockwise to open the valve of the water meter.

It should be noted that the water meter should be opened slowly when opening and closing to avoid excessive water flow due to too rapid water flow and the impact on the wide balance channel of the management bureau.

4.Close the valve tong: rotate the knob or lever clockwise, or tighten the screwed valve clockwise to close the valve of the water meter. When turning off the water meter, you need to pay attention to whether there is enough water in the room to store water or prepare and cook meals, bathe, etc.

When opening or closing the operation of the water meter, you should pay attention to your own safety to avoid accidents. At the same time, you should also seek the help of a professional when repairing or replacing your water pipes.

1. How to open the magnetic valve in front of the water meter.

Open it with a strong magnetic key, align the letter "C" on the key with the "C" on the magnetic lock cover and insert it on the lock, then the key and the lock are connected to the end of the fixed magnetic cannon corresponding to the lock, and the upper end of the valve stem on the valve body is provided with a rotary valve sleeve that coincides with the valve hole opened at the lower part of the lock. Gently press the magnetic lock by hand, and the magnetic lock can be opened with a light lift, and then the valve can be opened and closed.

2. How to open in an abnormal way.

If you don't have a key or the key is not easy to use, it is recommended that you first find the distribution of the switch magnetic dots, which can also be opened, mainly in the following 5 ways:

1. Use a magnet to move slightly along the top cover of the locking valve, and cooperate with the stethoscope to determine the position and number of his magnetic points, and mark them. Prepare the corresponding number of magnets and open them by pulling away the magnetic dots.

2. If the key is gone, you can use a wrench or vice to clamp it and turn it. This is the stem protruding type, there is a valve stem is recessed, this kind of flathead screwdriver.

3. There is no key to find two magnets to attract the magnetic beads on both sides to open.

4. Please ask the locksmith to open the lock.

5. Violent dismantling and direct prie-opening.

Summary. It can be opened by rotating it counterclockwise, but in some areas, the water meter switch valve is made of lead wire or treated to prevent it from moving without permission. In this case, it is necessary to find a professional maintenance personnel for repair and operation.

It can be opened by rotating it counterclockwise, but in some areas, the water meter switch valve is made of lead wire or treated to prevent it from moving without permission. In this case, it is necessary to find professional maintenance personnel for repair and operation.

In addition, you can use pliers and other tools, you need a matching T-wrench, find a few steel tease strips of similar size to insert the mountain spike hunger in, and use pliers to turn the steel bar.

Dear, hello, I am glad to solve the leakage for you, the valve in front of the water meter anti-theft round without letters to open the method is as follows: 1Use a steel hammer and a fiber back flat iron:

Insert the flat iron into the valve mouth, and then gently tap the flat iron guess book with a hammer so that it is opposite the valve core, and tap it repeatedly to open the valve. 2.Use a hammer and screwdriver:

Insert the screwdriver into the valve hole, tap the screwdriver with a hammer, and tap it repeatedly, the valve can be opened. Kiss, the above method is only suitable for situations where the valve in front of the meter needs to be closed or opened in an emergency. If you don't have the expertise and tools, don't do it without permission, so as not to cause safety problems.

It's best to contact your property company or water utility for assistance.

A valve is a control component that can be used to control faucets, as well as water meters and electricity meters. With the valve, the design can be designed to open or close. So what is the method of opening the valve in front of the water meter? How to choose a water meter? Let's take a look.

How to open the valve in front of the water meter

The opening method of the valve in front of the water meter is a counterclockwise twist, if you encounter some valves that are hit with lead wire or treated, it is not easy to open, this is to prevent someone from tampering with the water meter and take measures. In this case, you need to find someone from the company, and only they can open it. Sometimes you need some tools, pliers or a T-wrench to open the valve before the water meter, which can be bought at a hardware store, and it may be a lot more troublesome to do it yourself.

Selection of water meters

1. Select the water meter specification.

Under the common flow operation, the stability and durability of the water meter are the best, and it is the most suitable for the design. Water pipe needs to consider the follow-up water capacity need to leave some margin, when choosing the caliber needs to be a lower grade, for example, a 200m pipe is installed with a water meter with a diameter of 150mm, and when the flow increases to 200m, the water meter of the same caliber will be replaced. Large-scale industrial users need a larger diameter when choosing a water meter, and several smaller diameter water meters can be used in parallel.

The advantage of this is that when there is an individual failure, it will not affect the normal water consumption of other users.

2. Select the water meter indication type.

The reading of the water meter indicator type will be clearer and it will be very easy to copy. This type of meter can judge the reading based on the geometric angle of the pointer, and does not necessarily need to see the value of the scale cell.

3. Consider the convenience of installation and maintenance.

For industrial water consumption, it is necessary to consider the installation of the kind of dismantling water meter that can be repaired and replaced without stopping the water, and also consider the length and connection method of installation. When choosing a water meter, it is best to choose one that is manufactured in accordance with national standards or enterprise standards.

Summary: I believe you have a clear understanding of the method of opening the valve in front of the water meter. The water meter lets us know the use of water in our lives, and it is necessary to learn to understand the water meter to save water.