How to make Lantern Festival lanterns in the third grade of primary school

1. Prepare colored paper, glue sticks, small scissors, colored pens.

2. First, use scissors to cut a rectangular strip of paper from the colored paper to make a lantern, fold the rectangular paper in half, and fold it into a narrower double-layer rectangle.

3. Fold the rectangle up and down a short section and then open it, and use small scissors to cut all the parts below the broken line into thin strips.

4. Open the paper, smear the glue stick on the left and right ends of the paper, glue the two ends together, glue it into a cylinder shape, and then use scissors to cut a slender strip and a wider strip of paper from the colored paper, stick the slender strip of paper on both sides above the lantern, as the handle of the lantern, cut the wider strip of paper into a thin strip of paper below, as the lantern tassel, and smear the glue stick above the lantern tassel and stick it under the lantern.

You can use colored paper of different colors, cut some curved strips with scissors (cut a little according to the circumference of the lantern skeleton), and paste them one by one. You can also cut the paper into petals along the shape of the skeleton and paste it from top to bottom.

First make a round lantern, you can make a skeleton out of bamboo strips, iron wire, and then paste a layer of rice paper.

If you think it's a bit wasteful to use sticky notes, you can also use discarded pages, but it's best to have a punch to help.

In order to make a good lantern, we put LED lights in it for safety.

If you want to make it more aesthetically pleasing, you can make some modifications.

Simple and easy to do, it is very suitable to do with children, you can let children draw their favorite color patterns on it, so as to train children's hands-on ability.

How to make Lantern Festival lanterns? Not less than 20 cm.

The Lantern Festival lantern practice is as follows:

Materials: scissors, scale, colored paper, disposable water bottles, colored brushes, glue.

1. Cut out a rectangular cardboard, and the length of the long side should be slightly larger than the circumference of the mouth of the paper cup. Leave the left and right edges, and then draw lines and draw lines in the middle at equal intervals longitudinally.

2. Take out two paper cups, cut off the bottom part and put them together, and wrap them in the middle with colored paper with New Year's flavor.

3. Then roll the cardboard made in front to the paper cup, and form an arch effect in the middle.

4. Take out the yellow paper, cut out the tassel, and paste it to the bottom of the lantern. Finally, make a lanyard with cardboard and paste it on the top of the lantern, and a beautiful Lantern Festival lantern will be made to complete the loss!

Introduction to lanterns

Flower lanterns, also known as lanterns. The lantern is a kind of traditional folk handicraft of the Han nationality that originated in China, in ancient times, its main role is lighting, by paper or silk as the outer skin of the lantern, the skeleton is usually made of bamboo or wooden strips, and a candle or light bulb is placed in the middle to become a lighting tool. Influenced by Han culture, lanterns are also quite common items in temples in many countries in the Chinese areas of Muqi Asia.

Flower lanterns are cultural products of China's traditional agricultural era, which have both life functions and artistic characteristics. The lantern is an important entertainment culture of the Han nationality for thousands of years, it rewards the gods and entertains people, it has the function of "Wu opera" to reward the gods, and has the value of entertaining people, the modern society is more than the Spring Festival, the Lantern Festival and other festivals are hung, adding luster to the festival and the happy day, praying for peace.

Method 1:

1. Cut off the head and tail of the plastic beverage bottle, and then cut the middle part of the bottle with a knife to make uniform strips, leaving the equal part at both ends and not cutting through. Do this step, press the two ends to the middle, and you can see the prototype of the lantern.

2. Find two more bottle caps that are similar to the bottle body and perforate them in the middle, put them on both ends of the bottle body, thread them with thread or silk or iron wire, and tie the knots at both ends to make a lantern.

3. If you want to beautify, when you draw the bottle, you can carve out the look you like.

4. You can also find a cable with five or six iron wires in the middle, leave a few centimeters at both ends, remove all the skin in the middle, and then slowly pull the iron wire out and trim it into a lantern.

5. Use the paper you think looks good, and then use a bottle cap or other round east and east set up at both ends, and tie it up from the middle with a thread, and you can do it.

Method 2: 1. Cut the long paper roll in half, because I make a small lantern, so the red rectangular colored paper used is smaller.

2. Evenly cut the middle part of the rectangular colored paper into strips of equal width.

3. Stick a circle around the end of the paper roll with double-sided tape, and then stick the cut colored paper in front of you around a circle.

4. Take out a rectangular paper and fold it in half, cut it into thin whiskers with scissors and wrap it in a circle with double-sided tape to make tassels.

5. Finally, use a needle and thread to string all the parts together, and you can see a three-dimensional red paper lantern that is ready.

Method 3: 1. Install the bamboo strips with iron wire on the bamboo pedestal.

2. A bamboo strip is installed on a lattice groove, and finally the bamboo is tied with iron wire to become a bamboo frame.

3. Hold against the ground and slowly stretch the bamboo frame down until it becomes a cylindrical shape.

4. Fold the bamboo strips by hand, adjust the shape, curvature and distance between the bamboo strips of the lanterns.

5. Tie cotton thread at the upper end of the lantern to fix the bamboo strips.

6. Spread white gauze on the bamboo strips and fix them with paste.

7. Wait for the gauze to dry, and then apply the artesia.

8. After drying, the cylindrical umbrella lamp is formed.

9. Then draw and color. Generally speaking, the character is vermilion, and the picture is auspicious paintings such as Eight Immortals Crossing the Sea and Fu Lu Shou Samsung.

10. Finally, install the base on the bamboo, modify it, and it is completed.

The steps for elementary school students to make lanterns are as follows:Materials required: colored paper, scissors, double-sided tape.

1. Find your favorite color in the colored paper.

2. Then draw a line with a brush on the top piece of paper.

3. Next, crop.

4. Cut the colored paper into four parts.

5. Use colored paper to make some sticks.

6. The lantern was made into a noisy section of the mountain.

Balloons are used as props to make lanterns for the Lantern Festival by hand**. The idea is very simple, cut the tissue paper into small pieces, stick it on the balloon to dry, and then remove the balloon and load it with LED lights. Simple Lantern Festival handmade small production.

Blow up the balloon and place it on top, covering it with a layer of plastic wrap. Then apply glue to the plastic wrap and stick the tissue paper torn into small pieces. Cover the entire balloon with a few more layers.

You need to prepare: balloons, tissue paper, white latex, LED lights, brushes, scissors, hemp rope, wire. Start by making a cylindrical base out of cardboard.

Blow up the balloon and place it on top, covering it with a layer of plastic wrap. Then apply glue to the plastic wrap and stick the tissue paper torn into small pieces. Cover the entire balloon with a few more layers.

Cut a piece of hemp rope, paste it near the top, and then paste tissue paper to cover the hemp rope. Place to dry, cut along the top of the twine, and remove the balloon. Install the wire symmetrically on the hemp rope and put the LED light in. The beautiful Lantern Festival lanterns have been made!

First, the selection of materials.

1. Put the bamboo in the steam room, then take it out and dry it in a cool place.

2. Peeling cut: the rough skin is removed and the length of the bamboo strip is cut according to the size of the lantern.

Second, tie the skeleton.

Weave the lamp stand in a cross way, and tie several bamboo circles on the lamp wall in the middle of the lamp stand.

3. Make the lamp body.

Buy a few sheets of white and red ordinary rice paper, cut them to fit the length and width of the lantern skeleton, and you can design your own patterns.

Fourth, make a light source.

If you put it indoors, you only need to light a regular candle in a lantern; If you want to carry it out, it's best to make a simple circuit with a light bulb and a battery.

Fifth, paste. First, the diluted paste, evenly brushed on the surface of the skeleton, then pasted cotton gauze, that is, the cut gauze was lightly attached to the lamp stand, and then the brush was dipped in the paste and brushed, and finally the second layer of single light paper for lanterns was pasted.

6. Dry. Place the lantern in a cool and ventilated place to dry.

7. Painting. 1. Painting or clipping: painting or clipping with the pattern required by the individual.

2. Writing text: After painting, after it is completely dry, the lantern is completed.

1.Prepare materials: 1 piece of red and 1 yellow drawing paper, 1 safety scissors, 1 stapler, white latex or glue stick.

2.Fold the red paper horizontally in half, and use safety scissors to cut the red paper at an equal distance from the folded area.

3.Fold a small portion of the yellow paper horizontally and tear it off, roll up the remaining paper along the long side, and fix the opening with a stapler for the teacher or parent. In order to facilitate the operation of young children, the stapler in this step can also be replaced with white latex or glue sticks.

4.Coat the two long sides of the cut red paper with white latex and roll them up around the yellow straight tube as shown in the picture below.

5.Here's what it looks like.

6.Paste a slender red paper strip to make the lantern handle, and the colored paper lantern Qi family cage is completed.

Expansion: Flower lanterns, aka"illumination" "lantern". It is a cultural product of the era of traditional agriculture in China, which has both life function and artistic characteristics.

The lantern is an important entertainment culture of the Han nationality for thousands of years, it rewards the gods and entertains people, it has the function of "Wu opera" to reward the gods, and has the value of entertaining people, and is the treasure of the folk culture of the Han nationality.

The lantern originated from Emperor Wu of the Han Dynasty on the fifteenth day of the first lunar month in the palace to worship the most noble sun god of the gods at that time.

After the Buddha was introduced to China from India, due to the combination of Taoism and Buddhism's devotion to the Buddha, every fifteenth night of the first lunar month, the city and countryside are brightly lit, and the common people of the scholars all hang lamps, forming a unique custom of combining Chinese and Western.

Prepare the materials:Two disposable paper cups, a number of red threads, scissors, glue or double-sided tape, the remaining handle of the fireworks, red paint and gouache.

Method

1. Take a paper cup and try to choose one with a reference pattern horizontally and vertically, such as this apple pattern. Cut evenly along the longitudinal stripes into strips.

2.Cut off any excess rims flush.

3.Trim the wide rim because the rim of the cup is wider.

4.The roots pull the vertical strip outward to form an inward curl shape.

5.Take another paper cup, keep only the top part, and cut off the rest.

6.Also cut according to the pattern, in preparation for the butt with the strip just now.