How to make kites for elementary school students? How to make kites for elementary school students

Preparation materials Tools: newspaper, scissors, bamboo skewers, tape, rope.

1. First of all, we must be familiar with the construction and preparation materials of the kite.

2. Choose a light newspaper and draw a square on it. Use scissors or a handmade knife to cut the square.

3. The square is at a right angle upwards, in a perpendicular diagonal.

Bamboo skewers are placed on top to form the backbone of the kite. The long bamboo skewers are used as the backbone, and the short bamboo skewers are used as the beam bones.

4. Place another bamboo stick horizontally as a beam bone, perpendicular to the spine. Place on the top half of the piece of paper, not on another diagonal. The beam bones should be bisected vertically with the spine. Secure the intersection of the two bamboo skewers with string and tape. It is stronger with all-purpose glue.

5. Garlic then use a rope to connect the four ends of the spine and the beam bone, fix them on the paper, and cut off the paper outside the bamboo stick. At this point, a diamond shape should be formed.

6. After the basic outline of the kite is done, it is reinforced with tape in the center and four corners.

7. Poke a small hole around the intersection of the beam bone and the spine.

8. Use a rope to pass through the four small holes and connect them, so you don't need to tie them too tightly. This makes up the string of the kite.

9. Install a strip of cloth at the tail of the kite as the tail. The tail enhances the stability of the kite.

10. Connect a long rope on the lifting line as a flying line, and the tail end of the flying line is wound around the kite shaft.

11. This makes a kite.

How to make a kite is so simple.

How to make kites for elementary school students

1. Prepare a piece of paper with good toughness, thin and light, 50 cm long and 30 cm wide. The paper used to make traditional kites is generally cotton paper, rice paper, leather paper, etc.

2. Fold the paper into a diamond shape, or draw a diamond shape, and cut off the excess ground part to make the paper into a diamond shape. As you can see, this diamond-shaped (diamond-shaped) has a base of 15 centimeters and an upper part of 35 centimeters.

3. Prepare two wooden strips, one 30 cm long and the other 50 cm long, fold them to form a cross and tie it with a rope, the top of the cross is 15 cm high, and the lower part is 35 cm high. It is best to use bamboo stalk to make a cross, because it is lighter and thinner.

4. Poke two small holes in each of the four corners of the cut paper, so that you can fix the ten cross characters on the paper with nylon rope. There are also people who use glue to fix the cross, but this will increase the weight of the kite, and it is not firm, this method is mainly used to reduce its weight, of course, when the kite is in the air, it will not fall apart to test the quality of the paper.

5. It's almost a step away, and then prepare two nylon threads, as shown in the figure, tie the two ends of a rope to both ends of the short wooden strips, and then tie one end of a slightly longer nylon rope to the ** of this nylon rope.

6. For the sake of beauty, tie some of your favorite streamers to both ends of the kite and the tail. When preparing to fly, attach a very light bundle of string to the end of the nylon rope so that the kite will fly higher and higher.

How to make a kite for elementary school students is as follows:

1. First prepare a piece of colored handmade paper as the main body of the kite, pour some pigments of different colors into a paper plate, use a cotton swab to apply the pigment to the seal or bottle cap, and start to decorate the handmade paper according to your preferences.

2. Then fold the dried handmade paper in half along the width direction, and there will be a middle fold line on the paper. After rotating the paper 90 degrees, the two corners of the dregs on the narrow side are folded inward until they coincide on the middle fold line, so that the upper part becomes a triangular shape, and the lower left and right corners are also folded inward.

3. Continue to open the fold line and turn the paper over, you can see the crease of the diamond shape, and cut the diamond shape with scissors, which is the main body of the kite. Then glue the straw to the two diagonals in the shape of a diamond and cut off the part that extends beyond the paper.

4. Finally, after applying glue to one end of the hair root strip, insert it into the end of the straw of the middle fold line, as the tail of the kite, and tie a few beautiful colored ribbons to the hair root strip to make the kite look like it is flying in the air.

Kites were invented by ancient Chinese working people in the Spring and Autumn Period of the Eastern Zhou Dynasty, more than 2,000 years ago. According to legend, Mo Zhai made a wooden bird out of wood, which was developed for three years, which is the earliest origin of human kites. Later, Lu Ban used bamboo to improve the kite material of Mo Zhai, and it was not until the period of Dong Ruzhi dismantling the Han Dynasty, after Cai Lun improved papermaking, that the market began to make kites with paper, called "paper kites".

By the time of the Northern and Southern Dynasties, kites began to become a tool for transmitting information; From the Sui and Tang dynasties, due to the development of the paper industry, the folk began to use paper to frame kites; By the time of the Song Dynasty, kite flying became a popular outdoor activity.

Here's how to make kites for elementary school students:Prepare materials: colored paper, bamboo skewers, transparent paper, silk thread, scissors, glue, etc.

1. First of all, make the transparent paper into a rectangle and coat it with white glue around it.

2. Then glue the three bamboo skewers and stick them on the transparent paper.

3. Then fix it with tape.

4. Continue to paste the thin sheet of paper on the transparent paper and paste the pattern you like.

5. Finally, the silk thread can be fixed and pasted on the kite.

6. The kite is made.

Introduction to kitesKites were invented by ancient Chinese working people in the Spring and Autumn Period of the Eastern Zhou Dynasty, more than 2,000 years ago. Legend has it that Mo Zhai made wood to grind into a wooden bird, developed for three years, is the earliest origin of human kites. Later, Lu Ban used bamboo and buckets to improve Mo Zhai's kite material, and it was not until the Eastern Han Dynasty that Cai Lun improved papermaking and began to make kites with paper, called "paper kites".

By the time of the Northern and Southern Dynasties, the kite began to become a work-and-laugh balance for conveying information; From the Sui and Tang dynasties, due to the development of the paper industry, the folk began to use paper to frame kites; By the time of the Song Dynasty, kite flying became a popular outdoor activity.

Hosiery Tools Required:

Newspaper, bamboo wire, knife, adhesive tape, thin thread.

Specific steps: 1. Prepare a newspaper and cut the newspaper into a square and a small rectangle, as shown below.

2. Prepare two small bamboo wires (can be bamboo mat wires instead), one length is the length of the diagonal line of the newspaper, and the other is the length of the diagonal bow line of the newspaper. As shown in the figure below.

<>6. Finally, the rope of the kite is tied, which is tied to about 1/2 of the position, and can not be tied too above, and the position below is about the horizontal position of both ends of the bow bamboo wire or a little below. Tie it up, drag the rope with your hands, pull up the kite and run for a while, and try the force of the kite to tell the sedan car. As shown in Fig.

The handmade kites for elementary school students are as follows:

Prepare materials: paper bags, wooden boards, red ribbons. In the regiment.

1. Cut the plastic bag into a square, cut two strips of equal width on the cardboard, and place them on the plastic cross.

2. Tape to fix the cardboard on the plastic.

3. Take the red ribbon, fold it in half, and tie the midpoint of the folded in half to one end of the cardboard.

4. Cut three kite strings and tie each to the other three cardboards.

5. Straighten the three kite strings and align the vertical point at the front corner.

6. Tie a knot at the intersection of the three lines and connect the kite line of the whole axis.

The kite was invented by the Chinese, and according to legend, Mozhai made a wooden bird out of wood, which was developed for three years, and was the earliest origin of human kites, and later his student Luban improved it with bamboo. Mo Zhai's kite material has evolved into today's multi-line kite.

Elementary school students can use the "five-pointed star" production method, the following are the steps to make it::

1.Preparation

Prepare colored paper, string, scissors, glue, and homemade frame material according to the size of the kite. The frame of the kite should consist of a long thin stick and two short thin sticks. Bend the long wooden stick into the shape of a five-pointed star, and then use the short wooden stick to connect the two adjacent top corners and the bottom respectively.

2.Making of kite noodles

Spend time and effort designing a five-pointed star-shaped pattern, and you can draw animals or other favorite patterns. Next, mark the kite lines on the paper with enough edges to tease you to be able to cut the paper into the shape of a five-pointed star. When cutting paper cheese, cut the pockets at the same time to let air in and help fly.

3.Attach the five-pointed star paper to the frame

Use transparent glue to attach the pentagram paper to the frame. Be careful to maintain flatness and symmetry. Secure the string with a short stick and leave enough length at the top of the long stick to tie the string so that the kite can fly.

Finally, a horizontal stick is fixed on both bottoms of the kite, so that the kite can be stabilized and thus achieve good flight performance.

4.Precautions

Kites need to be flown in good wind and air flow, and are not suitable for use in rain or moonlit nights. When the kite falls or flies away, avoid hitting or damaging other people's property and safety.

In addition, elementary school students need to pay attention to making kites:

1.Selection of kite strings

Elementary school students should choose lightweight, soft textiles or fishing line for kite strings. If you use hard, rough lines, it's easy to scratch your hands.

2.The choice of place of flight

Kites need to fly in an open area where there are no obstacles, such as parks, playgrounds, etc. Do not fly your kite in densely populated areas, traffic jams, or around tall buildings.

3.Ensure the safety of the kite

Making a kite is a fun activity, however, remember that kites are also a dangerous item. If you encounter unstable terrain or strong winds, stop flying immediately to avoid accidents.

In general, the process of making kites for elementary school students can improve their hands-on ability, creativity, imagination and patience. As long as the above steps and precautions are followed, elementary school students will soon be able to successfully make flights.

Summary: Kite making for elementary school students requires patience and meticulousness, but the simple steps and good-looking design make it easy for children to get started. By making kites with their own hands, they not only gain a sense of accomplishment but also exercise their creativity and hands-on skills.