How to make a kite simple and fly high?

Preparation materials Tools: newspaper, scissors, bamboo skewers, tape, rope.

1. First of all, we must be familiar with the construction and preparation materials of the kite.

2. Choose a light newspaper and draw a square on it. Use scissors or a handmade knife to cut the square.

3. The square is at a right angle upwards, in a perpendicular diagonal.

Bamboo skewers are placed on top to form the backbone of the kite. The long bamboo skewers are used as the backbone, and the short bamboo skewers are used as the beam bones.

4. Place another bamboo stick horizontally as a beam bone, perpendicular to the spine. Place on the top half of the piece of paper, not on another diagonal. The beam bones should be bisected vertically with the spine. Secure the intersection of the two bamboo skewers with string and tape. It is stronger with all-purpose glue.

5. Garlic then use a rope to connect the four ends of the spine and the beam bone, fix them on the paper, and cut off the paper outside the bamboo stick. At this point, a diamond shape should be formed.

6. After the basic outline of the kite is done, it is reinforced with tape in the center and four corners.

7. Poke a small hole around the intersection of the beam bone and the spine.

8. Use a rope to pass through the four small holes and connect them, so you don't need to tie them too tightly. This makes up the string of the kite.

9. Install a strip of cloth at the tail of the kite as the tail. The tail enhances the stability of the kite.

10. Connect a long rope on the lifting line as a flying line, and the tail end of the flying line is wound around the kite shaft.

11. This makes a kite.

How to make a kite is so simple.

The kite can be flown with the assistance of another person, and here are the steps:

Tools Required: One kite.

1. First of all, two people stand in a straight line, and the distance between the two is about 20 meters.

2. You need to hold the kite, run against the wind for a distance, fly the kite in your hand, and then keep putting the line.

3. When the person holding the kite drawer goes retrograde, the person holding the kite immediately lets go, and the kite will take off with the help of the wind.

4. The person holding the kite pay-off continues to release the line while going backwards.

5. In this way, the kite rises higher and higher with the line, higher than the treetops, which shows that the effect of the two kite flying is good. When retracting the kite, reel the string slowly, and try to stay away from places with tall trees to prevent the kite from falling and hanging on the tree.

How to make a kite:

1. Use two disposable chopsticks to make a kite skeleton.

2. Select a cardboard similar to the size of the skeleton and draw the shape of the kite.

3. Cut the kite according to the outline.

4. Use the skeleton to fix the kite, put on the connection in the center, and the simple kite is ready.

The height of the kite flight is not only related to the kite, but also related to the skill and location:

1. Find a suitable good weather, if the kite wants to fly high, there must be a windy day, so that the kite can fly high and far.

2. When taking off, the cover boy should run and pull the line when flying.

3. Find a suitable venue, and it is best not to have a large flat with obstacles when flying a kite, so that you are not afraid of being hung by obstacles or hanging up the rope when flying a kite.

How to make a kite fly high and far is introduced as follows:

1.Choosing a kite: Before flying a kite, we must choose a kite that is satisfactory. It should not be too large or too small, especially since the kite string must be long and hard enough.

2.Feel the wind direction of the venue: After the kite is ready, we come to the venue to feel the wind direction of the venue first. Knowing which direction to run in will allow us to fly our kites into the sky faster and better.

3.The height of the kite: If you have a companion, you can ask your companion to hold the kite first, pull the string next to it for a while, and then run slowly.

If there is only one person, then it is necessary to plan the distance and how to make the kite fly faster.

4.Running direction: After letting the kite take off, we have to report forward through the wind, and then look back from time to time in the process of running, whether our kite has taken off? Or did it slowly fall into place?

5.Pay attention to the adjustment: when the kite flies high in the sky, it does not mean that it will float in the air forever and will not come down. In the process of flying, we also need to pay attention to the problem of adjusting the direction from time to time.

6.Collect the kite: After happily flying the kite for a while, we have to slowly move the kite line to **. During the harvesting process, be sure to pay attention to some wires and trees around to prevent the kite from hanging on it.

Need windy weather: choose a good kite, it can't fly in the sky if there is no wind. Therefore, kite flying first needs to be suitable for windy weather. Spring is the windiest season, and wind speed level 3 is best for kite flying.

Long enough string and take-up handle: Enough string will make the kite fly higher and farther. Not only do you have enough wire, but you also have a good take-up handle, which allows the user to better wrap and pay off the wire when the wind speed turns and slows down.

When flying a kite, two people need to cooperate with each other: one person needs to hold the string and one person to carry the kite when flying a kite. Put the line to a long enough length and run together.

When the person holding the kite is running, it is important to throw it upwards into the sky, and the person with the line runs quickly so that the kite can take off, so it is also important that the two people cooperate well.

The string of the kite needs to be tied to the skeleton in order to fly higher. Here's how to make it:

Prepare materials: paper bags, wooden boards, red ribbons.

1. Cut the plastic bag into a square, cut two strips of equal width on the cardboard, and place them on the plastic cross.

2. Tape to fix the cardboard on the plastic.

3. Take the red color ribbon, fold it in half, and tie the middle point of the folded in half to one end of the cardboard.

4. Cut three kite strings and tie each to the other three cardboards.

5. Straighten the three kite strings and align the vertical point at the front corner.

6. Tie a knot at the intersection of the three lines, and connect the merged thick line to the kite line of the whole axis.

Pro: Hello way to fly a kite: understand the direction of the wind, the kite is against the wind, and it is easier to fly while standing at the tuyere. Before takeoff, you can pull out a line of tens of meters, someone cooperates best, choose to quickly rewind the line, and the kite takes off.

How to fly a kite How to make a kite fly The line should maintain a certain tension after the kite takes off, and the line should be released when the tension increases, and the line should be retracted when the line is perpendicular. Kites should be flown within a controlled altitude. Kites are products invented by ancient working people in the Spring and Autumn Period of the Eastern Zhou Dynasty in China for more than 2,000 years.

According to legend, Mo Zhai made a wooden bird out of wood, which was developed for three years, which is the earliest origin of human kites.

Later, Lu Ban used bamboo to improve the kite material of Mo Zhai, and it was not until the Eastern Han Dynasty that Cai Lun improved papermaking and began to make kites with paper, called "paper kites". By the time of the Northern and Southern Dynasties, kites began to become a tool for transmitting information; From the Sui and Tang dynasties, due to the development of the paper industry, the folk began to use paper to frame kites; By the time of the Song Dynasty, kite flying became a popular outdoor activity.

If the kite wants to fly high, choosing the right traction point is the key. The traction point is selected accurately, and the kite is balanced by the wind, so it will not spin or swing when flying, and it is easy to fly straight into the sky.

First of all, we need to choose a good weather, which is the first condition. Secondly, during the take-off phase of the kite, the kite needs to be pushed by strong enough wind to take off from our hands, and when the wind is not strong enough to lift the kite, we will also increase the lifting force of the kite by running up.

In addition, the right angle allows the kite to quickly receive a strong enough and inclined upward lifting force, if you want the kite to lift more force, the angle between the line pulled by the kite and the ground must be larger, so that it will fly higher.

1. Before flying a kite, you must know the direction and speed of the wind, if there is a flag or smoke nearby, you can know by looking at the direction in which it floats. Otherwise, pick up the dead grass or throw some small pieces of paper into the air, and you can also measure the correct direction of the wind.

2. When the wind is sufficient, run forward against the wind and watch, and pay attention to the situation of the kite soaring, until you feel that the wind is strong enough, and when the kite climbs up, you can stop and release the line slowly.

When the wind is not sustained, quickly retract the line, give artificial wind, such as feeling that the kite line has a pull force, it is necessary to seize the opportunity to release the line, if the kite has a downward trend, there is a fashion to quickly retract a part of the kite line, until the kite can stand in the sky without falling.

3. It is best to have an assistant to help when flying a kite, stretch the kite line about ten meters, face the headwind, gently hold the skeleton behind the kite with the thumb and index finger of both hands, hold it without moving, and the caster will wait for the gust of wind to come, pull the kite out of the assistant's hand, and release the line while running, until the kite rises to a considerable height, shake back and forth, and make the kite stable.

Fourth, if the kite flies steadily, the kite can be tied to the trunk or object, let it float, and in the case of unstable wind direction and wind force, it must be manipulated casually, when the wind suddenly becomes stronger, the kite swings and tilts too much, there will be a danger of flipping and falling, then there are two control methods:

1. It is a rapid pay-off.

2. It is to quickly go to the direction of the kite, run forward a few steps, can ease its momentum, sometimes the wind stops, the kite falls downward, the kite shakes a few times or runs backwards quickly, if there is no way back, it can be processed by quickly retracting the line.

Rookie kite flying skills must know

1. "One mention and one mention" technique. Start by slowly and at a constant speed.

2. "Fly a kite against the wind". If the wind is favorable, the kite will never fly into the blue sky.

3. "The faster you harvest, the faster you plant." If there is a strong wind, you can't subconsciously reel in the line, you should put the line out.

The method of making a simple wind trail reed kite is as follows:Materials: colored paper, bamboo skewers, transparent paper, silk thread, scissors, glue, etc.

1. Cut the transparent manuscript paper into a rectangle and coat it with white glue around it.

2. Paste the three bamboo sticks with glue on the transparent paper and fix them with tape.

3. Paste the colored paper on the transparent paper one by one and paste the favorite pattern.

4. Fix the kite with silk threads, add a small tail, and the rectangular kite is ready.

5. Finally, take the finished kite and fly it!

Here's how to make a kite:First, the tool of the original leather material:

Colored paper, bamboo sticks, transparent paper, silk thread, scissors, glue, etc.

Second, the specific steps:

1. Prepare tools and raw materials such as colored paper, bamboo sticks, transparent paper, silk threads, scissors, glue, etc.

2. First of all, make the transparent paper into a long burning square and coat it with white glue around it.

3. Then glue the three bamboo skewers and stick them on the transparent paper.

4. Then fix it with tape.

5. After that, paste a piece of thin sheet of paper on transparent paper and paste the favorite pattern.

6. Finally, the silk thread can be fixed and pasted on the kite.

7. In this way, the kite is made.