Does anyone know how to install the eighteen Kong Ming locks

Find out the distinctive one in the Kong Ming lock, here, this one is blue, please see the last one in **.

Set up two green (identical) ones, and put one blue (other) one in the middle.

Next to it, a green Kong Ming lock was erected, and a red one was placed in the middle.

Use the index finger and thumb of your right hand to pinch the ends of the three green Kong Ming locks, and after a slight adjustment, carefully place a yellow one horizontally with your left hand.

Carefully put on the second yellow one.

Lift the blue and red Kongming locks slightly and put in the three orange ones.

After a slight adjustment, put in the third and yellow Kong Ming locks, so that the base of the Kong Ming lock is basically fixed.

<> put three white Kongming locks horizontally. Kongming locks are stronger.

<> press down on the two vertical ones in the middle. Pay attention to supporting the other vertical Kong Ming locks with your hands, and be careful of falling apart.

Put in the red Kong Ming lock.

Restore the two intermediate Kong Ming locks.

Insert the last blue one. Eighteen Kongming locks are finished.

Kong Ming lock unsolution method.

Kongming lock is also a traditional Chinese intellectual toy, which is said to have been invented by Zhuge Liang during the Three Kingdoms period. The concave and convex parts of this three-dimensional puzzle are meshed together very cleverly. There are many Kongming lock toys, with different shapes and internal structures, which are generally easy to disassemble and difficult to install.

When assembling, you need to observe carefully, think carefully, and analyze its internal structure.

Assembling method. This is one of the most common Kong Ming locks, and it is indeed more difficult to assemble without any prompts. As shown in the figure, put the six small pieces of Kongming lock according to the number, and the black part indicates the concave.

This up-facing side is the one that is put together with other small pieces after being put together. For ease of expression, it is written as the star face, and the end marked with the star is recorded as the star end. In the order of **, put the small pieces one by one.

In the assembly process shown, the direction of the Kongming lock position remains unchanged. The star is facing a certain direction, and this small block is in the opposite direction at the center. There are two ways to assemble this, pay attention to the numbering order.

Sequence Star Facing Star Position Sequence Star Facing Star Position Ending Position.

1 on left 1 on left.

2 Right back 3 Left back.

3 back on 2 back on.

4 front up or down 4 front up or down.

5 Left front 5 right back.

6 times left or right 6 times left or right.

The gossip lock assembly method of Kong Ming lock.

There should be no less than one group (three) of steel connection joints of each specification; The length is 30 40cm, representing the number of 500, and the tensile test is done.

The installation steps of the 12 Kongming locks are as follows:

1. As shown in the figure below, push the wooden strip in the direction of the blue arrow and remove the cross-shaped wooden strip on it.

2. The cross-shaped wooden strip on the top is removed, and the remaining shape is shown below.

3. Next, remove the cross strip on the side, and the shape after removal is as shown below.

4. As shown in the figure below, the wooden strips of the same shape are placed together for easy restoration.

The above are the installation steps of the 12 Kongming locks.

The 15 solutions of Kongming lock are as follows:

2. Then take out the bottom one.

<>4. Take out the bottom one.

<>6. Take out the lower one again.

7. The dismantling of this Kongming lock is completed.

Kong Ming's manuscript was locked and widely circulated among the people. It is gradually gaining attention as a way to relax the body, develop the brain, and flex the fingers. It is a casual toy for all ages. Kong Ming lock looks simple, but in fact, the inner mystery is endless, and it is difficult to complete the assembly.

This is just one of the legends. Another legend is: Legend has it that in the Spring and Autumn Period, Lu Ban, a craftsman from the Lu Kingdom, in order to test whether his son was smart, made a toy that could be put together and detached with 6 wooden strips, and asked his son to open it.

The son was busy all night and finally took it apart. This kind of toy is called the Luban lock by later generations, but in fact it is just a legend, it originated from the mortise and tenon structure in ancient Chinese architecture.

Therefore, the hole key Huaishan Ming lock is also known as Luban lock, don't stuffy stick, Liuzi Lianfang, Mo Naihe, difficult wood, annoying lock, No. 7 lock, etc.

Kong Ming lock is good for relaxing, developing the brain, and flexible fingers, and is a leisure toy suitable for all ages. Kong Ming lock looks simple, but in fact, the inner mystery is endless, and it is difficult to complete the assembly.

Kong Ming lock of the eighteen Arhat assembly method.