-
Mine is Japanese Gomi, the refrigeration is very fast, my thermometer is digital, so I can see the degree display, after the chiller is set at 25 degrees, it will stop refrigeration and start refrigeration at the degree. Personally, I feel that the noise is a little louder.,After starting,The sound behind the machine is louder than the sound in front.,It looks like an outdoor unit of an air conditioner.,The sound in front of the machine can't be heard.。。。
-
The normal power of 1 4hp chiller is 500w, that is, about 1 hour and a half kilowatt-hours of electricity.
-
The purchased chiller will basically come with a manual, and the installation and use of the general industrial chiller are similar, first open the package, check whether the machine is in good condition, whether the accessories are complete; Unscrew the water injection port of the machine to add cooling water, you need to pay attention to the water level of the cooling water, and then connect the outlet pipe and water pipe according to the equipment situation, plug in the power cord, turn on the power switch, check the water level of the water tank, and adjust the thermostat parameters.
-
This depends on the temperature, pressure and current are indispensable, it is recommended not to do it yourself, to find professional maintenance personnel, and be careful that small problems become big problems.
-
See the refrigerator operator's manual.
Consult directly with the manufacturer.
-
The chiller series of different manufacturers are different, such as CW-5000 series and CW-6000 series, in addition to the difference in refrigeration capacity, the specific size, weight and configuration parameters of the chiller are different. When buying a chiller, you must understand the production scale, production strength, qualification certification, product quality, service life, brand reputation and after-sales service of the chiller manufacturer, and then consider buying!
-
Different manufacturers and series are different, like Han's Refrigeration series and ** have these:
Han's Refrigeration air-cooled chillers are available in the following models:
Air Cooled Chiller HC003 (5U) Series, Air Cooled Chiller HC008L Series, Air Cooled Chiller HC005H HC010H Series, Air Cooled Chiller HC010M HC015M Series, Air Cooled Chiller HC020 HCI075 Split, Air Cooled Chiller HC025 HC035 Series, Air Cooled Chiller HC045 HC150 Series, Air Cooled Chiller HC025M(SW) HC200M (SW) Dual Temperature Series, Air Cooled Chiller HC175M HC480M Single & Dual Temperature Series, Air Cooled Chiller HC900M HC1100M Dual Temperature Series, Han's Refrigeration Water Cooler has the following models:
Water-cooled chiller HW015 HW035 series, water-cooled chiller HW050 HW100 series, water-cooled chiller HW125 HW200 series, water-cooled chiller HW250 HW450 series, water-cooled chiller HW600 HW1100 series.
-
Just bought a set. 60 bars are OK. It's just a little noisy.
-
It's not very clear;
Chiller manufacturers: Shanghai Tianfeng, Tuofen, if next to these are not bad.
Hope it helps!
-
Generally, the life of the chiller is a few years, and the screw chiller can even be more than ten years, and the general maintenance is to clean the pump after a period of time and not affect the quality of the chilled water. Professional maintenance please ask their company's after-sales service personnel to go, and it is best not to move.
-
It is estimated that the water circulation in the tank of the landlord is too slow.
Or the thermometer (or maybe the temperature control of the chiller) has a little error, then again, a tank of 1000 liters of water, the temperature difference is not more than a degree, it is not a big deal.
If the landlord is really serious, you can call ** to ask the manufacturer clearly.
Cleaning method of small chiller:1. Dismantle the partsIf you want to clean the chiller thoroughly, you must first disassemble it, because the parts you want to clean are not easily visible inside the group. However, because the various parts of the small chiller cross each other, and the lines are complicated and many, it is really difficult to disassemble, so before disassembly, it is necessary to understand the overall structure of the small chiller. >>>More
The domestic vertical and horizontal injection molding machines are matched when the condensation temperature of the heat dissipation water of the water-cooled chiller is below 35 degrees (the condensation temperature of the air-cooled chiller is below 43 degrees) when the domestic vertical and horizontal injection molding machines are used at normal ambient temperatures. >>>More
During the normal operation of the water-cooled chiller, it is inevitable that the refrigeration effect will be affected by dirt or other impurities. Therefore, in order to prolong the service life of the main engine group and achieve a better refrigeration effect, maintenance and maintenance should be done regularly to ensure the operation quality of the chiller and improve the production efficiency. >>>More
The form of the interface is to access the management computer through a 485 bus. Of course, before connecting to the computer, you must first connect to a multi-serial card (similar to a discrete graphics card, which must be installed on the computer case). This is the form of wiring. >>>More
There is a Baoji Baocheng air conditioning and refrigeration equipment ****, the following is their information. >>>More