How to restore factory settings of the S1 network set top box

1、First turn on the TV,Enter the TV interface,Then enter the main interface"Tools。

2. Then click on the pop-up window to open the "Advanced Settings" option.

3. Then click and select "Restore Factory Status" in the pop-up window to restore factory settings.

Finish. <>

4. Then wait for the restoration to complete.

1. Open the settings on the TV, find the general options in the settings interface, and click to enter.

2. Find the set-top box setting option in the general interface and click to enter.

3. Find the Restore Factory Status option in the set-top box settings interface.

4. After that, press the OK button on the remote control to restore the set-top box to factory settings.

If it is a network set-top box used by China Unicom users, the steps to restore factory settings are as follows:

Step 1] Press the "Settings" button on the remote control of the set-top box to enter the settings page;

Step 3] Move the cursor to "Advanced Settings" and click OK.

Step 4] Enter 10010 in the pop-up password box and click OK.

Step 5] Move the cursor to "Factory Reset Value" and click OK.

Step 6] Enter 10010 or 6321 in the pop-up password box and click OK.

Step 7] Click the OK button on the prompt "Whether to restore factory value" page and wait for the set-top box to restart automatically.

1. Press the "Menu" button of the remote control of the set-top box;

2. Then use the up and down buttons of the remote control, select "System Settings", and "Confirm" button to enter;

3. In "System Settings", use the arrow keys to find "Factory Reset" and click "OK".

4. A password box for entering the password will pop up, and the password will be entered correctly.

5. A dialog box pops up again for the user to confirm whether to restore factory settings, and select "OK";

6. Successfully restore the factory reset system.

There is a button on the layout, press and hold it for a while, and you're good to go. Each device is different, but it has this feature, please check it out for yourself. Best wishes!

1、First turn on the TV,Enter the TV interface,Then enter the main interface"Tools"Search for relatives。

2. Then click on the pop-up window to open the "Advanced Settings" option.

3. Then click and select "Restore Factory Status" in the pop-up nuclear leakage answer window to restore the factory settings.

4. Then wait for the restoration to complete.

Summary. 1. First of all, turn on your TV and press the "Menu" button to enter the menu interface; 2. In the menu interface, find "System Settings" and enter the system settings; 3. In the system settings, find "Software Management" and enter Software Management; 4. In the software management, find "Hidden Installation" and enter the hidden installation; 5. In the hidden installation, you can see all the software that can be hidden and installed, select the software you want to install, and click "Install" to complete the hidden installation.

1. First of all, turn on your TV, press the "Menu" button to check the barrier, and enter the menu interface; 2. In the menu interface, find "System Settings" and enter the system settings; 3. In the system settings, find "Software Management" and enter Software Management; 4. In the software management, find "Hidden Installation" and enter the hidden installation; 5. In the hidden installation, you can see all the software that can be hidden and installed, select the software you want to install, and click "Install" to complete the hidden installation.

Fellow, I really didn't understand, I can be more specific.

During the installation process, if the "installation failed" message appears, it may be due to the low version of your computer system or the presence of some viruses or Trojans in your computer system, which causes the installation to fail. 3. Solution: Stupid (1) First of all, you can check whether your computer system version meets the requirements, if not, please upgrade your computer system version; (2) Secondly, you can use anti-virus software to conduct a comprehensive scan of your computer to detect and kill viruses or Trojan horses in your computer; (3) Finally, you can re** the latest version of the memory classic S1 network set-top box hidden installation software and reinstall it.

4. Personal tips: Before installing the software, be sure to check whether your computer system version meets the requirements, and regularly use anti-virus software to conduct a comprehensive scan of your computer to prevent the intrusion of viruses or Trojan horses.

Flashing steps for S1 local upgrade:

Step 2: Copy the file to the root directory of the USB flash drive (directly drag the file to the USB flash drive with the mouse).

Step 3: Use a sharp object such as tweezers or a toothpick against the reset button (the area marked in red in the picture below).

Step 4: Turn on the power supply, wait for the system to automatically flash the machine, and the flashing progress bar will appear on the TV.

Step 5: Release the reset button, it will automatically restart, and the flashing will be completed.

System Failure! I have encountered it, and like Android phones, there will be some problems, which can be solved by flashing the phone! There are flashing tutorials on the Internet.

Account: Password: szider

The flashing method is all there.

Is there a reset hole? Burst it according to the instructions reset the chrysanthemum hole, and then look at it, if it doesn't work, consult the manufacturer how to brush the rom, it is estimated that the rom hangs.

Hello, are you using the memory box, or the LETV box?

Network set-top box to clean memory:

1. You can use the one-click optimization scrambler software that comes with the top moderator box to optimize.

2、You can also useUdisk**Install third-party software to clean up garbage and release memory,Like【One-click cleanup】【Dangbei assistant】【TV optimization master】【Cheetah cleanup master】And so on, the software is very good.

3. Restore the set-top box to factory or flash the machine to clean up the system garbage, and the software needs to be reinstalled after restoring the factory settings.