The uneven color of the paved tiles, how to deal with them quickly

Tiles should be left seams.

Tile must be left joints, because the tile will undergo thermal expansion and contraction under the environmental influence, and the reserved brick joint can avoid the adjacent tiles squeezing and falling off. In addition, tile joint retention can also reduce uneven joints and uneven paving caused by tile size errors and manual operation errors.

2.Tiles soaked in water.

The water absorption rate of ceramic bricks is high, so it must be soaked in water to prevent the embryo body from absorbing the water in the cement mortar after paving and affecting the adhesion. The soaking time is determined according to the water absorption rate of the tile, and the brick does not bubble.

3.Clean the dust on the back of the tile.

Ceramic tiles are easy to form a layer of white powder on the back of the tile after processing, generally this layer of powder will be cleaned before leaving the factory, but if it is first sent when paving, it needs to be cleaned again, because it will lead to the formation of a barrier layer when the tile is paved, affecting the contact between the cement mortar and the brick, thereby reducing the bond strength. If necessary, it can be brushed in water to ensure that there is no residue of mortar.

4.Pay attention to the direction of tile paving.

Especially for ceramic tiles with obvious texture, in order to ensure the overall effect after paving, we must pay attention to the direction of the arrow on the back of the tile, otherwise the texture will not look good, or the paving is uneven.

5.The bonding material should be uniform.

Many construction masters will use a scraper to quickly apply and scrape back and forth when applying cement mortar (or tile adhesive), and the bend is curved and turned, which is not right, because the surface tooth is uneven and uneven, which will lead to a smaller joint area between the adhesive material and the tile, and the adhesion will become weaker.

The correct approach should be: on the horizontal base surface, use the tooth scraper to evenly form a strip tooth layout.

6.Hook seams. It is recommended to carry out the grout treatment 24 hours after the tile is paved, and evenly apply the grout agent to the tile gaps with the pre-adjusted grout. In pursuit of beauty, if you have enough budget, you can use beauty sewing agent, and the color and performance are even better.

7.Sunny angle. The yang angle is the convex angle formed by two walls or columns, and there are two common ways to deal with it in this place, one is to pour a 45° chamfer on the back of the tile, and then the two tiles are spliced into a 90° angle.

The second is to buy a special male angle line, the male angle line on the market has a variety of styles, you can choose rounded corners and right angles according to your preferences, the price will not be very expensive, and it can also play a role in protecting the chamfering of ceramic tiles.

8.Floor drain. The toilet is not designed with a slope and cannot be drained. For example, without diversion, the middle of the tile is directly opened and installed, so that the bathroom can become a pond in seconds.

The correct approach should be: when paving the floor tiles, other areas should have a slight angle tilt in the direction of the tile floor drain, and then cut the tile diagonally into four pieces at the floor drain opening, and the tiles around the floor drain form a groove according to a certain inclination when paving, and the floor drain is embedded in the center.

The color of the wall tiles is different, and the porcelain plate can be exchanged for free to the merchant if it is not in the water and before it is on the wall. The requirement is that the tiles produced by the same batch number will be consistent in color. If it is found after paving the wall, then negotiate with the merchant to solve it.

It depends on how you transacted with the merchant at the time of the purchase, and if the merchant did not act fraudulently against you, it is your own responsibility because you are greedy for cheap. Conversely, if the merchant does not return or exchange, you can file a complaint with the merchant.

Remove and reattach the tiles! What can be done. It can only mean that the tiles you bought are not good, there is a color difference, and it is not a batch of goods.

The uneven color of the paved tiles, how to deal with them quicklyTear it down and start over.

Situation 1: Different shades, irregularly distributed on the wall and floor.

1. The embryo body of the tile is loose and the water absorption rate is too large: the embryo body of the tile is too loose and the water absorption rate is too large, after the tile is paved, it will not only absorb the moisture in the cement mortar, but also the cement slurry will penetrate into the brick body, so that the cement residue remains in the tile embryo body, resulting in different shades of the tile.

2. There is a color difference problem in the tile: before paving, there is no careful check whether the color of the tile is consistent, and the color difference of the tile itself is not found, resulting in a different color after paving.

Situation 2: There are regular shades of inconsistencies.

1. When the ceramic tile is not paid attention to, the color number of the product: the same model of ceramic tile products, if it is produced in different batches, the color may be different, if the process of filling the tile, if not paid attention to, there will be a problem of color difference.

2. Ceramic tiles due to the problem of construction sequence, may cause the color of the tiles to have shades, the general wall tiles are paved from the bottom to the bottom of the penultimate row to the top, and then paved the floor tiles, and then paved the lowest part of the wall after the floor tiles are paved, because the wall and floor tiles are waterproof, the lowest layer due to the upper moisture to flow downward, and its own moisture is difficult to lose, so there will be a situation that the color of the lower layer and the upper tile is different. This color is different shades, and it is common to see that the color of the bottom layer is different from that of the upper layer.

Situation 3: There are water stains on the roof or the wall outside the space.

1. There may be a problem of water leakage upstairs: the upstairs neighbors due to the waterproof for good treatment, resulting in water leakage into the downstairs wall, due to the frequent use of water upstairs (such as showers, etc.), the water will continue to leak downstairs along the wall, resulting in the cement mortar of the tile base is difficult to dissipate, resulting in different shades of tile color, for the exclusion of this point, you can check whether there are water stains on the top of the bathroom and the outer wall of the bathroom wall, if not, this point can be excluded.

If the tiles that have been laid are uneven, the following methods can be considered to remedy it:1Smoothing the tile surface:

Use a tool such as a grinding wheel and a clamp to smooth out the protruding part and make the tile flat. This method is suitable for situations where the tile surface is less above the ground. 2.

Re-tiling: If there are many uneven tiles, or if the protruding part is large, you can consider re-tiling. When re-paving, the original tiles need to be removed and the new tiles need to be re-installed to ensure that the floor is level.

3.Use self-leveling materials: Self-leveling materials can fill in uneven parts of the ground and make the ground smooth.

When using self-leveling materials, Danhu needs to clean the ground first, then pour the self-leveling material on the ground, push it evenly with a tool, and wait for the material to level naturally. 4.Use brick spacers:

If the uneven tiles are caused by the uneven base floor, you can place a brick gasket under the tiles. Brick spacers can raise or fill in the tiles, thus flattening the tiles. It is necessary to choose the appropriate remedy according to the actual situation to ensure the flatness of the ground.

If you are unsure of what method you should take, it is recommended to consult a professional construction worker or a relevant building materials supplier.

The most important decorative material of ceramic tiles, in the process of paving, it is often found that there is a serious color difference, which affects the aesthetics very much, but generally everyone finds this problem after the tiles are paved, so what should I do if the tiles have a serious color difference but have been paved? Is there a remedy for the color difference in tiles that have been paved? The following shares a few tiles with serious color difference remedies to introduce the envy tong.

What should I do if the tile has a serious color difference but has been laid?

The problem of color difference in ceramic tiles can be solved according to the reasons why the tiles contain different color differences. If you find that the purchased tiles have color differences, you can contact the seller for replacement; If you can't determine whether the tiles you buy contain color difference, you can seize a few tiles and splice them on the ground to judge whether the tiles contain obvious color difference; If the tile has a color difference problem after a certain period of use, you can consider whether the tile contains stains, and it can be destained and wiped to solve the problem of tile color difference.

Is there a remedy for the color difference in tiles that have been paved?

There are many kinds of color differences in ceramic tiles, and the solutions are different for different situations.

1. If there is a color difference in the tiles you buy, you can directly contact the merchant to replace.

2. If you are not sure whether there is a color difference in the tiles you purchased, you can conduct a test first. You can take a few tiles and splice them on the ground, and then judge whether there is a color difference from the color, texture and whether the tiles are obviously different.

3. If there is a color difference in the tile after the paving is completed, it is caused by improper paving, it is necessary to pave it in accordance with the pattern direction of the tile, so as to achieve the unity and harmony of the whole in order to ensure the aesthetics of the home.

4. If the color difference of the household tile occurs after using it for a period of time, it is caused by stains on the tile. At this time, as long as the surface of the tile is cleaned, the problem of color difference can be eliminated.

In fact, there are many reasons for the existence of color difference in tiles, such as large water absorption, confusion of production batches and improper operation, etc., we need to take a few tiles to compare colors before paving tiles, and find a color difference, you can contact the manufacturer to replace, otherwise the paving will go up, and it will be very troublesome to replace the tiles again.

Many people will choose floor tiles to decorate the ground, so what should I do if the floor tiles are uneven? What are the brands of floor tiles? Let's take a look.

1. What to do if the floor tiles are uneven.

1. If the cement is not dry and the floor tiles are uneven, you can use a wall knife to gently knock the floor tiles.

2. If the uneven limbs of the small area of floor tiles are accompanied, the uneven floor tiles can be replaced with new floor tiles, and the last batch of putty can be brushed flat.

3. If the floor tiles are uneven in a large area, you need to purchase the floor tiles again and rework them all.

Second, what are the brands of floor tiles?

1. Marco Polo.

Brand features: one of the top ten floor tile brands.

First, the well-known brand of China's ceramic industry and the preferred brand of home decoration.

Brand features: Top ten floor tile brands, advanced design concepts occupy the domestic market.

3. Nobel.

Brand features: one of the top ten brands of floor tiles in China and one of the well-known brands trusted by consumers.

4. Mona Lisa.

Brand features: occupy the domestic market with advanced production technology and unique shape.

Brand features: one of the top ten floor tile brands in China.

First, the leader in the floor tile brand.

6. Xinzhongyuan.

Brand features: one of the top ten brands of ceramics and one of the top ten famous floor tile brands in China.

Brand features: 40 years of business development history, healthy and environmentally friendly home life concept.

Brand features: complete product variety, reliable quality, China's famous brand, the top ten brands of national product quality notarization, China's excellent environmental protection green Yusui products.

9, Oushennuo.

Brand features: fashionable, beautiful, luxury, the key high-tech industry of the National Torch Plan, the preferred brand of European home decoration style.

Summary: What to do about the unevenness of the floor tile paving and what is the knowledge of the floor tile brand, it is briefly introduced here, I hope it can help you, if you want to know more, please continue to pay attention to Qeeka Home.

Summary. Hello dear, happy to answer your questions. The color of the tile is not the same as this remedy, 1. The method of using marble glue reinforcing agent is used to fill the vacancy on the porcelain surface with toner that is close to the color of the original tile, and it needs to be polished and polished after hardening.

2. With porcelain cleaning paste, it can be used as caulk, there are a variety of colors can be modulated, and the prepared porcelain cleaning paste can be evenly applied to the ceramic tile with large color difference. 3. When there are scratches and stains on the tiles, you can apply stain remover, and then wax and spray silicone, the surface will be more wear-resistant and keep bright for a long time.

Hello dear, happy to answer your questions. The color of the tile is not the same as it can be remedied, 1. The method of using marble glue reinforcing agent is used to fill the color close to the original tile to fill the vacancy on the porcelain surface, and it needs to be polished and polished after hardening. 2. With porcelain cleaning paste, the ruler can be used as a caulk, and a variety of colors can be modulated, and the prepared porcelain cleaning paste can be evenly applied to the tile with a large color difference.

3. When there are scratches and stains on the tiles, you can apply stain remover, and then wax and spray silicone, the surface will be more wear-resistant and keep bright for a long time.

Extended information: 1. Similar colors; Similar to the color system, the decorative effect will definitely not be too ugly, and there is a color difference between the two, which can form a unity, and has a stunning effect in the coordination. For example, light brown floor tiles and orange-yellow sewing agent, as well as gray floor tiles and white sewing agent, etc., are good choices, and the color should not be too much, otherwise it will look messy.

2. Same color; The two have the same color system, which visually gives people a sense of harmony and unity, comfortable and good-looking, and must look good, so many empty skins are fresh and elegant interior decoration styles will use this collocation. For example, light yellow bricks to deepen yellow grout, or black bricks with gray grout, are good choices. 3. Cool and warm colors; The combination of warm and cool tones is the most classic and often creates the most stunning effect.

The use of this method requires us to dare to match and dare to use it in order to create an ideal effect.