Do there are a lot of air bubbles in car wraps that affect performance?

The car film itself is a water sticker, you need to clean and check the car after the film, just paste some small blisters is normal, now in March and April the weather is good to dry the water and evaporate it, if you are in a hurry, you can let you wrap the film with a baking gun to bake it, do not hinder you from using. I'm all mini is the film of the Tmall polar film home,Because of this, I also specially asked the customer service,When I picked up the car, the store lights came down and didn't see it clearly,The next day I looked carefully during the day to see,I also lost my temper with the polar film customer service,But the polar film customer service is really attentive,Explain a wave to me online,The next day also gave me ** confirmation,But at that time, the bubbles have gone down,The effect of the car coat is really good,Same as a new car,Kaisen

It will definitely affect the performance, the bubbles mean that there is no sticking on, there is air inside, first of all it is not good-looking, and most importantly the film will get up.

First of all, the blistered car film will seriously affect the appearance and make the owner look very uncomfortable. Secondly, it will affect the driving line of sight, the unclear glass film will cause the owner to see the road conditions clearly and cause traffic accidents, and the inferior film generally contains benzene, formaldehyde and other carcinogens, once blistered, the closed environment between the film and the glass is destroyed, after sun exposure, toxic gases will be released, endangering human health.

Hello, the car film bubbles will first affect the thermal insulation effect, and secondly, it will affect the appearance, such as the front and rear windshields will also affect the line of sight. It is advisable to deal with it in a timely manner! Hope that helps!

Normal. If it is an air bubble, and there are few, it will disappear on its own for a moment or so. If the glass is not washed cleanly when the film is applied, it is dust, and it will never go away. If it doesn't disappear after a while, go to a beauty shop and re-apply it.

Inferior film will bubble: When the plastic lining of the film is torn off and then re-laminated, the inferior film will blister, while the high-quality film will remain intact after compounding. Feel: **The film feels thick and smooth.

There are several bubbles in the car film that are abnormal, which belongs to the wrong operation of the film, the foaming is hollow, and the car glass is separated, the film is not attached to the glass, and the service life of the film will be reduced after a long time after the expansion of the bubbles in the sun. Car wraps are not allowed to have bubbles or hollow drums.

Generally, it will be processed well, and there are no bubbles.

Abnormal. 1.There are generally two main reasons for the blistering of car film There are generally two main reasons for the bubbles of car film:

One reason is the quality of the car film itself, and the other reason is the construction quality of the car when it is applied to those films. For the first reason, the majority of car owners should effectively determine the choice of film before the car film.

2.If the solution to the blistering of car film has been excluded, then it is the second situation, after all, car film is mainly manual work, and it will inevitably appear in the process of filming.

It is not normal to have a few bubbles in the car film, which is a quality problem or caused by the fact that the film technology is not at home, once there are bubbles, then there will be more and more bubbles over time.

Under normal circumstances, a bubble is not allowed to be attached to the vehicle, and if a bubble is found, it must be re-filmed.

The blistering phenomenon of car film is mainly due to two aspects, one is that there is a problem with the quality of the car film, and the car film bought by the car owner is an inferior car film, or a fake film. There are too many types of car film, and the height is uneven, some consumers think that the car film is not worth selling and buying at a high price, so they bought a cheap film, but they don't know that the quality of the cheap film is very poor, not only does it not have the protective effect that the car film should have, but even the toxic gas is released at all times, plus the workmanship is rough, the material is cheap, and the sun is exposed, it is easy to appear bubbles, deformation and hemming, which affects the appearance, blurs the vision, and endangers health and driving safety.

Another aspect is that the construction is not professional enough, resulting in bubbles. In order to achieve the desired effect, it is best to carry out the car film in a dust-free workshop to avoid the dust in the air sticking to the gaps in the car film and causing bubbles; Or the glass is not cleaned when the film is attached, and it is easy to produce bubbles after pasting. It is recommended to go to a regular beauty shop and ask professional fingers and construction personnel to operate.

If your membrane has bubbles, if the foaming is small and not much, gently puncture it with the tip of a needle, then wrap the towel with a thin card and slowly scrape it flat; If the area is large and affects the line of sight, it is better to go to the physical store and let the professionals solve it.

However, no matter how many bubbles there are, you need to go to a professional film shop to inquire about the cause of the bubbles, which will not affect driving safety. If it is an inferior film, for the sake of health and safety, it is necessary to re-paste a new film. If you paste it again, you must choose a high-quality film, consult and experience more, and feel the effect before making a decision.

The car film can not only reasonably block part of the heat from entering, but also have the effect of explosion-proof type at a certain level. Then there are some car buyers in order to better save a sum of money and personally put on the car film, but after the paste, I see that there are bubbles in it, and whether this situation is normal, let's analyze it in detail.

There are bubbles in the first film, most of them are due to the fact that they are not neat and tidy in the process of glass cleaning, just like the protective film of everyone's mobile phone, even if there is dust in it, it will foam, but large-scale glass film such as automobiles, dust is also unavoidable, so it is normal to have bubbles. If you can use a soft spatula to scrape off the bubbles, then it is okay if you can't scrape, but if you puncture the bubbles with a fine needle or bask in the sun for a few days, it will fade by itself.

It is worth mentioning that if it is a shoddy car film, it is not only very easy to have bubbles and fine lines after pasting, but also open the glue after a long time (the service life is not long), and many air bubbles will occur. Therefore, we must go to the professional to buy, and we must pay special attention to the natural quality.