What is grinding oil? What is Cutting Oil?

The grinding oil can take a large amount of grinding away and reduce the temperature of the grinding zone. The effective use of grinding oil can increase the cutting speed by 30%, reduce the temperature, reduce the cutting resistance, have good extreme pressure, improve the accuracy and finish of the work, good cooling and cleaning performance, effectively extend the service life of the grinding wheel, good lubricity and wear reduction, no sintering, low fogging, high flash point and outstanding sedimentation during strong grinding. It can be used for most metals such as stainless steel, carbon steel, high nickel steel, cast iron, etc., and is suitable for carbon steel, bearing steel, ductile iron, alloy steel and other materials.

The product is made of refined base oil compounded with different proportions of vulcanized lard, sulfide fatty acid esters, extreme pressure anti-wear agents, lubricants, rust inhibitors, anti-mildew fungicides, antioxidants, refrigerants and other additives, so the product has excellent thorough protection performance for the CNC machine itself, cutting tools and workpieces. The cutting oil has a super lubricating extreme pressure effect, which effectively protects the tool and prolongs its service life, which can achieve extremely high workpiece precision and surface finish.

According to the chemical composition of the oil, cutting fluids are divided into two categories: non-water-soluble (oil-type) fluids and water-soluble (water-type) fluids.

Oil type. It is divided into three types: mineral oil cutting oil (or compound oil), extreme pressure cutting oil and active cutting oil. The mineral oils used are kerosene, diesel, and light Runmingsen lubricating oil fractions.

Mineral oil is compounded with a certain proportion of animal and vegetable oil (5% 10%), which is suitable for light-duty machining. Extreme pressure cutting oil is added with sulfur, phosphorus, chlorine extreme pressure additives to meet the requirements of ferrous metals, gears and other deep metal processing. Compounds such as active sulfur are added to the active cutting oil for deep hole drilling and tapping of high-alloy materials.

Water type. Water-based cutting fluids can be divided into emulsions, semi-synthetic cutting fluids, and synthetic cutting fluids.

According to the application, it can be further divided into four types: general-purpose type, anti-rust type, extreme pressure type and transparent type. The first three are oil-in-water emulsions with emulsifiers and other additives (anti-wear agents, etc.) added to petroleum lubricant base oils. The clear type can be a clear liquid with a small amount of lubricant or no lubricating oil (i.e., an all-water-based synthetic cutting fluid).

Water-based cutting oil is a fast-growing and widely used variety in recent decades.

There is also a cutting fluid that is completely water, that is, electrolytic strong alkaline water. The strong alkaline water produced by the strong alkaline water equipment can reach the highest pH.

Compared with cutting oil and water-based cutting fluid, alkaline electrolyzed water is 100% water, which is stable and inexpensive, and the cost is only one-tenth or even less of that of water-based cutting fluid. It has excellent cooling and cleaning performance, no foaming, easy to wash, and alkaline electrolyzed water has good anti-rust performance. Moreover, the potato dates in the cutting oil and water-based cutting fluid contain organic compounds, oily agents, surfactants and other components, which have a destructive effect on human health and the environment, while alkaline electrolyzed water is harmless to the human body and the environment, and is an environmentally friendly and low-cost cutting fluid, which can completely replace the water-based cutting fluid in high-speed shallow cutting. Exciting acres.

It is suitable for cutting of cast iron, alloy steel, carbon steel, stainless steel, high nickel steel, heat-resistant steel, die steel and other metal products, high-speed cutting and heavy-duty cutting. Including turning, milling, boring, high-speed tapping, drilling, reaming, broaching, hobbing and other cutting operations. A special lubricating oil is prepared by blending some animal and vegetable oils and antioxidants, anti-wear agents, rust inhibitors, etc. from low-viscosity lubricating oil base closed round oil.

There are two types of manuscript Zen: oil type and water type. The latter has a water content of 80% to 95%, has emulsifying ability, and is generally called cutting fluid. Cutting oils are used to lubricate and cool machining tools and components during metal cutting operations.

Excellent lubrication performance of the car collapse, effectively prolong the tool life.

Low odor, low oil mist, maintain a good working environment, environmentally friendly formula, do not hurt hands, etc.

Excellent cooling and cleaning performance to ensure the cleanliness of the processing area and improve the processing accuracy of the product.

It has good oxidation resistance, strong oil film strength and high bearing capacity.

The oil is made of high-quality mineral base oil, with sulfide lard and sulfide fatty acid ester as the main extreme pressure additives, and added rust inhibitors, antioxidants and other additives, especially suitable for the harsh processing of difficult-to-machine metal materials, with super lubrication extreme pressure effect Kiwu fruit, effectively protect the tool and prolong its service life, can obtain extremely high workpiece precision and surface finish. Cutting oil is added and surfactant is developed, and the product is black. Provides excellent product surface finish, cutting oil.

It is widely used for forming and cutting hard metal materials such as stainless steel, low carbon steel, high carbon steel, etc.

Abrasive oil adheres to the surface of parts and abrasives during finishing, and its functions are as follows:

Softening: that is, the chemical action on the metal surface oxide film to make it soft and easy to remove from the surface grinding to improve the grinding efficiency.

Lubrication: Like grinding lubricating oil, it acts as a lubricating agent between the grinding block and the metal parts, resulting in a smooth surface.

Washing effect: Like a detergent, it can remove oil stains on the surface of metal parts.

Anti-rust effect: The grinding and processing parts have a certain anti-rust effect in a short time before cleaning.

Buffering: In the process of finishing, agitation with water will alleviate the mutual impact between parts.