How to maintain a bath bomb? How to maintain a Midea bath bomb?

Midea bath bombs should pay more attention when using, mainly including the following points:

The first step, the user has been using the Midea bath bomb for a long time, the switch panel is stained, when cleaning these stains, the power supply (neutral line and phase wire) should be cut off first, and in the case of confirming that there is no power, we take off the bulbs in the Midea bath bomb one by one and wipe them with a rag stained with a small amount of neutral detergent, and then wipe them dry with a clean dry cloth after the stains are wiped off.

The second step is to take off the tension spring, that is, there are 4 springs at the four corners of the Midea bath bomb box, and we have to take it off. And use neutral disinfectant or cleaning agent to wipe the surface of the Midea bath bomb and the surface of the bulb, these are all wiped off, and the inside of the chassis must be wiped clean, although the chassis is fixed on the roof, but in order to ensure the service life of the bath bomb, it is still necessary to clean it thoroughly.

The third step, when cleaning the Midea bath bomb mask, warm lamp or illuminator, after confirming that the power is cut off, remove the warm lamp, lighting lamp, and mask one by one, wipe it with a rag stained with a small amount of neutral detergent, and wipe it with a clean dry cloth after the stain is wiped off, and dry it on the surface of the wiped lamp body and mask (not exposed to the sun or baked), and then install it. This cleaning not only prolongs the life of the bath bomb, but also benefits health.

In fact, there is not much maintenance, as long as you clean the panel and light bulb. But do not operate with electricity and do not wipe with organic solvents.

Bath Bomb Encyclopedia: Cleaning and maintenance of bath bombs.

Although many families now install and use bath bomb products in the bathroom, no one generally conducts routine maintenance of bath bombs, in fact, regular maintenance of bath bombs is still very necessary. The way to maintain a bath bomb is actually very simple, do it every 30 days or so to ensure the safety and effectiveness of the bath bomb. So, how to maintain a bath bomb?

How to maintain a bath bomb? The first step, the user has been using the bath bomb for a long time, and the switch panel is stained, when cleaning these stains, the power supply (neutral line and phase wire) should be cut off first, and in the case of confirming that there is no power, we take off the bulb one by one and wipe it with a rag stained with a small amount of neutral detergent, and then wipe it dry with a clean dry cloth after the stains are wiped off.

The second step is to remove the tension springs, that is, there are 4 springs at the four corners of the box, and we need to take them off. And use a neutral disinfectant or cleaning agent to wipe the surface of the bath bomb and the surface of the bulb, these are all wiped off, and the inside of the main body case should be wiped clean, although the main body shell is fixed on the roof, but in order to ensure the service life of the bath bomb, it is still necessary to clean it thoroughly. The third step, when cleaning the mask, warm lamp or lamp, after confirming that the power supply of Heshan is cut off, remove the warm lamp, lamp and mask one by one, wipe it with a rag stained with a small amount of neutral detergent, and wipe it with a clean dry cloth after the stain is wiped off, and dry it on the surface of the clean lamp body and mask (not exposed to the sun or baked), and then install.

This cleaning not only prolongs the life of the bath bomb, but also benefits health. The top temperature of the bath bombThe top temperature of the bath bomb is generally not high, that is, it is not much different from the room temperature. Because bath bombs rely on heating lamps to generate heat, converting light energy into heat energy.

The light is downwards and does not affect the top.

Cleaning steps: 1. Confirm that the bath bomb has been turned off and completely cooled;

2. Remove the bulb;

3. Use warm water and soft cloth to thoroughly clean the lamp head;

4. If there are stubborn stains on the lamp head, you can use neutral detergent to clean it;

5. Choose a stable ladder or chair;

6. Stand on a chair and scrub the outside of the bath bomb clean;

7. Use clean water to completely remove the detergent attached to the bulb and the outside of the fuselage;

8. Make sure that the bath bomb has been cleaned and dried and re-installed the bulb in place;

9. Turn on the bath bomb to check whether each function can operate normally;

10. Turn off the bath bomb to ensure that the air in the bathroom is relatively dry and has a certain fluidity.

(Recommended reading: Bath Bomb Encyclopedia: What is a Bath Bomb?

Bath Bomb Encyclopedia: Classification and comparison of bath bombs.

Bath Bomb Encyclopedia: Buying tips for bath bombs.

Encyclopedic knowledge: What is an integrated ceiling?

Bath Bomb Encyclopedia: Installation and use of bath bombs.

Bath bombs are basically the standard configuration of the bathroom. When you take a bath in winter, turn on the bath bomb, and the whole person feels like basking in the sun, which is very warm.

However, most families neither clean nor maintain the bath bomb after installing it, and the bath bomb will slowly break. In fact, a bath bomb is an electrical appliance that needs regular maintenance to prolong its life.

How to maintain a bath bomb:

1.Do not spray with water when using.

Although today's bath bombs are waterproof, they still can't be sprayed with water when they are in use. Because most of the parts inside the bath bomb are metal, there may be a danger of short circuit after entering the water.

2.Do not switch the bath bomb on and off frequently.

If you turn on and off the bath bomb frequently, it will greatly affect the service life of the bulb, so try to avoid turning it on and off frequently.

3.Do not turn off the bath bomb immediately after use.

Just after taking a shower, there is still a lot of water vapor in the bathroom that has not been exhausted, wait until all the water vapor is exhausted, and then turn off the bath bomb.

4.Wash bath bomb stains regularly.

Regular cleaning of the stains can not only prolong the service life of the bath bomb, but also be very beneficial to your health.

Since bath bomb cleaning is so important, how to clean the bath bomb?

How to clean a bath bomb:

1.Remove the bulb with the bath bomb turned off and cooled, wipe it clean with a soft, slightly damp cloth, and use a detergent to clean the stubborn stains on the lamp port.

2.Clean the outside of the bath bomb.

3.After the bath bomb and bulb have dried, reassemble them and check that they are working properly.

Usually pay more attention to the cleaning and maintenance of the bath bomb, you can make the bath bomb last longer

1: Check whether the tungsten filament inside the heating bulb is broken.

2: Whether the lighting function on the bath bomb is normal, if the light switch can be normal, the ventilation and light heating switch do not work.

Then you open the switch box of the bath bomb, and change the live wire that was originally connected to the ventilation button to the light switch, if the ventilation can work normally, it means that the ventilation switch is broken, if it still can't work, it may be that the motor or capacitor of the ventilation is burned out or the live wire of the ventilation is burned.

The direct way is to find after-sales.

Bath bombs have become an indispensable electrical appliance in people's daily life, and with the increase of users, the number of failures has also increased significantly, which has brought great inconvenience to the daily life of users. Midea's bath bomb maintenance point is that the maintenance personnel have a grade certificate issued by the Ministry of Labor of the People's Republic of China, and have many years of work experience accumulated in maintenance.

Inquire about the store where you bought this bath bomb.

If it is**, find a local beauty store.

Many homes install it above the bathtub or shower so that it looks like it heats up quickly in winter but is a safety hazard. Because infrared radiation lamps heat up quickly, they are easy to burn the human body if they are too close. The correct way to do this is to install the bath bomb in the center of the top of the bathroom, or slightly closer to the bathtub, which is both safe and maximizes functionality.

It is forbidden to spray with water when working Special attention should be paid to when using: although the current bath bombs are waterproof, but in actual use, you must not splash with water, although the waterproof bulb of the bath bomb has waterproof performance, but the metal accessories in the body can not do this, that is, the metal in the body is still conductive, if splashed with water, it will cause dangers such as short circuit in the power supply. Don't turn off the bath bomb immediately after bathing, and wait for the moisture in the bathroom to drain before turning it off; It is also necessary to keep the bathroom ventilated, clean and dry frequently to prolong the life of the bath bomb.