How should you calculate the square number when tiling?

The same goes for the wall, the places glued to it are counted, so only the area of the doors and windows is deducted, which is rectangular = length * width. It's simple, but the walls are the same, it's just a bit high. Wall tiles are calculated by multiplying the total width of the surrounding walls by the height of the tiles (generally the ceiling).

height prevails). The area of the window should not be deducted, but the area of the door can; The area of the floor tiles is calculated by multiplying by the length and width of the bathroom floor. There will be a certain loss of tiling, so the margin will generally increase by 5%.

As for the amount of labor required for paving, it depends on the size of the toilet area, the difficulty of construction and the skill level of the workers.

There are differences in tiles of different materials**. When consumers choose ceramic tiles, they should understand what ceramic tiles are mainly used in and what their main uses are. Only then will you understand what style and performance of tiles you want to choose.

For the bathroom, it is better to choose tiles with good non-slip properties, and for the living room and bedroom, it is necessary to pay attention to the beauty and decoration of such places. It is better to choose glazed tiles.

and microcrystalline stone bricks. Aesthetics, more classy. After buying tiles, look for the best construction team.

How much does a tile cost a square? Although the quality of the tile is more important, the owner cannot take the quality of the tile as the only selection criterion, it depends on the construction technology and skills of the renovation team. If they don't have any experience, it's better not to choose.

**High-tech good can be selected. If there are only those high-quality ceramic tile construction teams, it is better not to choose. This algorithm charges per square meter, but it is often rounded when calculating the number per square meter, so the accuracy of the total number of tiles is prone to decline.

Some businesses will add a conversion factor due to tile joints, which may increase the error. This algorithm divides the entire tile area by the area of a single tile, which is more accurate than the above algorithms. If the decimal point appears last, it should be rounded up.

In addition, due to the different configurations of furniture and facilities, different spaces can affect the consumption of bricks, so this part of the area should be subtracted when calculating the paved area. For example, the walls and floor tiles of the kitchen should be covered with cabinets, doors and windows, and the bathtub, shower room, doors and windows should be removed from the bathroom.

Tiles will have varying degrees of wear. If you don't have enough spare tiles in stock, it's easy to find products of the same batch and color when you don't have enough to buy them. Therefore, when calculating the consumption of ceramic tiles, it is necessary to add the loss rate.

The specific formula is as follows: the amount of tiles required for decoration = decoration area per tile area [1 + (loss rate)] Generally speaking, it is normal for the overall wear rate of tiles to be between 3% and 10%. If it is paved with a special shape, the wear rate is relatively large, so the percentage of the wear rate should be increased accordingly when calculating.

Measure the wall directly.

The wall tile paste must be firm, and the hollowing rate must be within 3%. There are no defects such as skew, missing edges and cracks. The surface of the wall tiles should be smooth and clean, the color and luster should be coordinated, the pattern arrangement should be reasonable, and there should be no discoloration, alkali, stains and significant gloss damage.

The brick joints are densely filled, straight, uniform in width and narrowness, consistent in color, and the overlap direction at the yin and yang corners is correct. The use of non-whole bricks is appropriate and straight. The reserved holes are the correct size and the edges are neat.

Check that the flatness error is less than 2 mm, the vertical error of the façade is less than 2 mm, the joint height deviation is less than 2 mm, and the straightness is less than 2 mm.

It's as simple as multiplying the tile area by the number of tiles, plus the number of fragments used. Of course, if the living room, bathroom, and bedroom are not the same, then they are counted separately.

I think when we are applying tiles, if we want to calculate the square number more accurately, we should first calculate the area of a tile, and then multiply it by how many tiles?

In fact, there are about three ways to calculate the area of the wall: the first method is the actual area calculation; The second method is to use fixed coefficients for calculations, and the third method is to make estimates. There are differences between the three methods, but they are not very big.

The first method of calculating wall area is introduced.

1. Let's take a look at the specific rules of this calculation method. Specifically, we multiply the length and height of each wall of the space to get the product, and then add the product of each wall to get the overall wall area; Then you need to calculate the area of various openings such as doors, openings, window openings, etc. The total area of the applicable wall minus the area of the opening is the area of the wall we need.

2. Let's take an example. For example, a house with a floor area of 100 square meters. The area of all the walls is about 310 square meters, and the area of the door and window openings is about 50 square meters, so the calculated wall area is 260 square meters.

Introduction to the second method of calculating wall area.

1. First of all, let's understand the basic calculation rules of the second calculation method. This calculation rule also uses the same approximation method, but it is more accurate than the third method. To calculate, we need to multiply the total area of the house by a fixed factor, so that we can get the area of the wall we need.

If it is calculated according to the construction area, the fixed coefficient is generally taken. If calculated according to the area in the sleeve, the fixed coefficient is generally taken as 3. Of course, this is calculated according to the floor height.

2. Let's take an example to calculate. Let's also take a house with a floor area of 100 square meters as an example. So if you calculate according to the floor area, then it is 100 square meters multiplied, which is equal to 250 square meters.

Of course, it can also be calculated according to the area of the suite, the area of the suite at this time is basically 80 square meters, at this time, it is about 240 square meters by multiplying 80 square meters by 3. The error here is the error between the area of the suite and the building area, and we need to actually check it.

This is an introduction to the third method of calculating wall area.

1. Let's take a look at the third calculation rule. The calculation rule of the third calculation method is very simple, which is to use the floor area of the house multiplied by a factor, then subtract 10, and then multiply the result by 3 to calculate.

2. Let's also take an example to calculate. Let's still take a 100 square meter house as an example. Then the area of the wall of the 100 square meter house should be the result (100, and the result obtained is also 240 square meters.

Hello dear! Tile area calculation formula 1: Before buying tiles, you must calculate the area that needs to be paved with tiles, and the general area measurement can be obtained, and the method can be calculated as shown in the table below.

The total number of pieces = tile paving area (square meters) (the length of a single piece of tile The width of a single piece of tile) Formula 2 for calculating the area of a single piece of tile: First of all, ask the tiler to measure the total length of the waist line that should be attached, and the calculation method is: total number of pieces = total length of the waist line The length of the single piece of waist line is as follows:

The length of the waistline is 10 meters, and the specifications of the waistline selected are 80mm and 3mm bricks. Total number of pieces = 10m 33m = pieces) after the decimal point is generally calculated by rounding up, so the result is 31 pieces, buy 1-2 more pieces. When estimating **, you can estimate by square meters, but when it comes to buying tiles, you must confirm the number of pieces with the merchant, so as not to let the merchant play the algorithm and unconsciously bluff your money.

Tile area calculation formula: three-wall floor tiles are mainly used in living rooms, kitchens, bathrooms, balcony walls, floors and local background walls. Before purchasing, you should confirm the square meter or number of tiles required, and there are two ways to obtain data. One is to provide the quantity according to the foreman's measurement, and the other is to need us to calculate it from the floor plan:

Floor tile area = length and width (1+5% loss); Wall tile area = perimeter height (1+10% loss); Number of pieces Area Area of a single piece; The number of pieces of waist line = circumference The length of the waist line + the number of pieces of 1 tile is determined by the customer, and in general, one wall is one. When determining the number of wall and floor tiles, try to leave the loss, so as to avoid the occurrence of many times ** phenomenon and the color difference caused by many times, and the excess bricks can be returned if they are not soaked in water and not damaged. When ordering, the product specifications, models and use locations should be marked.

1. Calculated according to the number of blocks:

Decoration area Area per tile [1 3 (amount of loss)] The amount of tile required for decoration.

2. Calculate according to the area

The square number of tiles required for decoration 5 Scraps 5 Balance = The amount of tiles required for decoration.

3. Calculate according to the amount of auxiliary materials for paving tiles

The auxiliary materials used in paving tiles are: ordinary cement, white cement, medium sand, 107 glue, etc., and 11kg of ordinary cement, 33kg of medium sand and 2kg of lime paste are required per square meter when paving wall tiles.

Floor tiles need 34kg of ordinary cement medium sand and white cement per square meter.

The general floor tile area calculation is the total number of tiles is equal to the area of the tile divided by the length of the monolithic tile into the width of the monolithic tile, such as 50 square meters of tiles he is the total number of pieces = 50, when calculating the number of tiles, you should pay attention to the unity of the unit. Then when the decimal point is encountered, it is generally calculated by rounding, so it is a total of 606 pieces.

The settlement of paving tiles is calculated by multiplying the length by the width and deducting the area of the doors and windows. I hope my answer can help you.

1. The area of tiles: generally the area of the ground and the wall is added, and the area of the doors and windows can be deducted; Some window area is not large within square meters), the corner tile is more complicated, do not deduct the area of the window, because the master sticks it up to touch the corner, more labor-intensive;

2. As for the area of the purchased tiles, it is generally 6% more in advance, because there is a loss when tiling.

It's long by wide, and then reserve about three flat drills.

Measure the height and width of each wall, draw the grid on it, add 5% of the loss, 100 tiles plus 5 pieces, because to cut, plus the loss caused by transportation or cutting, the kitchen and bathroom corners are more, so the loss is more, for example, the width of your tiled wall is meters, and the height is. The length and width of the tile is 30 60, those 60cm 6 30cm is equal to 3900cm, then the whole wall will use 7 tiles long (no half tile, only the whole piece, the meter length needs to use a piece of tile, the piece will be cut with a complete piece), 9 tiles high, a total of 6 9 = 54 pieces.

And so on, when calculating the floor, first measure the size, make a floor plan, and then you can calculate it.

Calculated by the number of blocks:

Decoration area Area per tile [1 3 (loss)] The amount of tiles required for decoration is calculated according to the area:

The square number of tiles required for decoration 5 Scraps 5 Balance = the amount of tiles required for decoration and the amount of auxiliary materials for paving tiles.

The auxiliary materials used in paving tiles are: ordinary cement, white cement, medium sand, 107 glue, etc., and 11kg of ordinary cement, 33kg of medium sand and 2kg of lime paste are required per square meter when paving wall tiles.

Floor tiles per square meter need ordinary cement, medium sand 34kg white cement, and the model of ceramic tiles is cleverly selected.

Nowadays, the house adheres to the design principle of "three large and one small", so many householders have a large living room with an area of about 20 square meters. The room area is large and generally can be decorated with large tiles, generally more than 20 square meters of rooms can be selected with 600 600mm floor tiles, 10-20 square meters of rooms can be used 500 500mm floor tiles, and 10 square meters of rooms can be selected with traditional 300 300mm floor tiles. The use of large floor tiles not only reduces gaps in the floor, but is also aesthetically pleasing and durable, and overall economical.

The actual area is divided by the area of the individual bricks. For example, if the bathroom wall is 23 square meters and you want to use 300x600 tiles, the actual number of blocks used is: 23. Here's the estimate.

First of all, measure the area of the place where you want to paste tiles is generally rectangular (length * width), if it is irregular, first draw the drawings of the tiles to be pasted, and then split it into several relatively simple figures to measure the size, such as triangles, trapezoids, etc. Then according to the size of the tile you want to buy, for example, it is 80*80 specifications, and the area is squared. Divide the area of tiles by the number of tiles you are asking for.

Tiles come in a variety of styles and styles, and they are easier to take care of, so many owners will pave tiles on the ground and walls. However, when we lay tiles, we must first determine the paving area and number of tiles, so how to calculate the square number of tiles? Next, I will briefly introduce it to you.

According to Qeeka Home experts, when you are pasting tiles, if you want to know what the area of tiles you need to pave. Then we can use tools such as a tape measure to measure the length and width of the floor and wall to be tiled. Once you have calculated the area of the floor and wall according to the formula, you can add these areas together.

If we want to know how many tiles we need to buy, we divide the area of the tile by the area of the tile. After calculating the total number of tiles, don't forget to add the loss of tile paving, which is generally calculated according to 6-8%. For example, if we pave a 25-square-meter living room with 800*800 tiles, then the number of tiles required is 25 (pieces; The loss is about 3-4 pieces.

To pave a 25-square-meter living room, you need about 43-44 pieces of 800*800 tiles.

When you buy tiles, if you don't know how many tiles you need to buy, you can also ask the staff of the tile store to help calculate. When you buy tiles, you should pay attention to the type of ceramic tile. There are various types of tiles on the market, and we can choose different types of tiles according to the place and area of the tiles.

For example, the bathroom area is small and relatively humid; You can choose non-slip, waterproof effect of the whole body brick and so on.

When we buy ceramic tiles, we also need to pay attention to the brand of ceramic tiles. The more well-known tiles on the market are Dongpeng tiles, Mona Lisa tiles, Nobel tiles, Eagle tiles and so on. Buy ceramic tiles can shop around, on the premise of ensuring product quality, choose cost-effective tiles.

When purchasing ceramic tiles, the style of ceramic tiles should be considered according to the interior decoration style.

Summary: About how to calculate the square number of tiles, I will briefly introduce it to you here. I hope that after reading this article, I can provide reference and help for Daliangsenjia when purchasing tiles in the future.