How to make baby winter shoes, how to wear baby winter shoes

First of all, we cut out two templates according to the size of the child's feet, one is the sole, the other is the upper, we make a relatively simple cotton shoe, pay attention to cut a little larger, because after sewing, the size will be slightly smaller.

Compare the model of a sole cut out of the template just made, use the fabric we prepared, cut out a sole, and then arrange the cotton into a flat one, and lay it flat on top of the cut fabric, note that the upper and lower layers are used here. Fill the cotton flat between the two layers.

In the same way, the fabric is trimmed into an arc according to the pattern of the cut upper, and then the cotton is spread flat between the two layers of fabric, and then all the sides are sewn together using a needle, and the two layers of fabric and cotton are sewn together. Sew a few more layers so that it is not ventilated.

Align the sewn sole and the shoe face together according to the edges, we can align the two tails and stitch them, and then leave a gap, and then turn them over after the whole stitch is completed, so that the two tails that were just stitched are displayed on the inside, and the suture is also displayed on the inside.

After it is done, take a small piece of leftovers, fold it repeatedly like a folding fan, and then sew it in the middle position so that it forms the shape of a bow, and then sew the sewn bow on the upper of the shoe as a playful ornament.

According to the above method, sew two cute cotton shoes, because the child is more active, often kicking feet, we had better use excess fabric, sew two straps on both sides, so that the child even if naughty back and forth kicks, the shoes will not fall off.

How to keep baby's feet warm in winter.

Traditional Chinese medicine pays attention to protecting the heels, because there is now a health boom, people are more and more concerned about their bodies, especially for children, but other health care methods usually do not work in the baby, so parents thought of letting the baby protect the heel in winter, so how to keep the baby's feet warm in winter?

If the indoor temperature is relatively hot, it is okay to wear ordinary socks for the baby, especially the baby who has not yet learned to walk, and now there are shoes and socks on the market that are also very suitable for small babies, which are very warm after wearing, and do not delay the baby to learn to walk, and there are many thick socks with fleece that are very suitable for children.

If the indoor temperature is particularly cold, you should buy shoes for your baby, and buy suitable shoes or shoes and socks according to the baby's age. If the baby is still in confinement, you can cover the baby with a relatively thick quilt, because the baby can't walk at this stage and is lying down every day, so it is okay to protect the child at a normal body temperature.

When buying shoes for the baby learning to walk, it should be noted that the shoes should not be too heavy, too heavy will not help the baby learn to walk, and it will also make the baby feel very tired, you should choose soft shoes, especially the soles, which need to be relatively soft, so that you will not feel unable to lift your feet when walking.

Here's how to knit baby shoes by hand:

1. Sole: 8 needles from the closed source hole, weaving flat needles back and forth, the first needle in each row can not be knitted, and a needle is added on both sides of the first round trip, a total of ten needles. Add a needle on both sides of the second round-trip, a total of 12 needles, do not add or subtract 8 back and forth, add a needle on both sides of the ninth back and forth, a total of 14 needles, do not add or subtract 9 back and forth, start to reduce the needle, subtract one needle on both sides of each back and forth, reduce to 8 needles to close the needle.

2. Pick the needle: leave two needles on each side of the toe. Pick the braid stitches all the way to the end of the shoe, 25 stitches on each side.

3, piece weaving: or weaving back and forth flat needles, each line of the first needle picked down not weaving, first with yellow thread weaving two back and forth, the third back and forth start, the front of this row on both sides of the subtract a needle, the reverse side does not add or subtract, change the brown thread weaving three back and forth and then change the yellow thread weaving 3 sedan back and forth, and then change the brown thread weaving 2 back and forth, reduce the needle square crack with the yellow line, or each back and forth on both sides of the subtraction of a needle on a total of 9 needles, remaining 16 needles.

4. Pick 10 stitches on the toe cap.

5. Sheet weaving: 12 back and forth weaving without adding or subtracting, and then stitching the front piece and both sides of the stitch, and the single thread on it is turned out and sewn into two layers.

Baby shoes practice, 1 to prepare materials: shoe surface (about 38x32cm cotton cloth), shoe lining (double cotton gauze about 38x32cm), 2 groups of snaps, 2 buttons.

2. Cut out 2 pieces of surface cloth and lining cloth for the sole and upper according to the paper pattern, and 2 pieces of table cloth for shoelaces.

3. Start sewing the heel, using the stitch method of sewing one needle and one back stitch, so that the sewing is stronger.

4. Ironing the sewn heel with an iron.

5. Stitch the cloth of the sole and upper of the shoe, and the round part of the toe is vacated first.

6. The toe cap part of the upper is sewn with thread first, and the length is adjusted to the same length as the sole.

7. Then sew the cloth of the upper and sole together, that is, the toe needs to be threaded twice.

8. The white cotton yarn on the inside of the shoe is also sewn in the same way as the shoe table.

9. Turn the surface cloth of the shoe into the surface facing outward and stuff it into the lining cloth.

10. Stitch the upper part of the shoe, leave about 3cm of space on the side, and keep it for when turning over, noting that the direction of the left and right feet is different.

11. Turn the shoes over after sewing.

12. Press one end of the shoelace inside, fold it according to the appearance of **, iron it with an iron, sew it, and sew it in the gap between turning the shoes.

13. Finally, put all the buttons and snaps on.

This pair of baby shoes is finished.

The practice of simple baby shoes is as follows:

Sole: 8 needles, knitting needles; Then add 1 needle in turn, continue to knit the next needle (i.e. knitting washboard needle), add one needle in each row, knit to 16 needles (you can also add or subtract needles according to personal needs); Then weave 40 rows without adding or subtracting; After weaving, subtract 1 stitch per row until it reaches 8 stitches.

Shoe body: Pick the needle along the perimeter of the sole, and then separate it in half, the front half is knitted 2 up and 2 down, and the second half is knitted with washboard needles, knitting 20 rows high.

Upper: After the first half is knitted in 20 lines, wear it with thread and tie it tightly. Continue to weave the second half, and weave to the junction with the first half of the joint, you can pick a few stitches to knit together, so that the shoes look good, until you knit to the height you need, and then turn down.

Hairballs: Use a tool to make the wool balls and add them to the toe cap. So a warm pair of baby shoes is complete!

Cotton thread: Cotton fiber is probably the most widely used fiber in the apparel industry. The cotton bright back to the beard fabric is breathable and sweat-absorbent, but the elasticity is poor. In addition to multi-strand cotton threads, there are also cotton ropes, hollow flat belt cotton, and other types of cotton threads used for weaving.

Cotton rope: the shape is the same as the velvet, there are thick and thin, thin and fine velvet is about the same thick, suitable for summer weaving short sleeves or crochet clothes, the texture is relatively soft, you can wear and knit clothes for the baby, and it is better than the general cotton thread with multiple strands, and there will be no oblique or leaky weaving.

Hollow flat belt cotton: There are also thick or thin points, and the effect of weaving is similar to that of cotton rope, but it will be a little thinner than the same thick cotton rope. In addition, because the flat belt is hollow and breathable, it is perfect for weaving summer clothing.

But the disadvantage of the flat belt is that it is loose and easy to sag.

Twine: Hemp fiber is the earliest textile raw material used by human beings to make clothing.

Wool is mainly divided into: cotton thread, hemp thread, plush thread, and silk thread.

1. Find the cut drawing of the shoes on the Internet, draw it on the paper according to the size of the cut drawing, and prepare the table cloth, lining cloth and cotton spreading, and then cut out the shoe shape according to the size of the paper.

2. Sew the 4 pieces of stumbling cloth opposite each other except the bottom edge, and cut them along the tooth cut. Ironing the front with an electric iron to make two stumbling blocks.

3. Iron the cut surface cloth of the shoes and spread cotton, but remember not to sew the cotton, and sew the table cloth with the heel. It is to sew shoes, try to sew two shoes together, do not finish one and then make the other. After sewing, turn the inside of the shoe to the front, put it into the upper of the table cloth made earlier, and then sew it along the collar and fix it with a back needle.

4. Return to the heel, open the seams of the table cloth and lining cloth, cut the tooth mouth at the arc of the shoe mouth after sewing, turn it over after cutting, and then sew it along the edge.

5. Iron the surface cloth and lining cloth of the sole with cotton, and align the sole with the upper, sew a circle and fix it.

6. Cut the tooth mouth with the beveled edge sewn before, and then sew the sewing part to the cotton on the sole with a rolling needle, remember not to sew it on the lining.

7. Iron the surface cloth of the sole and spread the cotton, cut the teeth along the sole, sew the seam to the cotton of the sole along the suture line, and then sew the sole with a hidden needle.