Why bathroom wall tiles are not all porcelain

Because the water absorption rate of all-porcelain is not high, cement mortar is used.

It is not easy to stick to the wall, even if it is pasted, it is easy to fall off, and if you use glue with a high degree of adhesion, you will face the problem of not being environmentally friendlyTherefore, when tiling the wall in the bathroom, semi-porcelain is usually chosen, so that it can be directly paved with cement mortar.

The tiles in the bathroom should have a certain waterproof performance, because we often wash our faces and baths in the bathroom, and a lot of water vapor will gather in it. If the tile has a high water absorption rate and is not waterproof, then water vapor can easily penetrate into the inside of the tile, which will make the tile expand and deform, affecting the aesthetics.

Because all-ceramic tiles will be slippery and unsafe. And because of the all-ceramic tiles, the wall and the ground need to be paved with glue, which is relatively not environmentally friendly, and the water absorption rate is less than or equal to the porcelain glass fossil, and the water absorption rate is relatively small.

Compared with non-full tiles, the water absorption rate of full ceramic tiles is relatively low, the grade is higher, and the texture looks natural and generous. Non-full ceramic tiles are relatively more varied, wear-resistant, generally speaking, non-full porcelain ** is lower, except for special shapes, of course.

For families, both types of bricks are fine, but they are just different according to their financial abilities or needs. Full tiles are generally not used in the bathroom, and the anti-slip effect is not good.

The reason for not using all-porcelain is that there is often stagnant water in the bathroom, which is not conducive to porcelain tiles, and porcelain tiles have no anti-fouling wax, and their anti-fouling properties cannot be guaranteed.

The floor of the bathroom is paved with all ceramic tiles, because the all-porcelain tiles have the characteristics of high hardness, not easy to break, high anti-fouling performance, low water absorption and good flatness. Some people say that the anti-slip performance of all-ceramic tiles is not good, but in fact, there are special all-ceramic anti-skid tiles for toilets on the market, which can effectively solve the problem of anti-slip.

The semi-ceramic has poor water resistance and easy penetration, so it is not suitable for laying the bathroom floor, but the semi-porcelain is easy to put on the wall and can be used to pave the wall of the bathroom.

Use all porcelain, because this will reduce the water absorption, and it is not easy to stain the wall, and it is also very easy to clean, and it will look more tidy.

Dear!The bathroom wall tiles are all tiled!

Dear!The bathroom is good with all porcelain. The water absorption rate of all porcelain is very low, and it can be paved without soaking in water, but the semi-porcelain also has to be soaked in water for construction, as if the red brick is not burned through, and the cut surface of the brick is not the same, and it is not the same.

All ceramic tiles are vitrified tiles, all porcelain, non-absorbent, strong anti-fouling, specification *600. All-porcelain ceramic tiles have high hardness, not easy to break, high anti-fouling performance, low water absorption and good flatness. Semi-porcelain tiles have low hardness, easy to break, easy to penetrate, and poor gloss.

Semi-porcelain should be chosen. Because the semi-tiles are not easy to fall off, they are not easy to hollow, and they are relatively cheap, especially suitable for bathroom decoration.

When the kitchen and bathroom are renovated, many people are very confused, wall tiles, all porcelain or half porcelain? This depends on personal hobbies and financial strength.

Dear, I am happy to answer for you: bathroom wall tiles are good porcelain or ceramics Answer: dear, wall tiles in the bathroom of course use all porcelain, the toilet often uses water, with all-ceramic water will not penetrate the wall regret buried in the wall, protect the overall wall will not be moldy.

Artificial small blocks used in construction, divided into sintered bricks (mainly referring to clay bricks) and non-sintered bricks (lime sand bricks, fly ash bricks, etc.), commonly known as bricks. Clay bricks are made of clay (including shale, gangue and other powders) as the main raw material, which is processed by mud treatment, molding, drying and roasting. In the Spring and Autumn Period and the Warring States Period, China successively created square and elongated bricks, and the technology and production scale, quality and fancy varieties of brick-making in the Qin and Han dynasties have developed significantly, and they are known as "Qin bricks and Han tiles".

The standard specifications of ordinary bricks (solid clay bricks) are 240 mm, 115 mm, 53 mm (length, width, thickness); Porous clay bricks vary according to the situation of each region, such as KP1 type porous clay bricks, whose external dimensions are 240 mm, 115 mm, 90 mm, and the thickness of the exterior wall is generally 240 mm or 370 millimeters. According to the size of the compressive strength (Newton square millimeter, N mm), it is divided into 6 strength grades: MU30, MU25, MU20, MU15, MU10, and MU10. Clay bricks are made of local materials, cheap, durable, and have the advantages of fire prevention, heat insulation, sound insulation, moisture absorption, etc., and are widely used in civil engineering and construction projects.

Kitchen and bathroom decoration, wall tiles with all-porcelain or semi-porcelain?

It's better to stick a half-round Hu tile. The hardness of the whole tile is too high, and it is easy to crack when the cabinet needs to be drilled on the wall in the later stage, in addition, the water absorption rate of the whole tile is less, and some even do not absorb water, so the adhesion with the cement is relatively poor, and the possibility of falling off for a long time will be relatively large, which is not safe, and the water absorption rate of the half tile is higher, which is suitable for use in the kitchen with a humid environment.

Because the water absorption rate of all-ceramic is not high, it is not easy to stick to the wall with cement mortar, and it is easy to fall off even if it is pasted. Therefore, when tiling the wall in the bathroom, semi-porcelain is usually chosen, so that it can be directly paved with cement mortar.

The difference between the bathroom floor tiles with all-porcelain or half-time is that the water absorption rate of the two is different, the water absorption rate of the whole tile is less than, and the water absorption rate of the tile is greater than. In addition, the whole ceramic tile is vitrified brick, its anti-fouling ability is particularly strong, and the hardness is particularly high, not easy to break the problem, the variety is particularly good, and the gloss is also very strong. The water absorption rate of semi-ceramic tiles is good, but it can only be constructed after soaking in water.

Answer: All-ceramic tiles for the kitchen are not good. Because all-ceramic tiles, whether it is wall paving or floor paving, need to use glue. We know that even if it is environmentally friendly glue, it will contain harmful substances such as formaldehyde, but it is just a matter of whether formaldehyde exceeds the standard.

But for a place like the kitchen, where food is made, if the environmental protection of the tiles needs to be determined, how to ensure the hygiene of the food consumed? Therefore, it is not good to choose all-ceramic tiles. Secondly, the difference between all-ceramic tiles and ordinary tiles:

1. From the point of view of water absorption, the water absorption rate of all-ceramic tiles is about and about, and the water absorption rate of semi-porcelain tiles is about and about, so the water absorption rate of all-ceramic tiles is relatively low. 2. From the perspective of tile hardness, the ductility of all-ceramic tiles will be reduced after heating, and its water absorption rate is also low, so its hardness and stain resistance are relatively strong, so it is not easy to break. The elongation and water absorption of semi-porcelain bricks are just opposite to those of all-porcelain bricks, so their hardness is naturally low.

In short, semi-porcelain is recommended for kitchen wall tiling.

The function of the two kinds of tiles is different, there is no specific good or bad, which tile is used in the bathroom depends on the use needs of the householder.

Here are the pros and cons of both types of tiles::

Semi-porcelain wall tiles: advantages: good flatness, strong stain resistance, cheap and easy to process.

Disadvantages: Poor waterproofing.

All-ceramic wall tiles: advantages: high hardness, good flatness, strong pollution resistance, not easy to break, low water absorption, good waterproof effect.

Disadvantages: Slightly more expensive than semi-porcelain wall tiles.

Summary: Semi-porcelain wall tiles are suitable for families with low economic level or no excessive requirements for tiles, and all-ceramic wall tiles are suitable for families with high requirements for tiles or good waterproof effect.

Of course, the all-porcelain is good, the main difference is in the low water absorption rate and aesthetics, but the semi-porcelain is also sufficient.

It is best to choose a full tile for the bathroom floor. The color of all tiles is uniform, the surface and the back are the same color, and the porcelain quality of semi-porcelain is relatively poor, and the sound of percussion in the air will be more muddy. Compared with full ceramic tiles, ceramic tiles are better, with high hardness, not easy to crack, low water absorption, and flat; Semi-tiles generally have poor water resistance, are easy to penetrate, and are not suitable for laying on the ground.

It is very suitable to be pasted on the bathroom wall. Because it is a façade, even the water has to flow away, so the wall of the bathroom can still be semi-porcelain.