Is there a difference between the tiles of the bathroom and the tiles of the kitchen?

Common flooring: quality identification tiles, polished tiles, ceramic tiles, glazed tiles, bricks, bricks, special printing anti-acid resistant tiles floor tiles are very professional, remind you: > the color of the fuselage is pure to view the tile.

The trick is very simple, mainly to observe whether the color of the back of the tile is uniform and consistent. High-quality tiles, uniform green color, symmetrical. 2. Observe whether the thickness of the cross-section of the tile is good.

Consumers should note that the cross-section mentioned here does not refer to the cut surface around the tile, but to the fractured fragments of the tile. In general, the rest is fine, crispy, consistent color top. Due to the strong waterproof ability of ceramic particles; And the particles of ceramic tiles are large, and the water is easy to soak, which affects the quality.

3. Pay attention to the thickness of the glaze layer. The entire surface of the glazed tile is tiled, and the thickness of the glaze is the cross-sectional thickness of the glaze. Glazed bricks are the most expensive material, and the thicker the glaze layer, the better the natural quality.

5. Test the water. Consumers can pour some water on the back of the tile and pay attention to the speed of water absorption. After a few minutes, then look at the water spots in front of you obviously.

After water infiltration, the density distribution of the brick layer is slow, and the water level is not obvious, which is the top grade. Sixth, take two bricks back to face each other, to see whether they can be in close contact or there is no large gap, you can judge whether there is warping.

Seven, look for ink on the face for an hour of scrubbing, see if there are traces of traces, is good brick, geometry has penetrated into the company does not choose.

Eighth, the deviation of the diagonal length and width of the two bricks bricks is not seen in the superior product of the bricks.

9. The inspection report issued can refer to the national or industry testing institutions provided by the merchant to compare these index data, water absorption, wear resistance, acid resistance and pollution index.

The kitchen is generally semi-porcelain or pottery, and the bathroom is all porcelain.

The main material for kitchen and bathroom decoration is ceramic tiles, and the size of tiles is also divided into various specifications. Different spaces choose different sizes of tiles, and the effect of decoration will be different. Let's introduce it to youKitchen bathroom tilesHow to choose the size?

What are some tips for choosing kitchen and bathroom tiles?

First, how to choose the size of kitchen and bathroom tiles.

1. Kitchen: It is generally recommended that the floor tile surface of the kitchen is smaller, and the main cost is lower, because the kitchen floor is easy to dirty, the tile specifications are smaller, and the brick joints are more difficult to clean. Ordinary families use porcelain tiles, with walls 300*450 and floors 300*300.

To make Qingsheng's high-end, they are all cut and processed with 600*600 or 800*800 polished tiles, except for European style.

2. Bathroom: The decorative materials of the bathroom wall and floor include glazed bricks, vitrified tiles and mosaics. Now the glazed bricks are commonly used in families, and the common specifications are 300 400mm, 300 300mm, and 250 330mm.

The general specification of wall tiles is *600. Bathroom wall tile size is the problem that needs to be paid attention to when choosing bathroom tiles, in actual operation, large-size wall tiles have the characteristics of convenient paving, good flatness, etc., while small-size bathroom tiles have the characteristics of good decorative effect and enlargement of the sense of space in the bathroom. In the case that the bathroom is not very large, you should choose 300 * 300 specifications, because the bathroom floor needs to find the slope, the floor drain is at a low point, and the shower or laundry water can flow smoothly, so you need to use a single floor tile with a small area.

Second, what are the skills to choose tiles.

1. Check whether the color of the tile is pure. Mainly observe whether the color of the back of the tile is uniform and consistent.

2. It is necessary to observe whether the particles of the cross-section of the tile are delicate.

3. Pay attention to the thickness of the glaze layer. The thickness of the glaze layer is the thickness of the cross-section of the glaze. Glaze is the most expensive material in the cost of ceramic tiles, and the thicker the glaze layer, the better the quality.

4. Listen. Tap the tile to pay attention to whether the sound is crisp, such as the sound is clear and pleasant, such as the sound is dull, it is inferior.

5. Test the waters. Consumers can pour some water on the back of the tile, and pay attention to the speed of water absorption of ceramic tiles. After a while, see if the marks left by the water on the front are obvious. The density of tiles that infiltrate slowly after the water disperses is large, and the marks left by the water are not obvious, so they are regarded as the top grade.

The above is a detailed answer about kitchen and bathroom tiles, I don't know if you are satisfied with our introduction.

When decorating, the kitchen and bathroom are always the highlight, although it is not like the living room needs luxury decoration, but it is absolutely important in terms of function! Especially for the decoration of the wall, tiles are generally used for laying, so what is the effect of the same tiles in the kitchen and bathroom? What are the advantages?

The wall of the kitchen and bathroom must be laid with tiles, which can prevent moisture and moisture, after all, the kitchen and bathroom use a lot of water, which is easy to cause damage to the wall. But by laying tiles, you can reduce such troubles, as well as unnecessary losses!

If the kitchen and bathroom tiles are the same, there is no difference in the use effect! The walls of the kitchen and bathroom are basically afraid of moisture, and it happens that the kitchen and bathroom are places where water is relatively large, it is inevitable that there will be water splashing on the wall, and the ordinary wall will be damaged if it is stained with water, but the tiles will not have such a situation, and the waterproof effect is very good! Secondly, when the kitchen and bathroom are in use, there will be water vapor in this environment, and the ordinary wall will also be damaged.

Therefore, the kitchen and bathroom walls are laid with tiles, and the effect is very outstanding!

Tiles can not only be used for floors, in fact, kitchen and bathroom walls are also very suitable for tiles. The performance of ceramic tiles for kitchen and bathroom has many advantages, such as waterproof, moisture-proof and moisture-proof tiles, light weight, acid and alkali resistance, earthquake resistance, crack resistance and good compatibility with external thermal insulation systems, and other advantages are very good! As the design is becoming more and more fashionable, the pattern color of the tile is becoming more and more fashionable, so it is more and more widely used!

Ceramic tiles in the production line, abandon coal and heavy oil and other highly polluting raw materials, the selection of electricity and solar energy, and strive for environmental protection and safety, in the production process there is no wastewater, waste gas, dust emissions, all waste materials can be reused, so ceramic tiles are very environmentally friendly and healthy from production, or to put into use! Compared with those products that can release toxic substances such as formaldehyde, ceramic tiles can be more reassuring in use!

The kitchen and bathroom tiles are the same, in fact, there is not much difference in use, basically the use effect is the same, and does not affect human health, it is a building material that is worth choosing!

You can get it for free

Yes, but generally only the rental house is easy to do, it is best to distinguish and choose different bricks according to your decoration style.

1. If the tiles in the kitchen and bathroom are exactly the same, there is no novelty and it will be boring for a long time.

2. The bathroom is the place with the most water accumulation, so it is necessary to choose tiles with non-slip and good water absorption. Therefore, the floor of the bathroom should be laid with floor tiles with low water absorption.

3. Use slightly dark-colored non-slip tiles for the bathroom floor, so that it doesn't look easy to get dirty.

4. Kitchen wall tiles are suitable for choosing bright glazed tiles, because this kind of brick is not easy to absorb oil stains and is more convenient to clean.

5. It is always inevitable that the kitchen floor is a little wet, so it is very important for the kitchen floor to be non-slip. Therefore, choose floor tiles with folded stripes or concave and convex points on the front to increase the friction between the floor tile surface and the soles of human feet or shoes to prevent slipping and falling.

6. The main thing is that the kitchen and bathroom must not be made the same, and there will be aesthetic fatigue after a long time.

In short, the floor of the bathroom and kitchen should be paved with floor tiles with low water absorption. Kitchens and bathrooms often use all-over bricks as floor tiles. The surface of the all-over brick is not glazed, and the material and color of the front and back are the same, hence the name.

This kind of brick is ground on the surface after firing, and it has good slip resistance and wear resistance, that is, it is generally said"Non-slip floor tiles"。

There are many kinds of tiles, there are bright light, matte, antique, general bathrooms and kitchens are made of ceramics, colors and styles are basically based on personal preferences, as for the specifications of most of them are now used 300x450, if the bathroom and kitchen are big enough, you can also use 300x600, it is recommended that the kitchen is light-colored or directly white, it looks clean, the bathroom can be selected according to personal preferences, the general sales tile exhibition hall has a model, the tile is mainly divided into all-ceramic vitrification and ceramic, The bathroom and kitchen can use ceramics, because the cost of all-porcelain is high and the troublesome construction master will not let you go to process, there is no need.

Indoor tiles are divided into wall tiles and floor tiles according to the location of paving. Strictly speaking, wall tiles belong to ceramic products, floor tiles are usually porcelain products, their physical characteristics are different, the two are very different from the selection of clay ingredients to the firing process, the water absorption rate of wall tiles is about 10%, which is several times higher than the floor tiles with a water absorption rate of only 1%. The floor of the bathroom and kitchen should be paved with floor tiles with low water absorption, because the floor will often be washed with a lot of water, so that the tiles can not be affected by water vapor and do not absorb stains.

The wall tile is glazed ceramic, the moisture content is relatively high, and its back is generally rough, which is also conducive to the adhesive to stick the wall tile on the wall. Floor tiles are not easy to stick firmly on the wall, and wall tiles will absorb too much water on the ground and become difficult to clean, so it can be seen that wall and floor tiles cannot be mixed. As for the ratio of cement sand, it is probably like this:

The wall tiles are 1:3, the floor tiles are 1:2, and the cement number of the cement is the number cement.

In order to avoid waste and maintain the coordination of space, small tiles should be selected, so that the waste of paving will be very little, and many inconveniences caused by construction such as large-scale tile cutting are avoided.

The operating environment of the kitchen is a high temperature environment, and the color of the tile should be based on light and cool colors, such as white, light green, light gray and other colors. Such colors will make people feel the breath and coolness of spring in high temperature conditions, and light tones can make people feel that the space is expanding and extending, avoiding the dull and oppressive feeling of dark tones in a small space.

Because there are a lot of cabinets in the kitchen, the back of the cabinet should not be tiled, because it is a waste to lay tiles in such a place that is completely obscured by the cabinets.

It is best to pave matte tiles, matte tiles will make people feel bad to clean, in fact, this is wrong, good quality matte tiles are not only very easy to clean, but also its delicate, simple luster can show the owner's elegant aesthetics, so that the taste between the kitchen is more harmonious and natural.

Avoid using a tile waistline, because the use of a waistline in a small space will make the space look cluttered and cumbersome, but you can properly pave a few pieces of tile tiles to embellish, so that the kitchen exudes a little vitality and romance.

It doesn't matter if you can use a better kitchen in the wall bathroom, you should use non-slip bricks on the ground, that is, the tiles are not mirrored or very smooth and flat, and it is best to use the better kind of full tiles, so that it is not easy to fall off the glaze. It is also difficult to break.

Ceramic tiles are generally divided into full tiles and ordinary tiles are good and bad, their difference is that the whole tile is not absorbent, so the glaze and strength of the whole tile is very high and durable, ordinary tile is the opposite, and at the same time tell you that the whole tile also has a water absorption rate is only very small, basically can be ignored.

It is best to use microcrystalline powder floor tiles 600mm*600mm to open two, pour two long corners, so that the kitchen and bathroom wall tiles are good-looking and durable! The color depends on the individual's own preference!

It's no problem at all, my family is like this, as long as you don't choose too flowery products.

It can be used, but the kitchen is generally made of polished tiles without leaving seams, so it is easy to clean and not accumulate dirt.

OK; But not absolutely.

The big color should be about the same. I can't have a bathroom that the kitchen is white.

Cracks in the exterior walls of the house can be caused by the insulation of the exterior walls. The developer's argument that the completion time is short and the wall is not dry and the renovation starts to cause the tile cracking and the door frame cracking is untenable, and the wall will not cause the tile to crack if it is not dry. The door frame should never have cracks under any circumstances.

The reason for the cracks may be the short completion time, the overall building settlement is not completely completed, if it is a high-rise building, this is a common problem, if it is a multi-storey building, it is a quality problem.