Is it good to tear down the original wall of the public restroom and put the wash basin outside the

It is good to remove the original wall of the public restroom and put the wash basin outside the bathroom. Placing the sink outside the bathroom will not only not affect the normal function, but will also be more convenient. Hand washing stations are used more frequently in the three key areas of the bathroom, and most homes install handwashing stations near the door of the bathroom.

Everyone's toiletries are put in the bathroom, and after a long time, I always feel that objects such as cotton towels will have a heavy smell, which is caused by the poor natural ventilation of the bathroom, long-term gas dampness and coldness, and lack of cleanliness and hygiene.

The handwashing station is connected to the outside, so you don't have to worry about the personal hygiene of the cotton towel, and it is very easy to dry after application. Put it outside, wash hands and disinfect, clean your face more conveniently, and some people in the bathroom are not harmful to the application. If you have a large family and are busy washing your face in the morning, you can set up a double face wash, one inside and one outside.

In addition, the washbasin is mostly a solid wood box, which can be placed outside to prevent moisture corrosion.

There is a large possibility that the washbasin is designed and decorated outside, and the ceiling ceiling is made of paper-faced gypsum board modeling, and there is no need to worry about water vapor problems. Thoroughly protect the water in the shower room, so that it is not easy for it to leak into the outdoor indoor space, so that the bathroom is dry, and then the elderly and children, including ourselves, are safer.

Because the toilet is the area that everyone has used many times, if we squeeze the handwashing station into the bathroom, it will feel very inconvenient, and it will also make people feel very congested, and the gas in the bathroom is very wet and cold, if it cannot maintain dryness, it will cause the handwashing station to grow mildew and grow germs, so the relatives in Guangdong Province will install the handwashing station outside the bathroom, so it can solve this problem well, and there is no need to worry about the situation that a family queues up to use the toilet during the morning rush hour, whether it is brushing teeth and washing face or urinating and defecating are not easy to affect each other。

I think this design is not very good, it will affect the overall sense, although it is very convenient, but it is necessary to modify the floor drain, the cost is more, waste money, so the modification is very unnecessary, affecting the overall design effect.

I think of course it is possible, but the smell of the toilet will be released to the outside, so it is not recommended.

I don't think that's good because it will break the tightness of the restroom and the smell in the restroom will be outside.

Because this installation method is also possible, so that the separation of dry and wet in the sub-region can be realized, in fact, there are certain benefits, if the wall of the bathroom is not a load-bearing wall, then it can also be removed, and the space of the bathroom can be expanded, the benefits are still a lot, and the design is also very good-looking.

This makes it easier to use, for example, when you need to wash your hands without having to run to the bathroom, which can also be used by multiple people.

Personally, I think it is very convenient to tear down the original wall of the public restroom and put the wash basin outside the bathroom, and it is also convenient for passers-by to wash their hands when they need to wash their hands.

<> The position of the washbasin in the bathroom cannot be changed arbitrarily. When digging back to buy a new house for decoration, there are often problems such as changing water and electricity, but some real estate developers do not recommend changing water and electricity, which will destroy some things designed by the developer, and there are some unknown problems, so the location of the bathroom wash basin can not be changed at will. If the location of the washbasin in the restroom is changed, it is necessary to consider whether it is affected by other plumbing.

This is not only difficult to engineer, but also may invest a lot of renovation funds.

It's quite reasonable, wet and dry partitions, and besides, if someone wants to go to the toilet in the morning, it won't affect the people who are washing outside. That's what I do with interior design now.

This design is a type of wet and dry separation.

Wet and dry separation is a popular design concept in bathroom design. With traditional bathroom equipment, there is always moisture everywhere after taking a bath, and the humid air stays in the bathroom for a long time, resulting in air pollution. Dry and wet separation includes handwashing station and bathroom separation; Or the separation of the shower area from the toilet and basin area.

Dry refers to the sink, wet refers to the bathroom.

Key Benefits: 1. Improve safety: it will not slip due to splashing on the floor;

Wet and dry separation toilets.

2. Increase the usable area: concentrate the water vapor locally, so that other places can be reused;

3. Extend the life of the equipment;

Main disadvantages: 1. The requirements for the area of the toilet are relatively high for the separation of dry and wet;

2. The cost is higher than that of traditional bathroom design.

No one will put it out there, and it doesn't make sense at all.

Unreasonable, do you come out to wash your hands after going to the bathroom?

It depends on your house type, and it is better to put it outside with a larger population.

This is called dry and wet separation, and only high-grade bathrooms are like this.

Bathroom waterproofing should be done well.

In addition to the basic waterproof work, the bathroom leakage is mainly the junction between the ground and the wall, which should be dealt with urgently, leaving no dead ends, and the waterproofing of the wall is best to be 180mm, which can not only eliminate water leakage, but also prevent water from wetting the wall.

Bathroom floor tiles need to be non-slip.

There is often water contact on the bathroom floor, the floor tiles should be selected well, non-slip, dense, easy to take care of, and the ground should be made along the wall to make a flow tank, so that there will be no stagnant water.

The bathroom must be separated from wet and dry.

If the area of the bathroom is sufficient, the separation of dry and wet must be done to avoid water splashing to other places, such as washing machines that are often splashed by water will also affect the service life.

Bathroom ceilings should be treated with anti-condensation.

The heat of the bathroom rises, and the cold wall on the top floor will condense into water droplets, which will also cause damage to the wall for a long time.

If the bathroom is well stored, it won't be messy.

The main problem of messy bathrooms is that the storage is not done well, and things are placed in the wrong place or things are not placed in the right place, which will lead to a lot of mess. Hooks need to be made into the walls to hang towels, and the sink should have a cabinet for toiletries.

1.In the early days, the washbasin was placed outside the bathroom for use in hotels, and now there are families who also put the washbasin outside the bathroom because of the limitations of the bathroom, because the bathroom is too small, so it is not suitable for us to place the washbasin next to the toilet, so try to keep a distance as much as possible, or there can be a partition between it and the toilet.

2.Many friends want to know that the shower room and toilet are in the bathroom, and if the washbasin is placed outside the bathroom or next to the door, is there a certain defect? In fact, this design is very good, because many toiletries will be placed on the sink, and the toilet will splash a lot of tiny bacteria when flushing, and if the toiletries are placed in the toilet, especially toothbrushes, etc., it will be very unhygienic to get these bacteria on them.

3.The advantages of placing the wash basin outside the bathroom: with traditional bathroom equipment, it is always full of moisture after bathing, and the humid air stays in the bathroom for a long time, causing air pollution.

Dividing the bathroom into two and separating dry and wet can keep the venue outside the bath dry and hygienic, and maintain the overall environment of the bathroom clean and beautiful.

4.The advantages of placing the wash basin outside the bathroom: because many toiletries will be placed on the sink, and the toilet will splash a lot of tiny bacteria when flushing, if the toiletries are placed in the toilet, especially toothbrushes, etc., it will be very unhygienic to get these bacteria stained.

If you look at the sewer pipe of the sink, you can see that it is an S-shaped pipe, which usually has a small amount of water in the pipe, and when there is water flowing downThe water level on one side of the S-shaped pipe is raised, and the water level on the other side should also be raised by the communicator principle, but due to the shape of the S-shaped pipe, it is still very good, and the idea of combining the sink and toilet into one is very sensible, because the sewage from the toilet can be used to flush the toilet.

Many people are doing this nowadays, and the most beautiful product is The Roca toilet sink combo, which has a sleek design that includes a small wastewater system that uses up to 25% less clean water than a standard dual-drain toilet, and an automatic cleaning system that prevents germs from entering the tank, thus reducing odors.

However, the toilet and shower combination is more clever and collects more wastewater than the sink. Observing the connecting pipe of the sink sewer, it can be found that it is an S-shaped pipe, usually with a small amount of water in the pipe, when there is water flowing down, the water level on one side of the S-shaped pipe rises, and the water level on the other side should also rise according to the principle of the communicator, but due to the limitation of the shape of the S-shaped pipe.

There is a gap between the water pressure on both sides, so that the water flows downWhen the water gradually flows out, the pressure on both sides gradually equalizes, and there is still a small amount of water in the S-shaped pipe by the principle of the communicator. The main thing is to choose the right size of the product according to the size of your own bathroom, and secondly, to understand the drainage method, the current sanitary ware is divided into wall drainage and ground drainage, you have to choose the corresponding sanitary ware according to your own drainage method.

This is true for both toilets and washbasins. When buying a toilet, you should also pay attention to measuring your own pit distance before buying. The pit spacing of the ground drainage method refers to the distance between the ground sewer hole point and the undecorated wall. The drainage method of the wall should be measured to the ground distance, which refers to the distance from the drainage hole to the ground.

If the pit spacing does not match, it will not be installed. If you look at the sewer pipe of the sink, you can see that the S-shaped pipe usually has a small amount of water in the pipe, and when there is water flowing down, the water level on one side of the S-shaped pipe rises. It's still a good idea, but the idea of combining a sink and a toilet is very sensible, because the toilet water can be used to flush the toilet.

Many people are doing this nowadays, and the most beautiful product is The Roca toilet sink combo, which has a sleek design that includes a small wastewater system that uses up to 25% less clean water than a standard dual-drain toilet, and an automatic cleaning system that prevents germs from entering the tank, thus reducing odors. However, the toilet and shower combination is more clever and collects more wastewater than the sink.

If the original ground is changed, the diameter of the drainage pipe will be reduced, and the sewage will be unsmooth and easy to block.

The location of the sink and toilet in the bathroom was originally not pretty, but it can be redesigned according to your personal preferences.

It can be redesigned, but it is a big project that requires a complete change.

Of course, you can, find a plumber to reinstall it according to the preferences and style of the raid.

Of course, you can change the location, you can find a professional plumber to operate at home.

Of course, you can, according to your personal preference, you can start by looking at the following renderings.

In fact, if you have enough money, you can do whatever you want.

The location of the washbasin and toilet in the bathroom turned out to be unsightly, so you can make do with it.

You can design anything you want from the new design, as long as you have a lot of money.