What is the acceptance criteria of automatic hot melt adhesive labeling machine?

This machine is an advanced equipment that can fill the domestic and foreign labeling market. There are two types of models: horizontal and vertical. It has the characteristics of reasonable structure, small land occupation, and a large number of stainless steel and non-metallic materials are selected on the surface.

It is widely used in aerosol cans, laser film labeling, OPP labeling. It is suitable for the labeling needs of food and beverage, mineral water, detergent, pesticide and chemical industry, health care, mosquito and fly insecticide, air freshener, and various cylindrical or square bottle types.

The machine adopts photoelectric detection, which has the advantages of accurate labeling and high accuracy, and has the functions of no bottle no labeling, labeling, automatic correction, deviation correction, automatic detection, etc., and can also cooperate with the inkjet printer to achieve continuous and accurate labeling characteristics.

This machine adopts Japanese Omron (OMRON (OMRON) industrial computer automatic electronic control system, RTM servo motor, and is equipped with touch screen operating system, which can adjust the speed according to the bottle quantity to adapt to the change of production volume, which can not only ensure the safe operation of the machine, but also ensure the accuracy of the standard. The operating system of this machine is concentrated on the operation box in front of the machine, and the layout of the components of the electrical control box refers to the electrical circuit diagram of the automatic control principle. The main circuit of this machine adopts 380 volt three-phase four-wire AC power supply, 24 volts for the control loop, volts for the signal circuit, and 127 volts and volts AC voltage are used to control the transformer supply.

In order to ensure the quality of labeling, the specifications and quality of trademark materials and bottles must meet the corresponding national standards to meet the requirements of labeling production. The company can also provide services according to the user's requirements for bottle size and label shape and material to meet the various needs of users.

2.The main composition of the machine.

The main components of this model are as follows: low platform device, bottle conveying device, label conveyor device and electrical control system.

3.Labelling principle.

The orderly bottles enter the machine through the conveyor belt, and the bottles next to each other are separated by a certain distance through the bottle distribution belt, and the bottles are regularly sent to the station turntable by the bottle feeding conveying device. Wherein the positioning function is completed by the special bottle feeding card wheel and the center guide plate, when the bottle enters the bottle card position, the bottle is stuck by the center guide plate, so that the bottle rotates in the march, the rotary table has 4 stations, through the mechanical transmission setting to ensure that the number of the bottle feeding conveyor wheel is matched, each station of the rotation is controlled by the system to form a revolution, and the rotation law is automatically run. According to the labeling requirements, the label is automatically imported, cut, glued, positioned, attached, pressed, and the upper and lower mouth of the label are tightened, and all the processes are automatically completed.

Applicable bottle type: mineral water labeling, cola labeling, PET bottle labeling, glass glue labeling, soy sauce labeling, disinfectant labeling, salad oil barrel labeling, aerosol can laser film labeling, OPP labeling machine, hot melt adhesive labeling, etc.

The main features of HG-830 series hot melt adhesive machine: 1. It has all the advantages of HG-820 series models, which is its improved and strengthened model; 2. Equipped with 2 AC inverter motors and 2 double-layer gear pumps, the glue output is stable, and the glue supply capacity is greatly enhanced; 3. The control system of rubber hose and spray gun can be equipped with up to 6 channels, and up to 13 full digital display temperature control tables can be preset, making it more practical, beautiful and generous; 4. Standard 30kg progressive large single (double) melting cylinder, faster melting speed, not easy to carbonize, increase the amount of glue, reduce the trouble of frequent glue; 5. This series of models are widely used in the production of non-woven fabrics, packaging, assembly, coating compounding, etc.

The main features of HG-880 series hot melt adhesive machine: 1. It has all the advantages of HG-830 series models, which is its improved and strengthened model; 2. Equipped with 1 or 2 AC inverter motors and 1 or 2 (single) double-layer gear pumps, the glue output is stable and the glue supply capacity is greatly enhanced; 3. The control system of rubber hose and spray gun can be equipped with up to 6 channels, and up to 13 full digital display temperature control tables can be preset, making it more practical, beautiful and generous; 4. Standard 80kg progressive large single (double) melting cylinder, double-layer heating, faster melting speed, not easy to carbonize, increase the amount of glue, reduce the trouble of frequent glue addition; 5. This series of models are widely used in the production of non-woven fabrics, packaging, assembly, coating compounding, etc.

A hot melt adhesive labeling machine is a labeling machine equipment that can be used to make full circumferential labeling. It is widely used in various fields.