How to buckle the logo of the car, how to cut off the logo of the car

The logo of the car is glued on, and it can be buckled off in the following way: apply it to a hot towel, or blow it with a hair dryer, and then pull it back and forth with a thin steel wire into the seam of the car mark.

After the car mark is buckled, there will generally be glue residue on the car, and the glue residue can be removed by the following methods:

1) If there are already black marks, you can use the white flower oil at home to apply some on it, then wipe it off with a rag, and wash it with water. If you don't have white flower oil at home, you can use something like wind oil essence or bone-setting oil to rub it repeatedly.

2) If the black mark is not large, you can wipe it with an eraser. If the area is large, you can use anhydrous alcohol, that is, industrial alcohol, apply it to the pasted area, and then wipe it with a cloth.

1. Hot melting method. Pour hot water or blow on the hair dryer to let the glue that sticks to the font slowly become soft and lose its viscosity, take off the font after loosening, and remove the residual offset print on the body with a wet towel.

2. Scratching and scraping method. Use a hard card such as a bank card, bus card or a fishing line to slowly scrape it off along the edge of the font and remove the glue with a damp towel.

3. Car marks refer to the signs of various automobile brands, mainly used for vehicle identification, and these signs often become the representatives of automobile companies. The logo of the automobile includes the trademark or factory mark of the car, the product label, the engine model and factory number, the vehicle model and factory number, and the vehicle identification number.

Extended information: 1. Since the car logo is adsorbed on the paint surface by the viscose, the high temperature can make the viscose lose its adsorption force, and the car logo is naturally easy to deduct, so it can also be used to pick the car logo by hot water heating method.

2. At present, there are relatively few cases where the car is not passed during the annual inspection due to the car mark. Of course, it is not excluded that some places will be stuck with this, so it is recommended to understand clearly in advance before starting.

1. One of the easiest ways is to pour hot water. Pour hot water on the sign, then take the word off, wipe it clean and you're done.

2. Drip the wind oil essence on the car logo, and after 1 minute, put on gloves and buckle the car mark with a fishing line.

3. Use a hot towel to compress it, or blow it with a hair dryer, and then use a thin steel wire to pull it back and forth into the seam of the car mark.

4. Go to the decoration store or 4S store, they will help you dispose of it, there are professional sols.

The first method is to use hot water, we prepare a pot of hot water to pour slowly on the car logo, the car logo is the hot water that is stained on the car body through the industrial glue will make the industrial glue lose its viscosity, so that the car logo will fall off.

The second method is to blow the car logo with a hot blower, after heating, the industrial glue will temporarily lose its stickiness, and we can easily remove the car mark.

The third method is to use wind oil essence, which has the effect of dissolving industrial glue, but this process requires slow infiltration of the mantle and slow mantle dissolution.

After the car logo is taken off, we can keep it properly, and if necessary, we can also paste it back, the method is very simple, after heating, it will be glued to the car body, and it will be glued firmly after waiting for it to cool.

A simple and brutal way to do this is to pour hot water directly into the logo, keep the water flowing slowly and heat the logo sufficiently, and then you can slowly get the logo off.

As for the residual adhesive cleaning after picking the car mark, you can use an adhesive remover.

If you want to buckle the car logo, it's very simple: find a screwdriver and hit the inside with a hammer to smash it down.

If you put the sign down on the car, you may be afraid of someone else's sneak attack, or you may be afraid of someone else's sneak attack.

There are screws in the back of high-end cars, and the low-end points that need to be turned over the trunk to remove the clips and then use a screwdriver to remove the screws are glued, but it is difficult to take them off.

Basically, there will be a mark when you take it off, and I have done it in the car factory.

In general, the logo on the front cover of the water is glued, and the trunk is glued.

Hard buckle, that thing was originally glued on.

The easiest way to do this is to pour hot water, pour hot water on the sign, then take the word down, and finally wipe it clean. You can also use a hot towel to compress it, or blow it with a hair dryer, and then use a thin steel wire to pull back and forth in the seam of the car logo, and you must master the strength when pulling.

Other methods:

1. Wind oil essence drips onto the car logo, and after 1 minute, put on gloves and buckle the car mark with a fishing line.

2. Go to the decoration store or 4S store, they will help you dispose of it, there are professional sols.

Car marks refer to the logos of various car brands, which often become representatives of automobile enterprises. The logo of the automobile includes the trademark or factory mark of the car, the product label, the engine model and factory number, the vehicle model and factory number, and the vehicle identification number.

The car should have its own mark to indicate the manufacturer, model, engine power, bearing weight, engine and vehicle factory number, etc. Their function is to facilitate the identification of vehicles by sellers, users, maintenance personnel, and traffic management departments"Identity"。According to China's national regulations, these signs must be checked during the registration and annual inspection of new cars.

The existence of the car logo, whether from the perspective of people, or from the perspective of those car manufacturers, is a very much needed thing, he can directly let us feel more from the car manufacturers of the commitment of things, the existence of these car marks can also better remind these car manufacturers to make every car will become their brand trademark, if the quality of the vehicle is manufactured, the damage will be their reputation, each car on the car on a representative of the quality of the trademark, is also a means of decoration of the vehicle that is inevitable.

Photo by Gu Fan) @2019