The bathroom is always leaking and moldy, how to ensure that there is no trouble to stay in the wate

Many people buy a house and renovate it, but they find that the bathroom always leaksAnd this is not the most serious, after the water leakage also leads to mold everywhere, so many friends have a question, that is, how to achieve the waterproof protection of the bathroom? This way we were able to ensure that we didn't have so much trouble after our stay. Today, I will give you a good explanation.

To do a good job in the waterproofing of the bathroom, I think the wall waterproofing material must be selectedIt's a small thing, but it's not to be underestimated. Because the area of our bathroom is relatively small, there are many pipes that will pass through the floor, so the choice of materials is generally paint waterproofing, and membrane waterproofing is rarely used. Because the waterproof effect of the coating is much better than that of the membrane waterproofing, many customers are very satisfied, and find that the leakage is very rare.

To do a good job of waterproofing the bathroom, I think you must adjust the waterproof height of the wall. The national standard rice, so when the house was built, it was already made in accordance with the national standard. Therefore, our waterproofing layer must extend from the ground to the wall, about three meters above the ground.

After a series of waterproofing projects, we have to do a water storage experiment every day to see if it leaks.

If the waterproofing of the bathroom is done well, we should also prevent the tiles from emptying and falling off. Because some people brush the waterproof coating too thickly, it leads to the result of tile falling off and empty package, so when brushing the waterproof coating, it should be done a good job of brushing, so as to avoid the above phenomena and fully achieve the waterproof effect.

You can put some dehumidifier and activated charcoal in the bathroom, and then you need to find a professional repair team to repair it. You can sprinkle some salt in the water when mopping the floor, and reducing moisture can reduce mold.

The first is the waterproof material, the selection of the best, and then the installation to do a good job of testing, the problem is solved, and then the peace of mind to move in, not perfunctory.

Waterproofing must choose excellent quality materials, and must ensure quality and quantity during construction, not cut corners, it is best to be able to supervise the completion of the decoration process.

Like doing a project, there is an acceptance function after it is done, the bathroom is leaking and moldy, first check whether your own waterproofing is not done well or the problem upstairs, and find the problem to better solve the problem.

It's very simple, after the decoration is completed, test it first, spread the bathroom with a layer of water, and see if there are any adverse consequences.

In the process of decoration, we must find professionals to carry out construction, they have more rich experience in decoration, especially the waterproof problem of the bathroom must be done well, otherwise there will be endless troubles.

It is necessary to find the source of the water leak and solve the problem at the root once and for all. Find a professional renovation company and let it find out where the problem lies and give a solution.

Test whether there is such a problem, if there is a timely discussion with the decoration company, and then move in after the modification.

In home decoration, water seepage on the house wall can be said to be a relatively common phenomenon, but you must know that if the water seepage on the wall is too dry, it will not only affect yourself, but also may affect your neighbors, and it is easy to cause discord. Below I have introduced how to do water seepage in the wall and the solution to the water seepage and mold in the wall.

What to do if the walls are leaking.

In general, leakage of house walls is more common, mainly in the following three points.

First, the problem of water pipes: it is also easy to make the water pipes aging and rusting all year round, the other may be that the installation is not in place, the fastening is not tight, or it may be that the quality of the water pipes is too poor, which may affect the wall. If this happens, you can fix it anywhere, and of course, if the conditions allow, it's best to change the pipes.

2. The waterproofness of the shower room is not up to standard: the wall will be damp and mildew for a long time in a humid environment, and the wall should be re-waterproof at this time to avoid inconvenience caused by inconvenience. Use it later.

3。Holes left when building a house: When it rains, the interior walls will recede.

This situation is not recommended for you to do it yourself. It is better to go to the real estate company to solve this problem, which is also asking for trouble. Real estate companies must first determine if the leak belongs to a public place so they know if internal and external renovations are needed.

And remind you that the home warranty period is usually 2 years (plumbing warranty) and 5 years (waterproof warranty). If it is a leak in the exterior wall, you can ask the developer to help repair it during the quality assurance period of the house, and these costs will be borne by the developer.

Suggested solutions for leakage and mildew of the wall.

1. The smaller the range, the better the waterproof putty on this layer; If the range is larger, it is recommended to re-polish the scraping putty on this side of the wall. In general, it is advisable to apply another layer of interior wall paint, as interior wall paint is oil-based to prevent mold from reoccurring.

2. You can first coat the wall with impermeable liquid, which is to make the wall form a colorless and transparent waterproof film, which is also to prevent external moisture from soaking, keep the wall dry, and then decorate the wall. If the walls are already wet, then you can opt for interior wall painting in more waterproof colors.

3.If the walls are made of wallpaper, then you should be more careful, because the wallpaper is prone to mold. If you find black spots on the wallpaper, do not wipe the water at this time, which will make the wallpaper more damp and more prone to mildew.

The correct method of mold removal, then you should wipe it with a cloth dipped in alcohol.

The above is how to do if the bathroom wall seeps water and mold, if you have similar problems, then consult the Xiuyi Repair Bathroom Plugging Center, consultation**: 400-639-0005.

The slope of the maintenance layer mortar and the slope to the indoor floor drain can lead the water infiltrated into the adhesive layer mortar to the floor drain and reduce the risk of water leakage. Laying a silicon mesh and paving the bean stone mortar retention layer (with an average thickness of about 25px higher than the coil) reduces the risk of cracking of the upper waterproofing layer. Brush the ground waterproof, uniform brush flexible type waterproof.

Brush it two or three times. Note that the nozzle. In the corner of the wall, the surrounding area of the sewage pipe must be brushed in place.

Then flip up from the ground 300 brushes to waterproof. This ensures that the water does not run for 4 weeks.

Bathroom water seepage is waterproof directly leads to very little, because the waterproof must be passed after the closed water test will be paved with tiles, as long as there is no loss of waterproof layer when the tile is paved, it is difficult to have water seepage problems in the later stage, before the water test, all the drains in the bathroom are sealed, the amount of water can not exceed the door stone, and then the water can be released, the water has not dropped significantly within 24 hours, and there is no leakage on the indoor roof downstairs, indicating that the waterproof is ideally qualified, and the tiles can be paved next.

If you are still worried that there will be something missing after caulking, you can brush a layer of penetrating waterproof penetrant on it, or buy a small bucket and pour it directly on the ground to let it penetrate freely, so as to effectively prevent water seepage in the brick joint. Gel waterproof adhesive: It can be poured directly on the bathroom floor, which will automatically plug the gaps of the bathroom floor tiles, and has a waterproof effect, which is generally used for the ground has leaked.

Generally, it is packaged in barrels, and the two-component products in the barrels can be stirred according to the instructions.

When we lay the floor tiles in the bathroom, we must remember to plan the slope in advance and slope all the floor tiles to the floor drain in the bathroom. The slope should be relatively larger, and I personally recommend that you can do a slope of 5, which can ensure that the water flows away quickly, and the waterproof ability of the beauty joint is equivalent to that of glazed tiles, and it is precisely used to plug the gaps in the tiles. Therefore, glazed tiles with beauty sewing agent can be regarded as a strong combination.

If the bathroom is constantly leaking, the walls will be damp and the skin will fall off frequently. First of all, if we want to prevent water seepage in this bathroom, then we must choose good materials for decoration.

I think that if the water seeps for too long, causing the wall to become damp and mildew, etc., and we want to better prevent water seepage in the bathroom, we can put some devices on the wall of the bathroom to prevent water seepage, and do a good job of cleaning the bathroom.

Cause of water leakage:

The waterproof layer is divided into a horizontal waterproof layer and a vertical waterproof layer on the side, the horizontal waterproof layer leaks to the downstairs if there is a problem, and the vertical waterproof layer on the side leaks to your own home if there is a problem. Water leaking into the corner of the outside of your bathroom or the door of the bathroom is first sure that the vertical waterproof layer on the side is broken somewhere, otherwise no matter how much water can only come up from the tile surface. In fact, the damp marks we see in the corner of the bathroom or the door of the bathroom are not vertically leaked in the past, theoretically speaking, as long as the waterproof layer is damaged somewhere, the open water in the bathroom penetrates below the tile surface from the corner, tile surface and joints or any other possible place, and is concentrated in the mortar layer, then the mortar layer is equivalent to becoming a water layer, and then concentrated in the waterproof layer where the damage leaks downstairs.

Note: The damp and mildew of about 50 cm from the ground to the outside wall of the bathroom is caused by water seepage on the bathroom floor, not the wall water seepage. Many unprofessional people will definitely not be able to solve the problem by simply repairing the wall.

Conclusion: The vast majority of the bathroom leaks to their own home, it is useless to treat the whole surface, only *** the whole ground is completely free of water can penetrate into the mortar layer below the surface of the tile, there will be no water seepage to the damage of the waterproof layer, so that the problem of water leakage is solved.

What floor do you live on, if there are residents upstairs, look at the location of the leaky wall in the bathroom, and check if the water pipe in your house is broken, if not. That is, the upstairs resident toilet leakage seeps down and causes the wall of your house to leak, if it is not your own problem, go to the upstairs, remember, no matter whether the landlord is a man or a woman, you must ask someone to accompany you,

Knock open the tiles near the bathroom pipeline, find the pipe, find out the cause of the leakage, re-drain the pipe, or repair the leak (usually in the joint or corner, you can replace the elbow, etc.). Then re-til. The water in the bedroom will disappear slowly, and if the mold is serious, you can repaint it after it is completely dry.

You probably don't have much experience....Find someone who specializes in fixing leaks in your house....I often see it on the street...This kind of people.

Calculate the amount of work according to the area, calculate the wall part of the decoration quota, or agree on the price per square meter to help you.

Find the leak and repair it thoroughly.