How to arrange the warehouse management items is more reasonable

Consider the separation of what can be eaten and what cannot be eaten

There is also the separation of dry and wet that can be eaten

Separate storage of cleaning items

The items in the comparison should not be placed in a high place, but should be placed at waist level in case the handling is not strained

Warehouse management items. There are five points that should be noted.

1 Safety of Items. That is, some of the most effective prevention and rescue such as fire.

2 Access to Items. There is a way, the heavy is near and the light is far. If it is heavier and inconvenient to access, it should be placed closer to the exit, and on the contrary, it should be considered relatively far away.

3 Ratio of items. How much. with the usual light. More and less, often used and less used.

4 The nature of the objects in relation to each other. Some items can not be stored in close proximity, to consider the distance between the placement of 5 items when placed, it is conducive to inspection and transfer.

The standard of warehouse item placement is usually determined according to the nature of the item and the frequency of use. First of all, you need to put items of the same kind together to make it easier to manage and find. Second, important or frequently used items should be placed in an easily accessible location for quick access.

For long-term storage items, factors such as weight, fragility and size should be considered, and proper storage methods and a safe environment should be employed. These measures help to increase the productivity and efficiency of the warehouse and reduce the risk of loss and waste.

In order to manage goods more efficiently, appropriate marking and marking schemes should be developed to quickly find and distinguish between different kinds of items. This can be achieved through technologies such as electronic management systems, barcodes or RFID, and with reasonable warehouse layout and information management systems to improve management effectiveness. In addition, regular cleaning and maintenance should be carried out to prevent accumulation and contamination of items.

In addition to the above basic measures, warehouse item placement standards also need to take into account industry standards and regulations. Many industries have their own special needs and requirements, such as dangerous goods, fresh food, and medical supplies, which require special storage and handling methods. In these cases, inventory items should be placed and managed in accordance with relevant regulations and standards, and professionals should be employed to ensure safety and reliability.

In short, the standard of warehouse item placement needs to combine the characteristics and use needs of the goods, and adopt reasonable and ineffective management methods to meet the production and operation needs of the warehouse. By innovating and optimizing management measures, the efficiency and quality of the warehouse can be improved, and more value and business opportunities can be created for the enterprise. <>

If the dosage is used more times, place it in the place where it is easiest to put and take it. In addition, it is more practical to stack in blocks and compartments. It must be clearly marked.

It is best to place it on the assembly line production line, which can improve production efficiency.

Placed in the form of a frame, do a good job of material labeling, easy to find, easy to take

It is best to put it in the order of operation, easy to find, easy to take, and convenient!

There is no way to write a proposal for you, it is different for each company, but it can give you a few suggestions.

You first transfer out the annual flow in and out of the company's warehouse, and then classify it first, such as labor insurance, spare parts, raw materials, office supplies, etc.

After dividing the categories, the accounts are also classified according to the category, and then each account is counted according to the following aspects, the number of flows, the frequency of use, etc., and then the warehouse is divided according to the large category, in principle, the life and office supplies are on the outside, and then the raw materials, spare parts, etc., each classification is placed from the middle to the top according to the frequency of use, and the bottom is commonly used but not the main one. It should be noted that the office supplies should be placed in the front of the center as much as possible, that is, only the warehouse personnel can get it as much as possible, because raw materials and equipment parts are also commonly used, but many times the warehouse personnel have to take it with other people, and they are often taken away by the way. . .

When partitioning, you should pay attention to the fact that all kinds of supplies should have a certain amount of spare according to the delivery cycle, which should be taken into account in the occupied area.

Considering the frequency of unloading and pick-up, commonly used materials are placed in the warehouse access doors.

You can email me your company information, and you can try to draw a picture for you.

In order to improve the management level of the workshop warehouse and standardize the placement of warehouse items, the following standards are formulated:

1. The steel should be stacked according to the type and specification, and placed on the shelves in the fence, and the thin plates and other steel that cannot be placed on the shelves should be placed on the ground, but they should not affect the walking of people and the entry and exit of goods.

2. The mechanical oil is uniformly placed in the warehouse in the oil depot, and is uniformly placed according to the oil, and the qualified and unqualified mechanical oil must be distinguished.

3. All desulfurization parts are placed in the parts warehouse in the oil depot, which are distinguished according to the application of different equipment, and the general spare parts are placed in partitions according to the types and specifications.

4. Less used reducers, woven bags, chain buckets, chain plates, large valves, waste accessories and other items are uniformly placed at the bottom of the shelves in the fence, and are placed differently according to different types.

5. The accessories warehouse in the maintenance workshop mainly places bearings, skeleton oil seals, O-rings, pipe fittings, processed parts, smaller equipment accessories, fillers, packing and materials with small volume. The principle of placing these items is to divide them according to the type, and then place them differently according to the specifications and models, requiring clear types, consistent specifications, neat placement, easy to find, and the correspondence between the label and the article.

Do a good job in the planning and placement of warehouse goods, can ensure the safety of warehousing, at the same time facilitate the receipt and dispatch of goods, improve the operational efficiency of warehouse personnel, the following summary of warehouse goods stacking "five distance" standards and schematic diagrams.

Warehouse "five distance" requirements:

1. Top distance: refers to the distance between the top surface of the stacked goods and the roof surface of the warehouse. General flat-roofed buildings with a roof distance of more than 50 cm; For herringbone roofs, the top surface of the stacking is subject to no more than the beams.

2. Lamp distance: refers to the distance between the fixed lighting in the warehouse and the commodity. The distance between the lights should not be less than 50 cm to prevent the lights from getting too close to the goods, and the heat generated by the lights can cause fires.

3. Wall distance: refers to the distance between the wall and the stacked goods. The wall spacing is divided into the outer wall spacing and the inner wall spacing. Generally, the distance between the outer walls is more than 50 cm, and the distance between the inner walls is more than 30 cm. In order to ventilate and disperse moisture and prevent fire, in the event of a fire, it can be used by firefighters to enter and exit.

4. Column spacing: refers to the distance between the pile and the roof column is generally 30 50 cm. The function of the column spacing is to prevent the moisture emitted by the column from damaging the goods and to protect the column base from damaging the building.

5. Stacking distance: refers to the distance between the stack and the stack, usually 100 cm, the role of the stacking distance is to make the interval between the stack and the stack clear, to prevent confusion, but also to facilitate ventilation inspection, once a fire occurs, it is also convenient for rescue and evacuation of materials.

First, the location of the goods should follow several principles:

1. Large sales volume or ** goods should be placed on the shelves near the exit or import of the warehouse;

2. The sales volume is large or the goods should be placed in the middle of the shelf. The reason why the shelves near the exit of the warehouse are not placed with high-sales goods is because the goods in the middle of the shelves do not need the picker to bend over and step up, which is conducive to rapid picking and rapid shipment. Products with small sales are placed at the bottom or top of the shelf.

3. However, in the specific implementation process, it needs to be handled according to the specific situation of the shelf, for example, the position of the **shelf** has been occupied by other products, so it is necessary to put the **product on the second** shelf. In addition, who occupies the ** position of ** goods and long-selling goods also needs to be decided by the seller according to their own situation. But the general guidelines are the same:

Place large-volume, bulky products close to the exit.

4. There is no optimal option for picking route and picking method, only the most suitable option. The design of picking routes and picking methods relies on the placement and identification of shelves and goods.

5. The storage of goods in the small warehouse is limited, and the shipment volume is also limited, so there is no need for too complicated picking routes and picking methods. The larger warehouse stores more goods, the shipment volume is also larger, the labor volume of the picker will be larger, and the reasonable and scientific picking route and picking method can greatly provide picking efficiency and reduce the workload of the picker.

2. Examples: 2. The S-shaped route is the most efficient route for the picker. In this warehouse, the entrance and exit are on one side, and the picker will not take the same route as the end point of each operation, and each operation will not take the same route, which belongs to the most labor-saving route in this warehouse.

3. The position of the shelves is based on the brand number left and right, so as to ensure that the route taken by the picker is also S-shaped. Each shelf is a multi-layer structure, and the cargo number is also arranged in an S shape from top to bottom. The design of the 4 S-shapes not only ensures that the route taken by the picker is the most economical, but also ensures that the route searched by the picker's line of sight is also the most economical.

3. Picking. Picking method: shelves, locations, and routes have been planned, how to pick? There are two more options here, one is to pick by order and the other is to pick in aggregate. The so-called picking by order means that the goods are placed in different baskets according to the order when picking, and then sent to the packing place; Summary picking means that the items are not divided into baskets during the picking process, and are directly sent to the packing place and then packed by the packer according to the order.

Design shelves according to the characteristics of the warehouse and goods, select the appropriate amount of shelves according to the variety of goods, and try to make five items on the shelves.

Five, ten yards, other items should also be kept straight.

Follow the principle of heavy not light, big not small.

You can start by making a list of goods, or by the type of goods, or by the name of the goods. It will also be easy to find this way.

1. The materials are divided into categories, shelves, and layered "five five" neatly placed and hung with material cards, and the warehouse is divided into A, B, C, D and other areas, and the materials are placed in different areas according to the category, and a number of shelves are placed in each area, and each shelf has a number of layers. In this way, no matter if there are thousands of materials, they can find it very quickly. Just like they all have their own house numbers, in the upper right corner of the material account page, write "a certain area, a certain shelf, a certain floor", which is very easy to find.

2. According to the requirements of the 5S activity, the materials are sorted out and rectified, and the useless materials (generally not used for more than two years) are disposed of, and the useful materials are re-arranged according to the above requirements, and those that can be put on the shelves are uniformly put on the shelves. All materials should be hung with a material card, indicating the material name, specification and model, warehousing time, **merchant, quantity, etc. 3. Set up the waiting area, and temporarily put the materials sent to the waiting area for inspection to avoid confusion with the stored materials.

4. Set up the batching area, according to the order number and quantity of the production plan, pre-match in the batching area, and mark the single number. It can speed up the delivery speed and avoid wrong delivery and confusion. 5. The above requirements are implemented as a system, and each warehouse keeper must comply with them.

For the management of the messy warehouse, put forward the above 5 suggestions, and other management of the warehouse should also buy some books to study, I believe you will improve quickly. If there is a large carton, it cannot be placed on the shelf, but should be placed on a moisture-proof wooden board mat (more than 10 cm high), and the carton should be stacked as high as possible according to the degree of bearing. If the warehouse is large enough and the goods are large enough for large warehouses, battery forklifts and movable shelves (detachable) can be configured to handle or stack (can be stacked to meters high), which can effectively use the warehouse and improve the efficiency of warehousing.

The first consideration is the warehouse building structure. The first thing we consider when making shelf design is the factory warehouse structure.

The main considerations here are:1The height of the warehouse, the height of the warehouse determines the height of our shelves.

2.The position of the columns and beams, which affects the overall placement of the shelves. 3.

The bearing capacity of the floor, which affects the installation of the shelves and the load-bearing of the shelves in the future. 4.Lighting systems and fire protection systems must be considered.

The second consideration is: the characteristics of the items stored on the shelves. The shelf is for the goods, and the size of the goods determines the size of the shelf.

The second thing we need to consider is the weight of the goods, which determines the materials and load-bearing materials used in the shelves. The third point is to choose different shelf types according to different storage units. For example, if the unit uses a pallet, a storage cage, and a box, the type of shelf selected must be different.

The third consideration is shelf accessibility. The relationship between the storage capacity of the shelf and the storage density is equivalent to the relationship between the fish and the bear's paw, which is not both, and is usually reduced in order to provide the density of the storage before the storage and reduce the accessibility of the goods.

The general solution is really just a compromise between various factors. The fourth point is the equipment for handling goods.

Handling equipment provides an important factor in warehouse efficiency, and usually warehouses are equipped with stacking bridge grips. This requires us to fully consider the specifications and models of stackers when designing the width of the shelves.

The last point is: the amount of inbound and outbound storage. Inbound and outbound volumes are a measure of whether the type of shelf we have selected is wasteful. For example, some shelves have a good storage density, but the inbound and outbound volumes are very low, which is a bit unsuitable.