What method can be used to shovel the wall skin for the second decoration?

<> shoveling the wall skin of the new house is also a very important step, which directly affects the quality of the later project, thenShovel wall skin method for new housesWhat is it? Let's take a look at it with the master of Shanghai Decoration Network.

Shovel wall skin method for new houses

1. The most convenient and effective way to shovel the wall skin is to pour the wall skin with salt water first, because the salt water can effectively reduce the hardness of the wall skin, and then use the shovel to do the shoveling treatment against the direction of the wall skin, and finally use the iron brush dipped in a little dish soap to brush off the remaining surface wall skin.

2. After soaking the wall with water, use a special shovel to shovel off the wall, this method may not be as effective as the previous one, but it is a very good treatment for non-water-resistant putty.

3. The last one is to remove the wall skin with the help of chemical agents, but although this method is simple and direct, because it is very corrosive, it is easy to damage the wall, so it is not safe and environmentally friendly, and it should be carefully selected in the process of operation.

What should I do if the shovel does not move

1. If it is a rough house, the wall is only made of cement mortar plastering layer, no putty or gypsum plastering layer, at this time, the decoration does not need to remove the original cement mortar plastering layer, just scrape the plaster leveling on the existing basis, and then scrape the putty 2-3 times, and finally do the paint layer.

2. If the wall putty has been painted after the house is obtained, then see whether the putty used by the developer is water-resistant putty, and if so, see whether its quality needs to be eradicated; If it is not a non-water-resistant putty, you can soak the wall with water and then shovel the wall skin, which will be relatively simple and labor-saving. Generally, developers will not use too good putty, so it is best to do shovel wall skin treatment for heavy construction in the future, so as to ensure the service life in the future.

Decoration shovel wall skin shovel several layers

1. If the new house is renovated now, if the developer has already painted the wall, then what the owner needs to do is to find a professional to check and see if the wall skin needs to be removed. A relatively simple inspection method is to use a wet rag to wipe the wall to see if there is a phenomenon of powder on the wall, if it is a painted wall, first scrape off a small part of the paint and then use water for testing.

2. If the wall is decorated twice, you need to look at the age of the wall decoration, if it is a house before the 90s of the last century, it is best to do eradication; If you only decorate for one or two years, you can see if the wall has hollowing, cracking, and falling off, if not, you can directly use steel brushes and sandpaper to polish the wall and repaint the latex paint, without shoveling the wall skin.

3. It is also a problem to decorate the shovel and shovel several layers of the wall skin, because the treatment layer on the surface of the general wall mainly includes the three layers of base cement mortar plastering layer, gypsum plastering layer and putty. How many layers need to be shoveled is mainly decided according to whether the treatment at each level meets the subsequent construction requirements and whether there will be problems in the follow-up. First of all, if the wall has problems such as hollowing, cracking, and falling off, it must be eradicated, because there is a high possibility of problems in the future.

First of all, you can use vertical knocking in all directions, knock some wall skin that is easy to fall off first, and then sprinkle the whole wall with enough water to soak the wall skin, and then scrape it with a shovel to prevent dust from splashing, and secondly, it can be easier to scrape off the wall skin.

First, you can tap vertically from all directions, first knock to make some of the walls that are easy to fall fall off, then sprinkle enough water on the entire wall to soak the walls, and then scrape it clean with a shovel to prevent dust from splashing. Secondly, you can scrape the walls more easily.

Use a watering can to wet the putty that needs to be removed with water, use a spatula to remove the putty that has been separated from the wall from one part of the wall, and remove some local residual putty after shoveling off the wall. In this way, the entire wall putty is cleaned.

After buying a house, some people want to redecorate the house, at this time, they will remove the walls of the house, reinstall the wallpaper, or paint with latex paint.

Wait, the work of shoveling the wall skin is laborious, so how to shovel the wall skin quickly, cleanly, there are still some tricks in this. For example, professional tools for shoveling wall skin must be purchased in advance, and some tips for shoveling wall skin are best consulted in advance, because shoveling wall skin is different from moving bricks, and it is not just brute force that can do this thing. <>

1. Although shoveling wall skin requires skills, it is also a physical job, so try to find someone with better health to help you do it. If you just go to shovel the wall skin by yourself, maybe this workload is a bit large, so try to find a more time before going again, find your friends to do it with yourself on the weekend, prepare clothes, shoes, hats and clothes, let yourself be covered in white ash, buy a special shovel for shoveling the wall skin, so that you have the right tools, and you will not be tired when you work. <>

Second, before shoveling the wall skin, be sure to prepare the watering can and moisten the wall skin with the water in the watering can. After the wall skin is fully moistened, it is not so hard when it is cleaned, and it will save a lot of effort when shoveling it up again, and it is fast and clean when shoveling the wall skin, which is also a little trick to shovel the wall skin! <>

3. In fact, it is recommended that you do professional things and leave them to professional people. There are dedicated renovation construction personnel, they are faster and more professional, and if you do it yourself, you may save some wages.

But it takes time and effort, and you will get dirty, so try to spend some money to hire professional people to do what you can make time to do other things, there is no need, do everything yourself, after all, you are not good at it, it takes a lot of time, and in the end it may not be satisfactory, and you have to need professional people to do it again.

First of all, you have to have the tools to shovel the wall skin, and secondly, it will be good to shovel the wall with water, which is generally very difficult to shovel at home, and the effect is relatively poor, you can hire a professional decoration team and let them operate.

The first point is the best way to wipe it with that kind of clean rag, which is very good, the second point is to clean it with a professional detergent, the effect is also very good, and the third point can be smeared with some relative paint, which is also very fast and clean.

You can spray water on the wall skin first, then wait for a while before shoveling the wall skin with a flat shovel.

First of all, we should sprinkle some water on the wall skin, and then use a special wall scraper tool to scrape it off, so that it will be very good.

The skin should be produced by a machine, which can quickly remove the wall skin.

First spray a little water on the wall to let it moisten it, and then use a scraper to scrape off all the skin on it, and it is clean and does not produce flying dust.

"Shoveling wall skin" refers to the removal of the original decorative layer of the wall to lay the foundation for the current wall decoration project. Including wall painting, wall bricking and other foundation treatment, belongs to one of the categories of concealed engineering, eradication has the following reasons:

1) The putty powder used in the early stage of the house is not good, the gelatinity is low, and the glue in the putty will fall off after expiration.

2) Before the developer scrapes the putty, the grassroots treatment is not in place, basically it can be said that it is not treated, and it takes a long time to get rid of the cement flour, that is, the putty falls off and bulges like the previous one.

3) The early base treatment can not be in the previous position, when the house traces of the foundation house after a heating season or full of people, the building has subsidence, so that the house cracks.

90% of the decoration of new houses need to remove the original wall skin, because most of the putty powder of new houses is not used for living, but is convenient for the homeowner to accept the house, so this is why the wall skin should be removed before the decoration of the new house. It is not only for the sake of beauty, but more importantly, for the assurance of the quality of the later decoration.

<>1) Shovel the wall skin to see the quality of the house itself, the developer in order to save money the original wall does not stick the mesh cloth, the cement mortar ratio is very poor, after shoveling the wall skin, touch the sand particles on the wall with your hands are falling. Now the house floor slabs are poured, there are many construction parties in the construction, missing a lot of steel bars or wire heads at the top, and so on after scraping putty, contact with moisture will rust, these problems must be found in time when shoveling the wall skin, to avoid the second rework. (2) The putty scraped by the developer for the house is usually the cheapest on the market, and it cannot meet the environmental protection standards for home use.

The developer must shovel off this layer of putty and re-scrape it with more environmentally friendly putty powder.

1. The purpose of shoveling wall skins

Shoveling wall skin refers to the removal of the original decorative layer of the wall to lay the foundation for the upcoming wall decoration project, in order to improve the quality of the wall.

Shoveling wall skin is a kind of concealed project, including wall painting, wall bricking and other basic treatments.

Due to the poor quality of the original wall skin, if the ruler is directly on the top for further decoration processing, it is likely to cause damage and cracking of the wall in the later stage, so the eradication of the poor quality of the wall skin can improve the use of the wall life and decorative effect.

2. The degree to which the wall skin needs to be shoveled:

It is necessary to observe whether the bottom layer of the wall meets the standard requirements of the subsequent decoration or painting project after shoveling the wall skin, such as whether the gypsum layer on the wall skin has good curing strength, and whether the putty layer is resistant to Hutan water.

The specific requirements are:

1. No bulges.

2. No residual plain ash.

3. Clean and flat.

When our wall skin is up due to dampness, we need to shovel off the surface of the wall skin, and then scrape it again, so as to ensure that the back wall skin will not fall off to the greatest extent. Of course, in addition to this, it is necessary to do a good job of waterproofing. Otherwise, there will still be mold and wall skin in the later stage.

Many people always feel that it is very troublesome when shoveling wall skins. Sometimes you can't shovel it off. In fact, there is also a skill in shoveling wall skin.

First of all, we need to buy a handy tool. Then empty the home, if there are more things in the house that are difficult to empty, then take a small watering can, fill the watering can with water, spray the water on the wall, and ensure that the wall is all wet.

If the house is emptied and can be watered on the ground, then we can just take a basin, fill it with water and pour it on the wall. Only after the wall is soaked, then the wall skin is easier to be shoveled down.

When the wall was soaked, we picked up a shovel and shoveled the skin off the wall. If you can't shovel, then pour a little more water and shovel. If the place above is higher, then you can tie the shovel to the stick and make the skin.

After shoveling the wall skin, we need to do another thing, paint our wall with a layer of wall solidification. The reason why we need to brush the wall is because after we shovel off the original wall skin, the wall is not easy to adhere to the putty powder. Therefore, it is necessary to use the wall solid to achieve the effect of glue, and firmly grasp the putty powder brushed on the wall.

After painting the walls, we can prepare for the follow-up work. Of course, if you don't know much about how to shovel the wall skin, I personally recommend leaving it to a decoration company or a professional to deal with. Because if we deal with it ourselves, it is very likely that we will make potholes in front because of the force.

Then it will be more laborious to scrape it in the future. If the wall skin of your home itself is arched and falling off in large patches, then you can try to deal with it yourself. But if it's more difficult to deal with, then it's best to bring in a professional.

When you want to shovel the wall skin, it is fast and clean, 1, ordinary putty, 2, water-resistant putty, 3, sand and gray wall, 4, internal insulation wall.

When shoveling the wall skin, you can use a shovel to shovel directly from the bottom, so that it will be fast and clean, and the wall surface is particularly neat.

In life, if you want to shovel the wall skin quickly and cleanly, maybe you need to have a very practical tool. You can scrape off the wall skin very quickly when you use the Quick Scraper tool, and you can use a very useful tool to make your wall skin scraped off quickly and cleanly.