Should you shovel the wall skin for the decoration of the new house? What is the method of shoveling

Nowadays, when decorating a home, many decoration masters who are carrying out construction will suggest that the wall skin be shoveled, if the wall skin is not shoveled, then the latex paint is easy to cause cracking. However, many owners will also have some complaints that since they want to be removed, why should the developer give a white approval, and whether the white wall skin should be removed. So let's take a look at whether to shovel the wall skin for the decoration of the new house, and the method of shoveling the wall skin of the new house!

Do I need to shovel the wall before the renovation of the new house?

1. The key to shoveling the wall skin is also to look at the quality of the wall itself, if the quality of the wall itself is very good, then it is okay not to shovel; If the quality of the wall itself is not very good, it is proposed to shovel the wall to lay the foundation for the interior decoration at the back.

2. See if the wall is water-resistant putty powder, if it is water-resistant putty, you don't need to remove the original wall putty powder, if it is non-water-resistant putty powder, you need to remove it. For how to judge whether it is water-resistant putty powder, you can use the broom to sweep the wall, and the significant powder loss is whether it is non-water-resistant putty powder, or pour it on the wall immediately with pure water, and the water does not drip down quickly into the putty powder, which is also non-water-resistant putty powder, and it is also like the wall after sprinkling water, rubbing the wall with your hands is significantly loose and needs to be removed.

3. If the wall putty powder falls down, the wall is hollow and other problems, it indicates that there is something wrong with the construction of the project, and the wall should be shoveled off and revised. If there is a crack in the wall, it is likely that the wall structure is a problem, and the wall must be shoveled out to find out the cause and complete the repair.

What is the way to shovel the wall in a new house?

1. First of all, you should prepare tools, paint roller bearings, iron buckets, etc., and then distinguish whether the putty powder is water-resistant putty powder, you can simply splash a little water on the wall, wait for 2 minutes and then scrape it with special tools such as scrapers, if the wall layer by layer is very easy to peel off, it is not water-resistant putty powder, and the wall needs to be shoveled.

2. The following is the application of the interior decoration special type of wall-coated roller bearing, soak it in water for a short time, remove the small total area area that must be shoveled to soak the wall, and then quickly use a tool to shovel off the soaked wall, pay attention to a piece of continuous knife, roof and high-altitude wall with a herringbone ladder and extend the shovel collet, and so on all shovels, first brush a layer of wall solid, and then batch putty again.

Whether to shovel the wall skin for the decoration of the new house mainly depends on whether the original wall is water-resistant putty. If the international environmental standards have been met, there is no need to remove the wall skin, and if it is not in accordance with the regulations, then it must be removed. Attention needs to be paid to the material in this area.

I think it is necessary to remove the wall skin, so that it will be more convenient to decorate in the later stage, and it will not cause more losses; When shoveling the wall skin, you can choose the electric wall shovel machine, his quality is very high, and the use performance is very good, very convenient, the public use is also carefully processed, can be very good to shovel off the wall skin.

The decoration of a new house requires shoveling the wall skin; You can choose an electric shovel and put it on the wall to polish it yourself, which is very convenient and flexible to operate.

It must be shoveled to the surface of the cement layer, and the reasons are as follows:

It has been said that the building is given to scrape white, and its workmanship and material comparison are far from the standard latex paint production needs to be compared with the batch of putty;

The wall skin given by the building must be removed, otherwise the construction standard may not all meet the standard of brushing paint;

Standard paint painting requires three batches of putty on the wall and careful and careful polishing, and then it is painted on the putty to ensure its quality and life for a long time.

If you don't have experience in decoration materials, you can't tell whether it's putty powder or gypsum powder, and you can tell it by touching it. Plaster powder rubbing the wall with your hand will not fall white ash. Putty powder is not good, there will be obvious whitening.

If it is the former kind of new house shovel wall skin is that the new house delivery to meet the delivery standards, the basic developer will set up a layer of putty on the original wall, and this layer of putty will often be due to the official business to the wall to approve a layer of engineering putty, at first the housing authority acceptance standards have just been delegated when there are many in my years of decoration work to see, many with this layer of "free putty decoration" house, the first step in decoration is to do a thorough cleaning of this layer of putty decoration, Because most people don't believe that this layer of putty decoration will be of good quality.

<> one is that there is less glue in his putty powder, and the second is not necessarily environmentally friendly, if there is less glue, it will bulge and expose the skin for a short time, so it is *** to say that after shoveling off, paint the wall twice and then scrape the putty. To cover up the uneven top of the walls resulting from the theme works, plastering and cast-in-situ. A simple scraping of the large white ash can cover up these shortcomings, so that the "prospective owner" who is looking at the house feels that the quality of the house is very good.

There is mildew on the wall, that is, you have to pay attention to observe whether there are signs of water seepage on the top surface and some places at the door of the bathroom, whether there is mildew, and other places where the color of the wall is different, if there is indeed mold.

After the wall putty is completed, the subtle gaps cannot be seen, and the putty needs to be removed before the gaps can be treated in place to ensure that the wall does not crack in the later stage. It is free to complete the renovation at the time of maintenance, which is time-consuming and laborious. First of all, the holes or eyes on the wall are filled with sand ash or putty, and after they are dry, the surface layer is fully sanded with sandpaper until it is smooth, (sandpaper is thick and then fine) and then use a brush, wool brush is better to remove the dust on the wall.

Latex paint wall: latex paint with loose substrate, scratch a cross scratch on the latex paint wall, glue a piece of tape to the scratch, and then tear it off quickly, if the tape tears off the wall skin, it means that the adhesion of the paint film is not good, and the old wall must be removed.

Yes, be sure to shovel the wall skin. Shoveling the wall skin can make the wall more flat and smooth when scraping putty, and it will also make the wall look more flat and smooth.

Hello, if, as mentioned above, there are some houses whose walls have been painted, then it is necessary to shovel the wall skin before the base treatment. The base treatment is mainly to pre-treat the cracks and unevenness of the wall, and to ensure that the wall is dry and oil-free. 2. After the base layer is repaired, further repair work should be carried out, mainly to ensure the flatness of the wall.

3. Coating interface treatment agentThe interface treatment agent is also called wall cure, and the appearance is generally milky white glue, which can fully infiltrate the wall base layer, make the base layer dense, and improve the interface adhesion of the smooth base layer. 4. Brush putty and batch putty will generally be batched twice, the first time is generally required to be scraped horizontally, and the second time is scraped vertically. After two passes, the wall is basically up to the mark.

5. In order to make the wall more flat, the wall should be polished after the putty is brushed, and the finer sandpaper should be given priority to be polished, and the project should be completed as soon as possible. 6. The effect of brushing primer primer will affect the effect of topcoat brushing, so when brushing primer, try to use a roller with the same texture as brushing topcoat.

When decorating, you must shovel the wall skin, because it is very convenient to re-apply the wall skin after shoveling the wall skin, and it is particularly smooth.

Decoration must be shoveled wall skin, because after shoveling the wall skin, it will be better to brush the wall and paint, and there will be no falling wall skin in the future, so be sure to shovel the wall skin.

When decorating a new house, most of the practice is to shovel off the original wall skin first, especially to ask the decoration company to decorate is basically a process of shoveling the wall skin, and many owners think that shoveling the wall skin will cause a lot of losses and do not approve of this practice. Should you shovel the wall skin for the decoration of the new house? Let's take a look.

At the beginning, the shovel wall skin was aimed at the original lime wall, which had poor performance in terms of stability and waterproofness, so it would be removed during the decoration, and the decoration workers would shovel it out in order not to affect the construction of the wall putty in the later stage, so as to affect the problems of wall hollowing and falling off when used. Now many conscientious developers use the new latex paint painted wall skin, which has good waterproofness, stability and quality, and does not have to worry about some quality problems, so it is okay not to eradicate the wall skin.

Whether to eradicate the new house in the decoration is mainly to see whether the wall putty, wall structure, wall construction quality and other aspects of the house meet the requirements, especially the original wall putty, if the painting is water-resistant putty, it is basically not necessary to remove the wall skin, but if the non-water-resistant putty is painted, it must be eradicated, otherwise it will be affected by the environment in use, and there will be problems such as mold on the wall. The obvious powder loss is non-water-resistant putty, or poured directly on the wall with mineral water, and the water does not flow downwards to directly expand the scope of water seepage, which is also non-water-resistant putty, which is to be eradicated and redone.

If there are problems such as falling off and hollowing of the wall putty, it means that there is a problem with the construction, and the wall skin needs to be shoveled off and redone. If there are cracks in the wall, it is very likely that the wall structure is a problem, and it is necessary to shovel off the wall skin to find out the cause and repair it.

Summary: The above is the introduction of whether to shovel the wall skin for the decoration of the new house, the purpose of the new house decoration shovel the wall skin is mainly to make the wall more likely to fall off, hollow drum and other problems, but also to allow the owner to eliminate doubts about the original wall construction quality, I hope the content shared will be helpful to everyone.