How long does it take for the floor heating to heat up in the house, and how long does it take for t

After the floor heating opens the main valve of the inlet and return water, the air in the pipe is discharged, so that the hot water can be quickly circulated, so that it will not take an hour or two for the house to heat up.

Due to the reason of the floor heating pipe laying material, the water inlet temperature of the floor heating is much lower than the heating temperature of the radiator, generally not more than 40 degrees, and in order to protect the floor heating pipe, the cushion on the belching pipe is also very thick, so the temperature in the house will not rise too fast, generally after heating for an hour, you can feel that the indoor temperature begins to rise.

1. How long does it take for the floor heating to be hot?

Under normal circumstances, it takes about two or three hours to turn on the floor heating before the indoor temperature can reach the ideal state. Generally speaking, the indoor temperature should reach more than 20 degrees, but it should not be too high, and it is best to do it below 24 degrees.

If the indoor temperature has not risen for several hours, you have to consider whether there is a problem with the floor heating, and we need to investigate one by one to solve it.

2. What are the reasons why floor heating is not hot?

1. If it is the first time to open or after a year to start using floor heating, the speed of heating will be slightly slower, and if the outdoor temperature is relatively low, only two or three hours later, the temperature can not reach the ideal state, and the opening time will be longer, and this situation is not a quality problem of floor heating, just need to wait patiently.

2. If the floor heating is still not hot after it is turned on, it may be that the sealing of the room is not particularly good, you can check whether the insulation performance of the room is good, or whether there are some windows open, the heat in the room will be dissipated, and the temperature will not reach the ideal state.

3. It is also possible that there is gas in the pipeline, which is not discharged, and some people have never discharged the gas in the pipe after using it for a long time, which will also lead to the hot water circulation is not particularly good, and the indoor temperature will not reach the ideal state.

4. It is also possible that when laying geothermal pipes, the workers were sloppy and did not construct according to the drawings, resulting in uneven laying of geothermal pipes, resulting in poor water circulation, and there will be no heat when used.

When the floor heating has just begun, it generally takes about 2-4 hours for the house to heat up, and the specific time to decide how long it takes depends on the area of the house and the insulation of the house.

If the room is relatively humid, it can take about half a day to reach the set temperature. The underfloor heating lasts about four months a year, and water separators are installed in each room to control the valves in each area, and the temperature in this area can be adjusted on each water supply valve.

Before using floor heating, you should check in detail whether the various connection parts of the floor heating are firmly connected, whether there is water leakage, and only after confirming that there is no problem, can you start to turn on the floor heating. During the use of underfloor heating, the pressure gauge of underfloor heating should be observed at all times.

Numerical values, thermometers.

If an abnormality is found, it needs to be detected and handled.

How to choose the best underfloor heating.

1. Before choosing floor heating, you need to look at the brand and reputation of the floor heating company, try to cooperate with large companies, and give better floor heating quality and better after-sales service. After all, the complexity of floor heating installation is relatively high, and it needs to be installed by professionals to reduce the potential safety hazards.

2. Whether the floor heating can play the best heating effect depends not only on the quality of the floor heating, but also on the technology of the construction personnel, and whether it can ensure the correct installation of the floor heating pipeline. Generally speaking, floor heating needs to determine the specific installation area according to the indoor layout and the orientation of the house.

3. The quality of floor heating pipes should also be selected with special care. Because the floor heating pipe is to be buried in the ground, if there is a problem with the quality of the pipe, it will not be used for a long time to be prone to water leakage, and the maintenance is a big project, and the cost of money and manpower is very large.

4. When choosing a floor heating pipe, you can't just look at its brand, but also look at the quality and environmental performance. A good underfloor heating pipe has a smooth and uniform inner and outer wall, does not produce bubbles, and the flexibility of the underfloor heating pipe.

It should also be good, and there is a relevant qualified test report.

Floor heating is slower, and it takes a long time for the temperature of the whole house to rise, if the floor heating is turned on at the initial stage, so the floor heating is generally turned on 24 hours a day. It takes about 4 hours to feel the temperature of the floor (using tiles) at the earliest, and about 16-24 hours (using wooden floors) at the slower.

Generally speaking, underfloor heating should start to heat up the day after the start of heating. The underfloor heating is just burning, and it takes about 2 to 4 hours for the house to heat up. This is due to the floor heating pipe heat dissipation to the surrounding cement sand, the cement sand gradually heats up, until it hits the floor tile or floor of 3 to 5 cm above the floor heating pipe, it takes at least a few days, the room temperature can feel the rise, and gradually reach a comfortable temperature.

The rate of heating and the temperature of the room are also related to the following factors. Mul.

1. The number of floor heating arrangements in the heating system, the heat transfer performance of the covering on the floor heating pipe, the quality of design and construction, and the water supply temperature of circulating water provided by heat source equipment (boilers, gas wall-hung boilers, etc.). Mul.

2. The degree of insulation of the room, the floor, the orientation, the material of the doors and windows, the wall insulation, the frequency of door and window switching, etc. Mul.

Underfloor heating is fast, usually about 20 minutes to heat up. Floor heating takes hot water with a temperature of no more than 60 as the heat medium, circulates in the heating pipe buried in the filling layer below the ground, heats the whole floor, and heats the room through the heat transfer mode of radiation and convection.

It is divided into two categories: water floor heating and electric floor heating from the thermal medium quality, and is divided into wet floor heating and dry floor heating from the pavement structure. From the surface decoration material, it is divided into floor type floor heating and floor tile type floor heating; Functionally, it is divided into ordinary floor heating and far-infrared floor heating.

Compared with the convection heating method of the system, the energy saving range of the floor heating system is about 20%, and the energy saving can reach 40% if the zonal temperature control device is adopted. Water underfloor heating loses less heat during transmission and the heat is concentrated in the height at which the human body benefits, even if the indoor set temperature is 2 5 lower than that of convection heating, people can have the same feeling of warmth.

Underfloor heating can generally be heated up within 3 days. If the new home is heated for the first time, the warming rate is relatively slow, and the warming process only takes a few days to reach the normal temperature. In the beginning, the temperature should increase gradually.

The water temperature on the first day was 18 degrees. The water temperature for the next two days is 25 degrees. By the third day, the water temperature can reach 30 degrees.

Finally, the water temperature rises to a normal value, i.e. 45 degrees, at which point the surface temperature is 28 to 30 degrees. The first use is not to speed up the temperature of the water too quickly, otherwise the floor is prone to cracking and twisting. It is also necessary to do this if it is used for the first time in winter.

In use, it is necessary to humidify the interior to prevent the floor from cracking and deforming. If it is normally open, when the room temperature is 5 degrees, and if the floor decoration is tiled, the thermal effect will be noticeably felt for about an hour; If it is a solid wood floor decoration, then it is slower and takes an hour of heat.

The floor heating and cold start time is long, the room temperature is 5 degrees, and it is generally obvious in 3 to 4 hours! If 5 degrees reaches 18 degrees, that's a long time!

Generally, it can warm up after 2 to 3 days after opening.

Underfloor heating can be heated up in four to twenty-four hours.

If it is the first time to turn on the floor heating, the role of the floor heating needs a certain amount of time to adapt, under normal circumstances, it takes four hours to feel the temperature of the floor at the earliest, and about 16 to 24 hours at the slatest.

And it also needs to be judged according to the overall area of the house, as well as the amount of floor covering. If the area of the house is not very large, the heating effect of floor heating is more significant, and in a short period of time, you can feel the role of floor heating; On the contrary, if the area is large, then the floor heating range is large, and the heating rate is slower.

Moreover, the floor covering will also affect the heating time of the floor heating, and the heating efficiency of the whole room will be reduced if the floor covering covers the heat released by the floor heating; With less floor covering, the heat generated by the underfloor heating can be released into the air to the maximum extent possible, increasing the overall temperature of the house.

Therefore, in general, in a room with underfloor heating, it is best to reduce the floor covering, so as to maximize the effect of underfloor heating.

Attention to underfloor heating

When using underfloor heating for the first time, the temperature must be gradually increased for the first 3 days of heating, otherwise the floor is very likely to crack or twist due to expansion.

For example, if the water temperature is 18 degrees on the first day, then the water temperature can be set to 25 degrees on the second day, and the water temperature at 30 degrees on the third day, until the fourth day can it rise to the normal water temperature of 45 degrees, and the surface temperature of 28 to 30 degrees.