-
Anonymous users2024-02-12The phenomenon of rotten at the bottom of the door sleeve in the washroom is not individual, but there are many, the idea is because the bathroom only pays attention to waterproof construction during construction, and does not pay attention to the surrounding plugging of the threshold stone, so it will cause this phenomenon, the threshold stone foundation must first do a good job of retaining water and then paste, if the threshold stone is used dry paste, it will definitely leak water in the later stage. The bathroom door cover tiles are not pasted and are not waterproofed. This kind of problem is not done well at the bottom of the waterproofing, generally two times the liquid waterproofing, one time the membrane waterproofing, followed by laying bricks to find a good slope of the sewer, perhaps the bathroom in advance to do a good job of dry and wet separation.
If the number of square meters in the bathroom is large, there will be no similar problems if the dry and wet are separated as much as possible. If the number of square meters in the bathroom is small, and there is no condition for dry and wet separation, aluminum alloy doors can be used. Now many aluminum-magnesium alloy doors have various styles and colors, and they are still very good to use.
The specific solution is that the waterproofing of the shower room should be independent, how to be independent, that is, before paving the floor tiles, place the water retaining strip (one is built by workers with red bricks, one is marble,), and then do waterproofing in the shower room.
This should be a wooden door cover, the bottom is rotten and moldy, it should be the bottom of the door cover is more wet, and then there is no anti-corrosion, try to keep the floor in the washroom dry and ventilated, so it should be much better. At present, the bathroom door is mainly made of aluminum alloy and wood, of which the aluminum alloy bathroom door is mainly in the middle and low grade, and there are also a small number of high-end decoration aluminum alloy doors, which help the aluminum alloy bathroom door from 200 yuan to 1500 yuan.
First of all, why is the lower mouth of the door sleeve black and moldy and ulcerated, in fact, it is a very simple principle, that is, the wood products encounter water, mildew and resulting in ulceration, the main water comes from the bathroom! Although it is dry and wet separation, you usually have more or less water into the bottom of the door sleeve, such as mopping the floor, there will be some water into the bottom of the door sleeve for a long time, and the door sleeve board will rot after a long time after entering the water.
-
Anonymous users2024-02-11The main reason is that there are no waterproof measures, so it will cause the bottom of the toilet door sleeve to rot.
-
Anonymous users2024-02-10It is because the toilet is very damp, so it causes things to rot, so you must pay attention to the moisture discharge in the toilet and pay attention to ventilation.
-
Anonymous users2024-02-09It should be that the inside of the toilet is damp or in disrepair, so it will cause the bottom to be rotten and corroded.
-
Anonymous users2024-02-08This is because the toilet is used very frequently, so the facilities here at the door will rot faster.
-
Anonymous users2024-02-07Rotten underside of a bathroom door can be caused by wood decay or damage caused by long-term humidity. There are several ways to fix this issue:
1.Replace the bottom edge of the door: If the bottom edge of the door is badly rotten, the best solution is to replace the entire bottom edge of the door. Suitable door underside materials can be purchased and tailored to the size and shape of the door.
2.Fill the hole: If the bottom edge of the door is only partially damaged, you can consider using wood paste or wood glue to fill in the repair. The damaged area is cleaned first, then the appropriate repair material is selected to fill in as needed, and when the material is completely dry, it can be sanded and painted.
3.Moisture-proof treatment: In order to prevent the bottom edge of the door from getting damp and decaying again, some moisture-proof measures can be taken after repair, such as painting waterproof paint or installing a sill backing plate on the old stool, so as to reduce the impact of the humid environment on the bottom edge of the door.
Regardless of which of the above methods you choose to repair the underside of the door, it is recommended that you carefully evaluate and ensure safety before operating. If you are not familiar with the repair process or are not confident about the results, it is recommended to consult a professional maintenance personnel or a pre-service brigade to replace the bottom of the door.
-
Anonymous users2024-02-06It can be wrapped in a thin piece of iron.
The hollow tiles in the toilet are caused by the fact that the cement under the tiles is not filled and paved, resulting in the hollowing of the tiles, which will cause the tiles to crumble easily.
Pregnancy is a very hard thing, in addition to enduring the changes in the body, there will be some different degrees of discomfort during pregnancy, some pregnant women will have left side back pain, although the severity varies from person to person, but will always feel uncomfortable, this situation should consider whether there is overwork or the reason for the waist cold, pay attention to rest and keep warm, the symptoms will be alleviated, there is also a reason for the hormone fluctuations in the body during pregnancy, the discomfort caused by the increased spinal cord level in the body after pregnancy, in addition, That is, after the second and third stages of pregnancy, when the abdomen is enlarged and the pregnant woman walks and moves, the bearing capacity of the waist increases, the muscles are pulled, and the walking posture is not paid attention to, resulting in unbalanced muscle force and excessive force on one side causes pain. >>>More
Causes of ceiling cracking - cracking on the surface of the paint If it is only a linear, angular or amorphous crack on the ceiling paint film, it is not a big problem. This phenomenon may be caused by the first time, such as too thick or not dry and heavy, too loose or rough base, and mismatch between primer and topcoat. >>>More
The general cause is caused by frequent anger and tantrums, so we women must protect themselves, and avoid frequent anger in life, and should also adjust their mentality, maintain a positive and optimistic attitude, so that to a certain extent, we can avoid the danger of breast hyperplasia.
Pork and wolfberry soup is a very nutritious dish, if you have panic after eating, it is likely to be other diseases, and you should seek medical attention in time.