If a small two story house is built in the countryside, how should the roof be insulated?

The most traditional method is to rearrange the roof with concrete cement to enhance the thickness of the roof and thus insulate the house.

Even when we are indoors, we can feel the heat of the scorching heat. At this time, the insulation of the roof is very important. There are quite a few friends who don't knowWhich material is better for roof insulation

Iron tile we have here is generally sixteen or seventeen yuan a meter, resin tile is 28 30 yuan a meter, if your floor is more than 100 square meters, it is only more than 1,000 yuan (if you ask those who build a shed to help you build, it may be a little more expensive).

<> often exposed to wind and rain, it will cause the service life of the house. Building a house in the countryside is not easy, and it takes almost half of a lifetime's savings, so we have to protect it. Building a house is created for the next generation, creating happiness for children and extending the life of the house.

When it is windy and rainy, the sound is too loud, if there are children at home, you can't sleep well, because it is just a layer of iron sheet, there is not such a strong sound insulation effect, and the sound of rain is louder than the sound of falling on the ground.

Generally, rural self-built houses, especially some of the longer ones, have more or less water leakage, and the wall will be damp on a rainy day, of course, the leak-proof function, a little bit, but now which rural house is built is basically cast-in-place floor slab, waterproof treatment is very good, basically will not leak. So, cover it, if you don't cover it, you'll regret it! In the rainy season, it rains for three or four days, and the rain can flow down the wall.

Building a tin house can solve this problem very well.

Yes, many of us have built the iron shed, because the floor will leak after a long time, and now the state is not allowed to add to the construction to be built, but it is difficult to apply for construction, and it is generally not possible to apply for construction, so it is the best choice to cover the iron shed, and it can be insulated and leakage-proof.

It was already leaking, and it was difficult to repair it, so simply build a tin house on the roof. Therefore, there are still big problems with the quality of the current buildings, and most of them will leak after a few years. A small number of people build tin houses on the roof just to block the sun, and basically the house is leaking.

The insulation of the roof can be pasted on the roof of the building with insulating cotton, you can also paste the insulated resin tile, and you can also build a layer of iron shed, these thermal insulation methods can be used, and the effect is good.

When building a house, we try to use some insulation cotton on the roof, because this will have a good effect, and it will also be able to keep warm in winter.

Rural roofs are insulated, and foam concrete is relatively better.

1. Roof greening and insulation: If you are a person who likes flowers and gardening, you can spread a layer of soil on the roof and plant your favorite flowers and plants, or you can grow vegetables, which not only has a thermal insulation effect, but also can effectively use the space, killing two birds with one stone. Features:

The thermal insulation effect is good, but the roof greening must take into account the load-bearing capacity of the roof, and the crops must not corrode the building.

2. Water insulation method: water is a good heat conduction fluid, therefore, it can also store water and insulate on the roof, the deeper the water layer, the better the insulation effect, this method has higher requirements for the quality of the roof, now many houses use this thermal insulation method, the roof is usually a shallow puddle, about 15 cm deep, this roof insulation method can effectively and reasonably reduce the indoor temperature is also relatively simple. Features:

To use water insulation, the quality of the roof must be passed, otherwise it will cause a series of problems such as water seepage, and the water quality must also be passed to avoid corrosion of the ceiling.

3. Paving solid insulation layer: paving thermal insulation materials on the roof surface, such as laying large-step bricks, piling cinders, piling soil, piling slag, concrete slabs, piling gravel, aluminum foil, thermal insulation bricks, etc. Features:

It is necessary to have enough thickness to play the role of thermal insulation and cooling of the top floor, and also consider the load-bearing problem of the floor. After the insulation layer is made, it is necessary to make a waterproof layer with linoleum or waterproof paint on it.

Enter the area and get the decoration for free**].

Rural areas basically build their own houses and create the pattern they want, but they should also pay attention to the thermal insulation measures on the top floor, so as not to have a greater impact on the later residence. So how to insulate the second floor of the rural building, and what are the insulation materials, do you know? Now let's take a look.

1. How to insulate a two-story building in rural areas 1. Build a shed with a height of 30cm on the roof of the building, so that the roof is not exposed to the sun and has strong heat insulation; 2. Laying a layer of soil on the roof of the building can also play a role in heat insulation for Zhaoye, and it can also plant flowers and vegetables on the soil; 3. Spread tin foil on the roof of the building to reflect the light; 4. Build a pool on the roof of the building, which can absorb heat well, but it should be waterproof. 2. What are the thermal insulation materials 1. EPS board, its thermal conductivity is roughly around, which can play a good thermal insulation function, and it is also relatively cheap. However, it should be noted that its strength is not very high, so it is necessary to pay attention to the later maintenance.

2. XPS board, its thermal conductivity is roughly around, not only has high strength, but also has strong thermal insulation performance, and can also play a moisture-proof role when used at ordinary times, but it is expensive and the construction is more troublesome. 3. Rock wool board, its thermal conductivity is roughly around, with the functions of fire prevention, flame retardant and moisture resistance, bringing comfortable home life to people's home life, but its thermal insulation performance is relatively poor. 4. The thermal conductivity of rubber powder polystyrene particles is roughly around, and the flame retardancy is relatively high, but the construction requirements are relatively high, and they cannot be used for the first time, otherwise the thermal insulation effect will be reduced.

5. Polyurethane foam material, its thermal conductivity is roughly around, with good waterproof performance and good heat preservation, but it is expensive to buy and is not suitable for ordinary families. About how to insulate two-story buildings in rural areas, and what are the thermal insulation materials, I will introduce it here, do you know about it? The thermal insulation effect of the two-story building in the countryside must be done well, otherwise the second floor will not be able to live at all, and a large amount of space will be wasted.

Do the math how much it will cost you to renovate your home

Rural roof insulation:

1. Naked floor: cold in winter and hot in summer, high power consumption of air conditioning, thermal expansion and contraction of floor slab and easy cracks.

2. Cement board and tile insulation: poor thermal insulation effect, large weight, unsightly, short life and low cost.

3. Color steel plate heat insulation: the heat insulation effect is good, the rain is noisy, the rust life is short, and the cost is about 100 yuan m2.

4. Thermal insulation of foam plastic board: the thermal insulation effect is good, the lower layer is soft and void and easy to hollow, it is easy to accumulate water without bonding with the floor slab, and the life is short and the cost is high.

5. Thermal insulation of foam concrete: optimize additives and other ingredients, develop a mixer, solve the problem of difficult bonding between polystyrene foam particles and cement, overcome the shortcomings of the above-mentioned thermal insulation technology, and have a good trial effect on the roof of their own buildings, which can be used as thermal insulation layers, walls, tiles, etc. The performance is as follows:

1) Low density: 700 kg m3, which is 1 4 of ordinary concrete, can float in water, reduce the load of the building.

2) Good thermal insulation performance: thermal conductivity, 5 cm thick thermal insulation performance is slightly the same as 1 meter thick brick wall, indoor warm in winter and cool in summer, theoretical air conditioning power days. m2, most of the time there is no need to turn on the air conditioning, and protect the floor slab from thermal expansion and contraction cracking.

3) High compressive strength: It can be stepped on and dried by people.

4) Stable and long life: bonded with the building, with the same life as the building.

7) The site is pounded as a whole, smooth and beautiful, improves the waterproof and impermeability resistance, and can be easily eradicated when adding buildings.

The roof is insulated, and it is better to use foam concrete.

The roof of the building is made of slope roof, or the overhead layer can be used to achieve the purpose of heat insulation.

It is still necessary to install air conditioning, otherwise it will still be hot.

Shanghai Nanling Industry and Trade**** One tile solves the problem.