Is it necessary to do waterproofing of the slope cast in place roof of rural self built houses?

In today's rural areas, self-built houses can be said to be more and more beautiful, from the previous tile houses to bungalows, and then to the current villas, it can be seen from this that the lives of the people are getting better and better.

The roof of the villa is mostly a sloping roof, so is it necessary to do waterproofing for the slope of the self-built house? I don't think it's necessary to do waterproofing, why do you say that?downTake a look at my analysis.

The reason for doing waterproofing.

1: Water seepage caused by water accumulation caused by unsmooth flowing water.

Water will accumulate on the premise of a long period of unsmooth flow, and if there is a gap in the bottom layer, the water will penetrate down the gap.

2: Infiltration has occurred.

The phenomenon of infiltration has occurred on the wall or floor, on the one hand, it is the problem of the above-mentioned water accumulation, and on the other hand, the quality of the wall or ground. In this case, it is necessary to do waterproofing.

Do you want to make waterproofing for sloping roofs.

The sloping roof of the self-built house is made ofReinforced concreteThe general slope is about 25 30 degrees, and such a slope will not cause the problem of unsmooth flow and water accumulation.

2: The surface of the inclined roof will generally be pavedGlazed tiles, The surface of the glazed tile has a very good glaze, and the glaze itself has strong waterproof performance. In addition, when paving glazed tiles, it is pressed down one by one, and there will be no water backfilling through the gaps.

What are the needs of self-built houses to do waterproofing.

The bathroom, exterior wall, and flat roof of the self-built house basically have to be waterproofedThis is because when building a self-built house, pouring the floor and painting the wall are all manually stirred and operated, which is also prone to wall hollowing.

Cracking, cracking and uneven thickness of floors, which are most prone to water seepage.

Conclusion. The slope cast-in-situ surface of the rural self-built house does not need to be waterproof, this is because the slope will not cause water accumulation, how can it form leakage without water accumulation, not to mention that the slope roof has a strong waterproof glazed tile on the surface, and the roof of the rural area is mainly to withstand rain, unlike the bathroom shower in the city, and the laundry water accumulates more. Moreover, the cost of waterproofing is too high, the area of the roof is large, and it still requires technology and labor to do waterproofing.

No. As long as the sloping roof is guaranteed to be good, there is no need to do waterproofing, and the rainwater will slip away along the eaves by itself.

I don't think it's necessary, because doing a slope can play a role in draining water and won't leak.

Waterproofing must be done, although the rainwater retention time is short when it rains, but it is easy to seep water, and water seepage is pervasive.

I think the slope top has the following advantages:

The first advantage is aesthetics. Compared with the previous monotonous red tile houses and other houses, as well as the previous rigid flat roof houses, the slope roof has the advantages of aesthetics, and the slope roof can also be designed with different shapes, different regular patterns, and different colors.

Comparatively speaking, the former tiled houses and flat-roofed houses were a bit dull. Of course, this must be removed, classical beauty, I have always felt that it is unique, not easy to be surpassed.

The second advantage is heat preservation, heat insulation, and sun protection. In winter, it has the function of heat preservation, because it is equivalent to adding a layer of protection outside, and the wind and cold are blocked outside.

In the summer, it will play a role in sun protection. There is no need to make a special insulation layer anymore. The top floor has a slope roof, so if you live on the second floor, it won't look so hot, and if you live on the first floor, this advantage will be even more obvious.

The third advantage is the increased space. With the addition of a ramp roof, under the ramp roof, it is equivalent to being indoors, and it can be used as a storage room. Of course, the storage room doesn't take up much space.

It can also be specially separated into a room, and if it is made into glass, you can bask in the sun or something. You can also drink tea, what a wonderful time. Of course, you can also dry your laundry without worrying about rain.

The fourth advantage is that it is leak-proof. In fact, water leakage in flat-roofed houses is a very serious problem. On the road, we often see cars shouting for professional roof repairs.

However, after the slope roof is made, these problems will be solved, and there will be no water leakage and rain leakage due to the long time of the flat roof or technical problems, and there is no need to make a leak-proof layer for the flat roof.

Do not do the top of the slope, or it depends on their actual situation, of course, if you can do it, it is best to do it, the top of the slope has many advantages, in the above of these articles, it is completely flat top does not have.

Of course, the flat top layer also has its own advantages, in the former countryside, the biggest advantage of the flat top layer is used to dry grain, but this effect, especially after the emergence of the two-layer flat top layer, this function is gradually weakened.

Personally, I think that the slope top still has an advantage, both from an aesthetic and practical point of view, it has outperformed the flat top layer.

1.Convenient construction: pouring the flat roof first can reduce the construction difficulty of the cast-in-place slope roof in the later stage, and the flat roof can be used as an operating platform for pouring the sloping roof.

2.Improve the safety factor: the flat roof can be used as a safety platform, which is convenient for workers to stand on the flat roof during construction, and the flat roof can fix the template to ensure the stability and safety of the formwork.

3.Beautiful and practical: the flat roof can be made into a flower bed or terrace, which is not only beautiful, but also can be used as a place for leisure and entertainment.

4.Material saving: When making a sloping roof, it can save the cost of tiles and insulation materials.

5.Convenient to make gutters: The gutters can be directly built on the flat roof, which is convenient and fast, and will not affect the structural stability of the sloping roof.

6.Thermal insulation and heat dissipation: Since there is an attic between the flat roof and the roof, the performance of the self-built house can be improved in winter and cool in summer.

To sum up, the advantages of pouring flat roofs and then making slope roofs for rural self-built houses are convenient construction, improving the safety factor, beautiful and practical, saving materials, facilitating guttering, heat preservation and heat dissipation, etc.

Don't pour the top first and then do the slope top.

Otherwise, it's a waste of money, and it's not necessary.

First of all, it is worth considering what form of roofing is employed.

The one-time construction can be completed.

Secondly, it depends on where it is.

What form does everyone use for roofing?

Whether it's a sloped top or a flat top, just choose one.

In addition to the problems that are prone to waterproofing, the heat insulation and heat dissipation functions of the flat-roofed houses are also very poor, so now most of the rural self-built houses have returned to the slope top of the past. As for the problem of directly making the slope top of reinforced concrete, not doing the flat top for the time being, this approach is completely okay.

The advantages and construction process requirements of cast-in-situ slope roofs of rural self-built houses.

The cast-in-situ slope roof of rural self-built houses is generally suitable for rural cottages, which can highlight the unusual architectural style. At the same time, because the slope top is cast-in-place reinforced concrete, the glazed tiles of the later decoration are also cement mortar paving, which can basically be done once and for all, and no longer need to be maintained in the later stage, which can ensure quality and safety.

However, as the problem said, the rural self-built houses that do not do flat roofs directly do slope roofs, the construction difficulty is relatively large, especially the difficulty of mold installation will increase a lot, because the height increases, and the requirements for mold installation are also relatively high, so this is also a problem that has to be considered.

In response to this situation, the general solution in rural areas is to have a two-tier shelf.

The first layer frame first lays out the slab position of the whole area, and then supports the formwork structure of the entire slope top from the slab frame, although this method is more wasteful of labor and materials, but it is safe and secure.

Rural self-built houses are cast-in-situ slope roofs, and it is necessary to hang flat roofs for heat insulation.

The cast-in-situ slope roof of the rural self-built house, although there are paved glazed tiles and the increase in height, the thermal insulation effect will still be relatively poor, which may be slightly better than the flat roof structure, so it is completely necessary to hang the flat roof for heat insulation and modeling at the same time.

For such a suspended ceiling, I personally think that the first thing to do is to use the floor slab to lay a plane, so that the spire space above can also be made into a small attic. Then the bottom is made into a ceiling shape, which not only looks comfortable, but also very practical.

In general, for the cast-in-situ slope roof of the rural self-built house, it is completely possible not to do the flat roof in the early stage, and when all the later decoration is done, then use the ceiling to do the modeling, not only can be insulated, but also can save a cast-in-place flat roof cost, the quality and safety of the house is not any impact.

I don't think it's okay to do a flat top at the bottom. Because this will affect the safety of the house. I feel very troublesome to hang it after the decoration in the later stage, so I might as well do it at one time at the beginning.

OK. It is more advantageous not to make a flat in terms of cost and construction period. Moreover, the light steel structure or floor slab material used for later decoration can be used, and it is safer than directly pouring a sloped roof in terms of load-bearing.

At present, most of the self-built houses in rural areas use cast-in-place roofs, and the bottom is not flattened in the early stage, and then hung flat after all the decoration is completed. In this way, it can be insulated, and there is also a cost of cast-in-place flat top.

You're a wooden structure, right?

Cast-in-place slope roofs should pay attention to the skeleton of the roof, especially the seismic performance of the wood-framed brick-concrete house is poor, and the overweight roof is also a burden.

Summary. Hello dear! <>

The roof of a rural self-built house can be covered with a slope, but the inclination and slope of the slope need to be determined according to the specific situation. Considerations for slope design include rainfall drainage, waterproofing, and leakage. In addition, the construction of the slope also needs to consider factors such as the load-bearing capacity of the roof structure and the construction process.

Compared with flat roofs, sloping roofs have a very good thermal insulation effect on the lower living space, and the lower space can also be developed and utilized, and sometimes even used as housing. However, the cost of a pitched roof is higher than that of a flat roof. And flat roofs also have the advantage of being made into a roof platform or a sky garden.

However, the disadvantage of flat roofs is that thermal insulation is difficult to solve, so it has a certain impact on the temperature of the lower use space, and flat roofs are more prone to water leakage. Now back to the countryside to build a house, the budget is enough or choose a slope roof, not only beautiful shape, but also thermal insulation, and as long as the gutter waterproofing, there is basically no need to worry about water leakage.

Can the roof of a self-built house in a rural area be covered with a slope?

Hello dear! <>

The roof of a rural self-built house can be covered with a slope, but the inclination and slope of the slope need to be determined according to the specific situation. Considerations for slope design include rainfall drainage, waterproofing, and leakage. In addition, the construction of the slope also needs to consider factors such as the load-bearing capacity of the roof structure and the construction process.

Compared with the flat roof, the sloping roof has a very good thermal insulation effect on the lower living space, and the lower empty source excavation can also be used for spring development, and sometimes even can be used as housing. However, the cost of a pitched roof is higher than that of a flat roof. And flat roofs also have the advantage of being made into a roof platform or a sky garden.

However, the disadvantage of flat roofs is that thermal insulation is difficult to solve, so it has a certain impact on the temperature of the lower use space, and flat roofs are more prone to water leakage. Now back to the countryside to build a house, the budget is enough or choose a slope roof, not only beautiful shape, but also thermal insulation, and as long as the gutter waterproofing, there is basically no need to worry about water leakage.

Dear, you can freely choose the style design of the roof.